Re: Problems installing 4.9 on IBM Xseries server
Jason Williams wrote: Did some research and it appears that these IBM servers using ServRAID use the IPS Scsi host adaptor. Anyone know if 4.9 supports this or if there is a way to load the driver a different way? I do appreciate it. Jason At 01:04 PM 11/6/2003 -0800, you wrote: Hello everyone. Running into a bit of a problem installing 4.9 on a IBM X series server. The server has 3 SCSI drives with a servRAID card. I have RAID 5 configured on it. 4.9 did not detect the drives, so im wondering if it even supports it or if there is a driver I can d/l to use and boot to it. Here is some output from a second server running *coughLinuxcough*: SvrWks CSB5: IDE controller at PCI slot 00:0f.1 SvrWks CSB5: chipset revision 147 SvrWks CSB5: not 100% native mode: will probe irqs later SvrWks CSB5: simplex device: DMA forced ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA SvrWks CSB5: simplex device: DMA forced ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:DMA, hdd:DMA SCSI subsystem driver Revision: 1.00 Warning: Adapter 0 Firmware Compatible Version is MR600, but should be SA510 Warning: Adapter 0 BIOS Compatible Version is MR600, but should be SA510 Warning ! ! ! ServeRAID Version Mismatch scsi0 : IBM PCI ServeRAID 5.10.21 Vendor: IBM Model: SERVERAID Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 Vendor: IBM Model: SERVERAID Rev: 1.00 Type: Processor ANSI SCSI revision: 02 Vendor: IBM Model: 32P0032a S320 1 Rev: 1 Type: Processor ANSI SCSI revision: 02 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Any suggestions are appreciated. Jason ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" Hi Jason- this may not be of any direct help, but could be worth a shot. Looking at your Linux boot messages, it looks like your firmware and driver versions are off. I've seen this cause a fair number of issues- you should be able to get a flash disk on IBMs support site, as well as the updated Linux driver at least. I suppose the big question is what version of the firmware the BSD driver wants? Scott ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problems installing 4.9 on IBM Xseries server
Did some research and it appears that these IBM servers using ServRAID use the IPS Scsi host adaptor. Anyone know if 4.9 supports this or if there is a way to load the driver a different way? I do appreciate it. Jason At 01:04 PM 11/6/2003 -0800, you wrote: Hello everyone. Running into a bit of a problem installing 4.9 on a IBM X series server. The server has 3 SCSI drives with a servRAID card. I have RAID 5 configured on it. 4.9 did not detect the drives, so im wondering if it even supports it or if there is a driver I can d/l to use and boot to it. Here is some output from a second server running *coughLinuxcough*: SvrWks CSB5: IDE controller at PCI slot 00:0f.1 SvrWks CSB5: chipset revision 147 SvrWks CSB5: not 100% native mode: will probe irqs later SvrWks CSB5: simplex device: DMA forced ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA SvrWks CSB5: simplex device: DMA forced ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:DMA, hdd:DMA SCSI subsystem driver Revision: 1.00 Warning: Adapter 0 Firmware Compatible Version is MR600, but should be SA510 Warning: Adapter 0 BIOS Compatible Version is MR600, but should be SA510 Warning ! ! ! ServeRAID Version Mismatch scsi0 : IBM PCI ServeRAID 5.10.21 Vendor: IBM Model: SERVERAID Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 Vendor: IBM Model: SERVERAID Rev: 1.00 Type: Processor ANSI SCSI revision: 02 Vendor: IBM Model: 32P0032a S320 1 Rev: 1 Type: Processor ANSI SCSI revision: 02 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Any suggestions are appreciated. Jason ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problems installing 4.9 on IBM Xseries server
It says for 4.9, under hardware: ServerWorks CSB5 ATA66/ATA100 Well, isn't that what I have? Jason At 01:04 PM 11/6/2003 -0800, you wrote: Hello everyone. Running into a bit of a problem installing 4.9 on a IBM X series server. The server has 3 SCSI drives with a servRAID card. I have RAID 5 configured on it. 4.9 did not detect the drives, so im wondering if it even supports it or if there is a driver I can d/l to use and boot to it. Here is some output from a second server running *coughLinuxcough*: SvrWks CSB5: IDE controller at PCI slot 00:0f.1 SvrWks CSB5: chipset revision 147 SvrWks CSB5: not 100% native mode: will probe irqs later SvrWks CSB5: simplex device: DMA forced ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA SvrWks CSB5: simplex device: DMA forced ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:DMA, hdd:DMA SCSI subsystem driver Revision: 1.00 Warning: Adapter 0 Firmware Compatible Version is MR600, but should be SA510 Warning: Adapter 0 BIOS Compatible Version is MR600, but should be SA510 Warning ! ! ! ServeRAID Version Mismatch scsi0 : IBM PCI ServeRAID 5.10.21 Vendor: IBM Model: SERVERAID Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 Vendor: IBM Model: SERVERAID Rev: 1.00 Type: Processor ANSI SCSI revision: 02 Vendor: IBM Model: 32P0032a S320 1 Rev: 1 Type: Processor ANSI SCSI revision: 02 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Any suggestions are appreciated. Jason ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Problems installing 4.9 on IBM Xseries server
Hello everyone. Running into a bit of a problem installing 4.9 on a IBM X series server. The server has 3 SCSI drives with a servRAID card. I have RAID 5 configured on it. 4.9 did not detect the drives, so im wondering if it even supports it or if there is a driver I can d/l to use and boot to it. Here is some output from a second server running *coughLinuxcough*: SvrWks CSB5: IDE controller at PCI slot 00:0f.1 SvrWks CSB5: chipset revision 147 SvrWks CSB5: not 100% native mode: will probe irqs later SvrWks CSB5: simplex device: DMA forced ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA SvrWks CSB5: simplex device: DMA forced ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:DMA, hdd:DMA SCSI subsystem driver Revision: 1.00 Warning: Adapter 0 Firmware Compatible Version is MR600, but should be SA510 Warning: Adapter 0 BIOS Compatible Version is MR600, but should be SA510 Warning ! ! ! ServeRAID Version Mismatch scsi0 : IBM PCI ServeRAID 5.10.21 Vendor: IBM Model: SERVERAID Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 Vendor: IBM Model: SERVERAID Rev: 1.00 Type: Processor ANSI SCSI revision: 02 Vendor: IBM Model: 32P0032a S320 1 Rev: 1 Type: Processor ANSI SCSI revision: 02 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Any suggestions are appreciated. Jason ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"