Re: FreeBSD-5.0 xl0 problem
On Mon, 27 Jan 2003 03:21:45 -0500, Roman wrote: >I currently installed FreeBSD-5.0 and having problem configuring xl >card. Dmesg shows that kernel picks it up: > >xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xe400-0xe47f mem >0xe000-0xe07f irq 11 at device 9.0 on pci0 >xl0: Ethernet address: 00:50:da:7d:f1:c3 > >after i do "ifconfig xl0 up" it seems like the card shuts down, the >link indicator on the hub as well as on the card itself goes blank... > >Here is ifconfig before i do anything: > >xl0: flags=8802 mtu 1500 > options=3 > ether 00:50:da:7d:f1:c3 > media: Ethernet 100baseTX (100baseTX >) > status: active >lp0: flags=8810 mtu 1500 >lo0: flags=8049 mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > inet 127.0.0.1 netmask 0xff00 > >ifconfig after "ifconfig xl0 up": > > xl0: flags=8843 mtu 1500 > options=3 > inet6 fe80::250:daff:fe7d:f1c3%xl0 prefixlen 64 scopeid 0x1 > ether 00:50:da:7d:f1:c3 > media: Ethernet 100baseTX (none) >lp0: flags=8810 mtu 1500 >lo0: flags=8049 mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > inet 127.0.0.1 netmask 0xff00 > > >With 4.7 there is no such problem. Is there is a way to load "old" >(4.7) xl driver? >Thank you. >roman. running 5.0-RELEASE without any problems, what does your rc.conf look like? xl0: flags=8843 mtu 1500 inet 192.168.1.1 netmask 0xff00 broadcast 192.168.1.255 inet6 fe80::260:8ff:febd:eb7e%xl0 prefixlen 64 scopeid 0x1 ether 00:60:08:bd:eb:7e media: Ethernet autoselect (100baseTX ) status: active xl1: flags=8843 mtu 1500 inet6 fe80::260:8ff:febd:ebbd%xl1 prefixlen 64 scopeid 0x2 inet netmask 0xff00 broadcast 255.255.255.255 ether 00:60:08:bd:eb:bd media: Ethernet autoselect (100baseTX ) status: active lp0: flags=8810 mtu 1500 lo0: flags=8049 mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet 127.0.0.1 netmask 0xff00 --- doug reynolds | the maverick | [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
Re: FreeBSD-5.0 xl0 problem
Dear/Beste Roman, Monday, January 27, 2003, 9:21:45 AM, you wrote: > I currently installed FreeBSD-5.0 and having problem configuring xl > card. Dmesg shows that kernel picks it up: > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xe400-0xe47f mem > 0xe000-0xe07f irq 11 at device 9.0 on pci0 > xl0: Ethernet address: 00:50:da:7d:f1:c3 > after i do "ifconfig xl0 up" it seems like the card shuts down, the > link indicator on the hub as well as on the card itself goes blank... > Here is ifconfig before i do anything: > xl0: flags=8802 mtu 1500 > options=3 > ether 00:50:da:7d:f1:c3 > media: Ethernet 100baseTX (100baseTX > ) > status: active > lp0: flags=8810 mtu 1500 > lo0: flags=8049 mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > inet 127.0.0.1 netmask 0xff00 > ifconfig after "ifconfig xl0 up": > xl0: flags=8843 mtu 1500 > options=3 > inet6 fe80::250:daff:fe7d:f1c3%xl0 prefixlen 64 scopeid 0x1 > ether 00:50:da:7d:f1:c3 > media: Ethernet 100baseTX (none) > lp0: flags=8810 mtu 1500 > lo0: flags=8049 mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > inet 127.0.0.1 netmask 0xff00 > With 4.7 there is no such problem. Is there is a way to load "old" > (4.7) xl driver? > Thank you. > roman. You could try to take the source files for the xl driver from 4.7 and put them with the 5.0 source than follow a normal make world (from the handbook) There located in /usr/src/sys/modules/xl and /usr/src/sys/pci (if_xl.c opt_bdg.h device_if.h bus_if.h pci_if.h). It would be nice if you checked the bugs pages and send a PR if its missing. >From Mat: > I also use 3com's with the xl driver and I have no such issues: > > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xe400-0xe47f mem 0xea00- > 0xea7f irq 12 at device 15.0 on pci0 > xl0: Ethernet address: 00:a0:24:ac:e1:b4 > xl1: <3Com 3c905-TX Fast Etherlink XL> port 0xe800-0xe83f irq 11 at device > 17.0 on pci0 > xl1: Ethernet address: 00:60:08:6d:1e:3b > > Both are configured and working first on FreeBSD5.0-RELEASE and now on 5.0- > CURRENT after I cvsup'd over the weekend. > > The only problems I have seen which I did not see with 4.x-STABLE was the > following errors: > > xl1: transmission error: 90 > xl1: tx underrun, increasing tx start threshold to 120 bytes > > This occured as I was transferring a large amount of data over a samba mount, > but I have not seen it since and the card is still working normally. I also got a xl1 card. I got the same errors when i was running 4.5 or 4.4 (i don't remember that well). All was ok when i updated later. -- Best regards/Met vriendelijke groet, Alex To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
Re: FreeBSD-5.0 xl0 problem
> I currently installed FreeBSD-5.0 and having problem configuring xl > card. Dmesg shows that kernel picks it up: *snip* I also use 3com's with the xl driver and I have no such issues: xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xe400-0xe47f mem 0xea00- 0xea7f irq 12 at device 15.0 on pci0 xl0: Ethernet address: 00:a0:24:ac:e1:b4 xl1: <3Com 3c905-TX Fast Etherlink XL> port 0xe800-0xe83f irq 11 at device 17.0 on pci0 xl1: Ethernet address: 00:60:08:6d:1e:3b Both are configured and working first on FreeBSD5.0-RELEASE and now on 5.0- CURRENT after I cvsup'd over the weekend. The only problems I have seen which I did not see with 4.x-STABLE was the following errors: xl1: transmission error: 90 xl1: tx underrun, increasing tx start threshold to 120 bytes This occured as I was transferring a large amount of data over a samba mount, but I have not seen it since and the card is still working normally. --- Matt ([EMAIL PROTECTED]) http://www.xtaz.co.uk/ --- To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message