Rishi Chopra [EMAIL PROTECTED] writes:
A question about the 'me' keyword and ipfw: The man page for ipfw
states the following:
me matches any IP address configured on an interface in the
system. The address list is evaluated at the time the
A question about the 'me' keyword and ipfw: The man page for ipfw states
the following:
me matches any IP address configured on an interface in the
system. The address list is evaluated at the time the
packet is analysed.
If I set my oif to
, Sector V
Salt Lake City
PIN 700091
India
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Rishi Chopra
Sent: Sunday, January 11, 2004 1:42 PM
To: Mike Maltese
Cc: [EMAIL PROTECTED]
Subject: Re: (Yet Another) Home Networking Question
I was able to get my
Rishi Chopra wrote:
Perhaps someone can help me with this small part of rc.firewall:
[Ss][Ii][Mm][Pp][Ll][Ee])
# This is a prototype setup for a simple firewall. Configure this
# machine as a named server and ntp server, and point all the
machines
# on
Rishi Chopra [EMAIL PROTECTED] writes:
Perhaps someone can help me with this small part of rc.firewall:
[Ss][Ii][Mm][Pp][Ll][Ee])
# This is a prototype setup for a simple firewall. Configure this
# machine as a named server and ntp server, and point
Thanks for the generally good info; the 'me' keyword was the key piece
of info that I needed =)
Lowell Gilbert wrote:
Rishi Chopra [EMAIL PROTECTED] writes:
Perhaps someone can help me with this small part of rc.firewall:
[Ss][Ii][Mm][Pp][Ll][Ee])
# This is a
I was able to get my network up and running with the suggestions below.
To review, my setup is the following:
ISP FreeBSD Gateway Win2k Box
--rl0--rl1---
ALL DHCP 192.168.0.1 192.168.0.2
rl0 is connected to the modem by
(1) in /etc/rc.conf, I added the following
natd_enable=YES
natd_interface=rl0 ### public interface connected to cable modem
gateway_enable=YES
defaultrouter=192.168.0.1 ### LAN machines use this
ifconfig_rl0=DHCP ### Astound uses dhcp
ifconfig_rl1=inet 192.168.0.1 netmask
hostname=idfubar.dyndns.org is wrong.
This needs to be a fake domain name.
Dyndns.org is real name.
Hostname=idfubar.fbsdhome.com is better.
To enable NATD you need ipfw firewall.
These two statements are options for IPFW/Nated.
Your win box can not reach public internet because
it's
hostname=idfubar.dyndns.org is wrong.
This needs to be a fake domain name.
Dyndns.org is real name.
Hostname=idfubar.fbsdhome.com is better.
DynDNS is a dynamic DNS service. Nothing wrong here. Have a look at
http://www.dyndns.org.
___
[EMAIL
Rishi Chopra wrote:
Here's my setup:
snip
What else do I need in order to get my Win2k box surfing?
You did do a great job documenting the problem.
You have also gotten good advice thus far.
One thing you yet lack, according to the handbook,
and it's a bit of a job. The GENERIC kernel
One thing you yet lack, according to the handbook,
and it's a bit of a job. The GENERIC kernel doesn't
ship with the following options, which you are
supposed to need.
options IPFIREWALL
options IPDIVERT
Add them to /usr/src/sys/i386/conf/GENERIC,
run make buildkernel and make
12 matches
Mail list logo
