Hi,
[ I'm late on thread, so briefly ]
If you get desperate overheating crashes, try eg
/usr/sbin/powerd -a min -b min -n min
Thats what I'm doing on one box, till I can remove, review/ regrease.
One can also observe subsets of values from
sysctl -a | grep temp
in a while (1)
On Sunday 13 February 2011 18:52:16 Mario Lobo wrote:
Hi;
I am following 8-CURRENT AMD64. I have a Phenom II 955. Up to the 3rd week
of January, I had 8-STABLE. Idle CPU temp was 42~44 C (which is already
not excellent, i know) and full load would never go above 60 C (compiling
VBox from
On Thursday 17 February 2011 19:59:18 Chuck Swiger wrote:
Um, so you obviously aren't comparing similar circumstances.
No! Not at all.
Most computer cases are designed with front-to-back airflow
(ie, intake fans in the front, exhaust fans and the PSU in the back) and
cool more effectively
On Feb 17, 2011, at 2:53 PM, Mario Lobo wrote:
Phenom II 955 w/ stock cooler
With the side of the computer case off.
[ ...vs... ]
Phenom II 955 w/ a ZALMAN CNPS 10x PERFORMA cooler
With the side of the computer case ON.
Um, so you obviously aren't comparing similar circumstances. Most
At 7:53 PM -0300 2/17/11, Mario Lobo wrote:
I replaced the thermal grease (as advised here) with a new one but that didn't
change those figures.
I've not attempted to keep up with changes in thermal
conductivity of heat sink compounds for something like 40
years. About that time, National
On Feb 17, 2011, at 3:06 PM, Mario Lobo wrote:
Most computer cases are designed with front-to-back airflow (ie, intake fans
in the front, exhaust fans and the PSU in the back) and cool more
effectively with the case on
Well, in my case, with the BEFORE situation, if I had the side case
On Thursday 17 February 2011 21:20:57 Chuck Swiger wrote:
On Feb 17, 2011, at 3:06 PM, Mario Lobo wrote:
Most computer cases are designed with front-to-back airflow (ie, intake
fans in the front, exhaust fans and the PSU in the back) and cool more
effectively with the case on
Well,
On 13 Feb 2011 23:06, Mario Lobo ml...@digiart.art.br wrote:
Hi;
I am following 8-CURRENT AMD64. I have a Phenom II 955. Up to the 3rd week
of
January, I had 8-STABLE. Idle CPU temp was 42~44 C (which is already not
excellent, i know) and full load would never go above 60 C (compiling VBox
You need to replace the thermal grease on your processor? It goes hard and
loses effectiveness. I recommend Arctic Silver 5.
It even comes in this little push-tube applicator with a plunger ... but it
works great! Arctic Silver is probably the best their is, highly
recommended.
On Monday 14 February 2011 11:32:18 Chris Brennan wrote:
You need to replace the thermal grease on your processor? It goes hard
and loses effectiveness. I recommend Arctic Silver 5.
It even comes in this little push-tube applicator with a plunger ... but it
works great! Arctic Silver is
On 14 Feb 2011 15:51, Mario Lobo l...@bsd.com.br wrote:
On Monday 14 February 2011 11:32:18 Chris Brennan wrote:
You need to replace the thermal grease on your processor? It goes hard
and loses effectiveness. I recommend Arctic Silver 5.
It even comes in this little push-tube
-Original Message-
From: Chris Rees [mailto:utis...@gmail.com]
Sent: 14 February 2011 10:11
To: Mario Lobo
Cc: FreeBSD
Subject: Re: CPU heating!
On 13 Feb 2011 23:06, Mario Lobo ml...@digiart.art.br wrote:
Hi;
I am following 8-CURRENT AMD64. I have a Phenom II 955. Up to the 3rd
Sorry to jump in, yes I would agree about Artic Silver 5, while researching
the topic of thermal compounds I discovered that it takes approx 200 hours
of being used before AS5 will start to operate at its peak.
That's only a little over 8 days...
13 matches
Mail list logo