Hello!
In reply to Lars =?iso-8859-1?Q?K=F6ller?= who wrote:
Not sure here; the USB mouse on my home system (VIA KT400 chipset) works
as expected. perhaps there are two mouseds running?
No, nothing in that area. At the moment I think it has to do with the
usb code in the 5.2 kernel. The problem is I don't have an idea how to
further debug.
Do you know an USB-coding-expert, who can debug this with me?
Would be nice to have a mouse even when changing to 5.2 ;-)
I've further test the extra USB2+FW Combo card, and if I plug my mouse
there it will run in under 4.9 and 5.2.
However something in 5.2 has changed, which avoids a working usb mouse
with the onboard VIA usb port. The board is a Gigabyte GA6VXDC2 (SMP).
I've detached and reattached the mouse to the onboard usb bus, and see:
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x), VIA(0x),
rev 1.00
port 1 addr 0 should never happen!
port 2 powered
Attached are the dmesg.boot file for my 4.9 and 5.2 system and the
usbdevs -v output under 5.2 and 4.9. Have a look at the shadow device
in usbdev2-49.out after deconnecting the mouse from the PCI card usb
device and reconnect it to the onboard usb slot.
Perhaps someone can have a look at it.
Again best regards and merry christmas ;-)
Lars
--
Lars Köller
E-Mail: [EMAIL PROTECTED] ([EMAIL PROTECTED])
FreeBSD, was sonst? http://www.de.freebsd.org
Controller /dev/usb0:
addr 1: self powered, config 1, UHCI root hub(0x), VIA(0x), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb1:
addr 1: self powered, config 1, OHCI root hub(0x), NEC(0x), rev 1.00
port 1 powered
port 2 addr 2: low speed, power 100 mA, config 1, PS2/USB Browser Combo
Mouse(0x0011), Cypress Sem(0x05fe), rev 0.10
Controller /dev/usb2:
addr 1: self powered, config 1, OHCI root hub(0x), NEC(0x), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb0:
addr 1: self powered, config 1, UHCI root hub(0x), VIA(0x), rev 1.00
port 1 addr 2: low speed, power 100 mA, config 1, PS2/USB Browser Combo
Mouse(0x0011), Cypress Sem(0x05fe), rev 0.10
port 2 powered
Controller /dev/usb1:
addr 1: self powered, config 1, OHCI root hub(0x), NEC(0x), rev 1.00
port 1 powered
port 2 addr 2: low speed, power 100 mA, config 1, product 0x0011(0x0011), Chic
Technology(0x05fe), rev 0.10
Controller /dev/usb2:
addr 1: self powered, config 1, OHCI root hub(0x), NEC(0x), rev 1.00
port 1 powered
port 2 powered
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #0: Tue Oct 28 23:58:41 CET 2003
[EMAIL PROTECTED]:/opt/temp/obj/usr/src/sys/ODIE
Timecounter i8254 frequency 1193182 Hz
CPU: Intel Pentium III (800.03-MHz 686-class CPU)
Origin = GenuineIntel Id = 0x68a Stepping = 10
Features=0x383fbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real memory = 536805376 (524224K bytes)
avail memory = 518049792 (505908K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 - irq 0
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee0
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee0
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec0
Preloaded elf kernel kernel at 0xc0446000.
Preloaded elf module splash_pcx.ko at 0xc044609c.
Preloaded elf module vesa.ko at 0xc0446140.
Preloaded splash_image_data /boot/splash.pcx at 0xc04461dc.
Preloaded elf module procfs.ko at 0xc044622c.
Preloaded elf module vn.ko at 0xc04462cc.
Preloaded elf module if_tun.ko at 0xc0446368.
Preloaded elf module miibus.ko at 0xc0446408.
Preloaded elf module if_xl.ko at 0xc04464a8.
Preloaded elf module snd_sb16.ko at 0xc0446548.
Preloaded elf module snd_sbc.ko at 0xc04465e8.
Preloaded elf module snd_pcm.ko at 0xc0446688.
Preloaded elf module usb.ko at 0xc0446728.
Preloaded elf module ugen.ko at 0xc04467c4.
Preloaded elf module uhid.ko at 0xc0446860.
Preloaded elf module ukbd.ko at 0xc04468fc.
Preloaded elf module ums.ko at 0xc0446998.
Preloaded elf module umass.ko at 0xc0446a34.
Preloaded elf module uscanner.ko at 0xc0446ad4.
Preloaded elf module snp.ko at 0xc0446b74.
Preloaded elf module firewire.ko at 0xc0446c10.
Preloaded elf module sbp.ko at 0xc0446cb0.
VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc0366282 (122)
VESA: NVidia
Pentium Pro MTRR support enabled
acpi0: AMIINT on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter ACPI-fast frequency 3579545 Hz
acpi_timer0: 24-bit timer at 3.579545MHz port 0x808-0x80b on acpi0
acpi_cpu0: CPU on acpi0
acpi_cpu1: CPU on acpi0
acpi_tz0: thermal zone on acpi0
acpi_button0: Power Button on acpi0
acpi_button1: Sleep Button on acpi0
npx0: math processor on motherboard
npx0: INT 16 interface
