Now problems with mouse and sound (Re: In addition to - 7.2 panic during installation : AP #1 (PHY# 1) failed !)
Hi, After 6-7 reboots, I managed to get the 7.2-RELEASE installation media to boot and install properly. 2 issues still remain however. 1) No sound : My Gigabyte GA-MA78GM-US2H board has onboard Realtek High Definition Audio. Since I couldn't figure out which driver would work with this, I put sound_enable=YES and snd_driver_load=YES in loader.conf to load all available drivers. Gnome's Volume Control applet still remains crossed out in red, which would mean the system couldn't locate an appropriate driver. 2) No mouse : I am using a Logitech USB mouse and my rc.conf has moused_enable=YES, along with entries for the AUTO protocol and the /dev/ums0 device. However, at boot-time I get the message Module uhub/ums failed to load : 17 followed by a complaint by moused that /dev/ums0 does not exist. There is no mouse cursor on the console at the time I get to the login prompt. There is a wierd way however of getting the mouse to work. Change it from one USB port to another 1-2 times and finally the kernel picks up the mouse and creates /dev/ums0, after which the cursor appears and the mouse works okay. But I have to do this everytime I boot FreeBSD, which doesn't look an attractive option at all. Can somebody please help me with either/both of these issues ? Thanks in advance. Manish Jain invalid.poin...@gmail.com 2009/6/18 Chris Whitehouse cwhi...@onetel.com Manish Jain wrote: I forgot to mention that Windows installs and runs very smoothly on the system. Windows system information reports : System ManufacturerGigabyte Technology Co., Ltd. System Model GA-MA78GM-US2H snip The only thing that strikes me as odd is that right-clicking on My Computer reports the amount of RAM as 768 MB, while the diagnostics above states 1024 MB. For the brief period of time the FreeBSD installer runs, it reports the amount of RAM as 768 MB too. http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?ProductID=2995 has integrated graphics = shared memory. You can probably change the amount of RAM allocated to the graphics card in the BIOS. Chris ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
RE: In addition to - 7.2 panic during installation : AP #1 (PHY# 1) failed !
Hmmm, seems to me the easy solution then is to run Wind0ze j/k... -Original Message- From: owner-freebsd-questi...@freebsd.org [mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Manish Jain Sent: Wednesday, June 17, 2009 4:21 PM To: FreeBSD Mailing List Subject: In addition to - 7.2 panic during installation : AP #1 (PHY# 1) failed ! I forgot to mention that Windows installs and runs very smoothly on the system. Windows system information reports : System Manufacturer Gigabyte Technology Co., Ltd. System Model GA-MA78GM-US2H System Type X86-based PC Processor x86 Family 16 Model 2 Stepping 3 AuthenticAMD ~2304 Mhz BIOS Version/Date Award Software International, Inc. F2, 02-Jan-09 SMBIOS Version2.4 Total Physical Memory 1,024.00 MB [Conflicts/Sharing] Resource Device I/O Port 0x-0x0CF7PCI bus I/O Port 0x-0x0CF7Direct memory access controller I/O Port 0x03C0-0x03DFPCI standard PCI-to-PCI bridge I/O Port 0x03C0-0x03DFATI Radeon HD 3200 Graphics Memory Address 0x-0x0FFF Motherboard resources Memory Address 0x-0x0FFF System board Memory Address 0xFDE0-0xFDFF PCI standard PCI-to-PCI bridge Memory Address 0xFDE0-0xFDFF ATI Radeon HD 3200 Graphics IRQ 22Standard Dual Channel PCI IDE Controller IRQ 22Texas Instruments OHCI Compliant IEEE 1394 Host Controller IRQ 16Standard OpenHCD USB Host Controller IRQ 16Standard OpenHCD USB Host Controller IRQ 16Microsoft UAA Bus Driver for High Definition Audio Memory Address 0xD000-0xDFFF PCI standard PCI-to-PCI bridge Memory Address 0xD000-0xDFFF ATI Radeon HD 3200 Graphics IRQ 18ATI Radeon HD 3200 Graphics IRQ 18PCI standard PCI-to-PCI bridge IRQ 18Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC IRQ 18Standard OpenHCD USB Host Controller IRQ 18Standard OpenHCD USB Host Controller IRQ 18Standard OpenHCD USB Host Controller IRQ 19Microsoft UAA Bus Driver for High Definition Audio IRQ 19Standard Enhanced PCI to USB Host Controller Memory Address 0xA-0xBPCI bus Memory Address 0xA-0xBPCI standard PCI-to-PCI bridge Memory Address 0xA-0xBATI Radeon HD 3200 Graphics I/O Port 0x03B0-0x03BBPCI standard PCI-to-PCI bridge I/O Port 0x03B0-0x03BBATI Radeon HD 3200 Graphics [DMA] Resource Device Status Channel 4 Direct memory access controller OK [Forced Hardware] DevicePNP Device ID [I/O] Resource Device Status 0x-0x0CF7 PCI bus OK 0x-0x0CF7 Direct memory access controller OK 0x0D00-0x PCI bus OK 0xE000-0xEFFF PCI standard PCI-to-PCI bridge OK 0x03B0-0x03BB PCI standard PCI-to-PCI bridge OK 0x03B0-0x03BB ATI Radeon HD 3200 Graphics OK 0x03C0-0x03DF PCI standard PCI-to-PCI bridge OK 0x03C0-0x03DF ATI Radeon HD 3200 Graphics OK 0xEE00-0xEEFF ATI Radeon HD 3200 Graphics OK 0xD000-0xDFFF PCI standard PCI-to-PCI bridge OK 0xDC00-0xDCFF Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NICOK 0xFF00-0xFF07 Standard Dual Channel PCI IDE Controller OK 0xFE00-0xFE03 Standard Dual Channel PCI IDE Controller OK 0xFD00-0xFD07 Standard Dual Channel PCI IDE Controller OK 0xFC00-0xFC03 Standard Dual Channel PCI IDE Controller OK 0xFB00-0xFB0F Standard Dual Channel PCI IDE Controller OK 0xFA00-0xFA0F Standard Dual Channel PCI IDE Controller OK 0x01F0-0x01F7 Primary IDE Channel OK 0x03F6-0x03F6 Primary IDE Channel OK 0x0170-0x0177 Secondary IDE Channel OK 0x0376-0x0376 Secondary IDE Channel OK 0x0A79-0x0A79 ISAPNP Read Data Port OK 0x0279-0x0279 ISAPNP Read Data Port OK 0x0274-0x0277 ISAPNP Read Data Port OK 0x4100-0x411F Motherboard resources OK 0x0228-0x022F Motherboard resources OK 0x0238-0x023F Motherboard resources OK 0x040B-0x040B Motherboard resources OK 0x04D6-0x04D6 Motherboard resources OK 0x0C00-0x0C01 Motherboard resources OK 0x0C14-0x0C14 Motherboard resources OK 0x0C50-0x0C52 Motherboard resources OK
Re: In addition to - 7.2 panic during installation : AP #1 (PHY# 1) failed !
Gary Gatten wrote: Hmmm, seems to me the easy solution then is to run Wind0ze j/k... -Original Message- From: owner-freebsd-questi...@freebsd.org [mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Manish Jain Sent: Wednesday, June 17, 2009 4:21 PM To: FreeBSD Mailing List Subject: In addition to - 7.2 panic during installation : AP #1 (PHY# 1) failed ! I forgot to mention that Windows installs and runs very smoothly on the system. Windows system information reports : System Manufacturer Gigabyte Technology Co., Ltd. System ModelGA-MA78GM-US2H System Type X86-based PC Processor x86 Family 16 Model 2 Stepping 3 AuthenticAMD ~2304 Mhz BIOS Version/Date Award Software International, Inc. F2, 02-Jan-09 SMBIOS Version 2.4 Total Physical Memory 1,024.00 MB [Conflicts/Sharing] ResourceDevice I/O Port 0x-0x0CF7 PCI bus I/O Port 0x-0x0CF7 Direct memory access controller I/O Port 0x03C0-0x03DF PCI standard PCI-to-PCI bridge I/O Port 0x03C0-0x03DF ATI Radeon HD 3200 Graphics Memory Address 0x-0x0FFFMotherboard resources Memory Address 0x-0x0FFFSystem board Memory Address 0xFDE0-0xFDFFPCI standard PCI-to-PCI bridge Memory Address 0xFDE0-0xFDFFATI Radeon HD 3200 Graphics IRQ 22 Standard Dual Channel PCI IDE Controller IRQ 22 Texas Instruments OHCI Compliant IEEE 1394 Host Controller IRQ 16 Standard OpenHCD USB Host Controller IRQ 16 Standard OpenHCD USB Host Controller IRQ 16 Microsoft UAA Bus Driver for High Definition Audio Memory Address 0xD000-0xDFFFPCI standard PCI-to-PCI bridge Memory Address 0xD000-0xDFFFATI Radeon HD 3200 Graphics IRQ 18 ATI Radeon HD 3200 Graphics IRQ 18 PCI standard PCI-to-PCI bridge IRQ 18 Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC IRQ 18 Standard OpenHCD USB Host Controller IRQ 18 Standard OpenHCD USB Host Controller IRQ 18 Standard OpenHCD USB Host Controller IRQ 19 Microsoft UAA Bus Driver for High Definition Audio IRQ 19 Standard Enhanced PCI to USB Host Controller Memory Address 0xA-0xB PCI bus Memory Address 0xA-0xB PCI standard PCI-to-PCI bridge Memory Address 0xA-0xB ATI Radeon HD 3200 Graphics I/O Port 0x03B0-0x03BB PCI standard PCI-to-PCI bridge I/O Port 0x03B0-0x03BB ATI Radeon HD 3200 Graphics [DMA] ResourceDevice Status Channel 4 Direct memory access controller OK [Forced Hardware] Device PNP Device ID [I/O] ResourceDevice Status 0x-0x0CF7 PCI bus OK 0x-0x0CF7 Direct memory access controller OK 0x0D00-0x PCI bus OK 0xE000-0xEFFF PCI standard PCI-to-PCI bridge OK 0x03B0-0x03BB PCI standard PCI-to-PCI bridge OK 0x03B0-0x03BB ATI Radeon HD 3200 Graphics OK 0x03C0-0x03DF PCI standard PCI-to-PCI bridge OK 0x03C0-0x03DF ATI Radeon HD 3200 Graphics OK 0xEE00-0xEEFF ATI Radeon HD 3200 Graphics OK 0xD000-0xDFFF PCI standard PCI-to-PCI bridge OK 0xDC00-0xDCFF Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NICOK 0xFF00-0xFF07 Standard Dual Channel PCI IDE Controller OK 0xFE00-0xFE03 Standard Dual Channel PCI IDE Controller OK 0xFD00-0xFD07 Standard Dual Channel PCI IDE Controller OK 0xFC00-0xFC03 Standard Dual Channel PCI IDE Controller OK 0xFB00-0xFB0F Standard Dual Channel PCI IDE Controller OK 0xFA00-0xFA0F Standard Dual Channel PCI IDE Controller OK 0x01F0-0x01F7 Primary IDE Channel OK 0x03F6-0x03F6 Primary IDE Channel OK 0x0170-0x0177 Secondary IDE Channel OK 0x0376-0x0376 Secondary IDE Channel OK 0x0A79-0x0A79 ISAPNP Read Data Port OK 0x0279-0x0279 ISAPNP Read Data Port OK 0x0274-0x0277 ISAPNP Read Data Port OK 0x4100-0x411F Motherboard resources OK 0x0228-0x022F Motherboard resources OK 0x0238-0x023F Motherboard resources OK 0x040B-0x040B Motherboard resources OK 0x04D6-0x04D6 Motherboard resources OK 0x0C00-0x0C01 Motherboard resources OK 0x0C14-0x0C14 Motherboard resources OK 0x0C50-0x0C52 Motherboard resources OK 0x0C6C-0x0C6D Motherboard resources OK 0x0C6F-0x0C6F
Re: In addition to - 7.2 panic during installation : AP #1 (PHY# 1) failed !
The only thing that strikes me as odd is that right-clicking on My Computer reports the amount of RAM as 768 MB, while the diagnostics above states 1024 MB. For the brief period of time the FreeBSD installer runs, it reports the amount of RAM as 768 MB too. Don't you have shared-memory GFX controller and allocated 256MB for it? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: In addition to - 7.2 panic during installation : AP #1 (PHY# 1) failed !
Manish Jain wrote: I forgot to mention that Windows installs and runs very smoothly on the system. Windows system information reports : System ManufacturerGigabyte Technology Co., Ltd. System ModelGA-MA78GM-US2H snip The only thing that strikes me as odd is that right-clicking on My Computer reports the amount of RAM as 768 MB, while the diagnostics above states 1024 MB. For the brief period of time the FreeBSD installer runs, it reports the amount of RAM as 768 MB too. http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?ProductID=2995 has integrated graphics = shared memory. You can probably change the amount of RAM allocated to the graphics card in the BIOS. Chris ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org