Re: FreeBSD 9-Beta3 on X300 2 problems
2011/9/27 crsnet.pl crs...@crsnet.pl: Hi, Hello, thanks for reply. Please try to do this without wlan loaded at all (not just down, but build your wifi support as a module.) Then try without X, see whether it's related to that or not. First i make kldunload if_iwn. When i try to suspend from X, Xorg close, i see console and laptop suspend. When i resume it, i get console (any key dosent work), when i try to ALT+F9 i get black screen and beep;/ But when i try to suspen from console. I get : pci0: failed to set ACPI power state D2 \_SB_.PCI0_EXP0: AE_BAD_PARAMETER pci0: failed to set ACPI power state D2 \_SB_.PCI0_EXP1: AE_BAD_PARAMETER pci0: failed to set ACPI power state D2 \_SB_.PCI0_EXP2: AE_BAD_PARAMETER And laptop suspend, when i resume it. He hangs when i press any buttons it does nothing. And than i see on console that info : ugen0.2: Broadcom Corp ... disconnected ugen4.2: Sierra Wireless ... disconnected ubt0: at uhub0 ... disconnected then i see this presed lethers and acpi0: suspend request ignored (not ready yet) and laptops langs and beep ;/ (And you haven't told us what your hardware is.) #dmesg (+WITNESS) Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-BETA3 #3: Tue Sep 27 10:47:57 CEST 2011 cr4sh@x300:/sys/amd64/compile/GENERIC amd64 WARNING: WITNESS option enabled, expect reduced performance. CPU: Intel(R) Core(TM)2 Duo CPU L7100 @ 1.20GHz (1197.03-MHz K8-class CPU) Origin = GenuineIntel Id = 0x6fb Family = 6 Model = f Stepping = 11 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,P BE Features2=0xe3bdSSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM AMD Features=0x20100800SYSCALL,NX,LM AMD Features2=0x1LAHF TSC: P-state invariant, performance statistics real memory = 2147483648 (2048 MB) avail memory = 2019139584 (1925 MB) Event timer LAPIC quality 400 ACPI APIC Table: LENOVO TP-7T FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110527/tbfadt-556) ACPI Warning: Optional field Gpe1Block has zero address or length: 0x102C/0x0 (20110527/tbfadt-586) ioapic0: Changing APIC ID to 1 ioapic0 Version 2.0 irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: LENOVO TP-7T on motherboard CPU0: local APIC error 0x40 acpi_ec0: Embedded Controller: GPE 0x12, ECDT port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) acpi0: reservation of 0, a (3) failed acpi0: reservation of 10, 7ef0 (3) failed Timecounter ACPI-fast frequency 3579545 Hz quality 900 acpi_timer0: 24-bit timer at 3.579545MHz port 0x1008-0x100b on acpi0 cpu0: ACPI CPU on acpi0 cpu1: ACPI CPU on acpi0 acpi_lid0: Control Method Lid Switch on acpi0 acpi_button0: Sleep Button on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 vgapci0: VGA-compatible display port 0x1800-0x1807 mem 0xfa00-0xfa0f,0xe000-0xefff irq 16 at device 2.0 on pci0 agp0: Intel GM965 SVGA controller on vgapci0 agp0: aperture size is 256M, detected 7676k stolen memory vgapci1: VGA-compatible display mem 0xfa10-0xfa1f at device 2.1 on pci0 pci0: simple comms at device 3.0 (no driver attached) atapci0: Intel ATA controller port 0x1828-0x182f,0x180c-0x180f,0x1820-0x1827,0x1808-0x180b,0x1810-0x181f irq 18 at device 3.2 on pci0 ata2: ATA channel 0 on atapci0 ata3: ATA channel 1 on atapci0 pci0: simple comms, UART at device 3.3 (no driver attached) em0: Intel(R) PRO/1000 Network Connection 7.2.3 port 0x1840-0x185f mem 0xfa20-0xfa21,0xfa225000-0xfa225fff irq 20 at device 25.0 o n pci0 em0: Using an MSI interrupt acquiring duplicate lock of same type: network driver 1st dev_spec-swflag_mutex @ dev/e1000/e1000_ich8lan.c:785 2nd dev_spec-nvm_mutex @ dev/e1000/e1000_ich8lan.c:751 I think that MTX_NETWORK_LOCK is not suitable for this case as you will have 2 different locks with the same name in softc. I think that this patch should be good to go (and fixes the WITNESS warning): http://www.freebsd.org/~attilio/e1000_mutex_init.patch Thanks, Attilio -- Peace can only be achieved by understanding - A. Einstein ___ freebsd-sta...@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to freebsd-stable-unsubscr...@freebsd.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to
Re: FreeBSD 9-Beta3 on X300 2 problems
Hi, Hello, thanks for reply. Please try to do this without wlan loaded at all (not just down, but build your wifi support as a module.) Then try without X, see whether it's related to that or not. First i make kldunload if_iwn. When i try to suspend from X, Xorg close, i see console and laptop suspend. When i resume it, i get console (any key dosent work), when i try to ALT+F9 i get black screen and beep;/ But when i try to suspen from console. I get : pci0: failed to set ACPI power state D2 \_SB_.PCI0_EXP0: AE_BAD_PARAMETER pci0: failed to set ACPI power state D2 \_SB_.PCI0_EXP1: AE_BAD_PARAMETER pci0: failed to set ACPI power state D2 \_SB_.PCI0_EXP2: AE_BAD_PARAMETER And laptop suspend, when i resume it. He hangs when i press any buttons it does nothing. And than i see on console that info : ugen0.2: Broadcom Corp ... disconnected ugen4.2: Sierra Wireless ... disconnected ubt0: at uhub0 ... disconnected then i see this presed lethers and acpi0: suspend request ignored (not ready yet) and laptops langs and beep ;/ (And you haven't told us what your hardware is.) #dmesg (+WITNESS) Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-BETA3 #3: Tue Sep 27 10:47:57 CEST 2011 cr4sh@x300:/sys/amd64/compile/GENERIC amd64 WARNING: WITNESS option enabled, expect reduced performance. CPU: Intel(R) Core(TM)2 Duo CPU L7100 @ 1.20GHz (1197.03-MHz K8-class CPU) Origin = GenuineIntel Id = 0x6fb Family = 6 Model = f Stepping = 11 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,P BE Features2=0xe3bdSSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM AMD Features=0x20100800SYSCALL,NX,LM AMD Features2=0x1LAHF TSC: P-state invariant, performance statistics real memory = 2147483648 (2048 MB) avail memory = 2019139584 (1925 MB) Event timer LAPIC quality 400 ACPI APIC Table: LENOVO TP-7T FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110527/tbfadt-556) ACPI Warning: Optional field Gpe1Block has zero address or length: 0x102C/0x0 (20110527/tbfadt-586) ioapic0: Changing APIC ID to 1 ioapic0 Version 2.0 irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: LENOVO TP-7T on motherboard CPU0: local APIC error 0x40 acpi_ec0: Embedded Controller: GPE 0x12, ECDT port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) acpi0: reservation of 0, a (3) failed acpi0: reservation of 10, 7ef0 (3) failed Timecounter ACPI-fast frequency 3579545 Hz quality 900 acpi_timer0: 24-bit timer at 3.579545MHz port 0x1008-0x100b on acpi0 cpu0: ACPI CPU on acpi0 cpu1: ACPI CPU on acpi0 acpi_lid0: Control Method Lid Switch on acpi0 acpi_button0: Sleep Button on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 vgapci0: VGA-compatible display port 0x1800-0x1807 mem 0xfa00-0xfa0f,0xe000-0xefff irq 16 at device 2.0 on pci0 agp0: Intel GM965 SVGA controller on vgapci0 agp0: aperture size is 256M, detected 7676k stolen memory vgapci1: VGA-compatible display mem 0xfa10-0xfa1f at device 2.1 on pci0 pci0: simple comms at device 3.0 (no driver attached) atapci0: Intel ATA controller port 0x1828-0x182f,0x180c-0x180f,0x1820-0x1827,0x1808-0x180b,0x1810-0x181f irq 18 at device 3.2 on pci0 ata2: ATA channel 0 on atapci0 ata3: ATA channel 1 on atapci0 pci0: simple comms, UART at device 3.3 (no driver attached) em0: Intel(R) PRO/1000 Network Connection 7.2.3 port 0x1840-0x185f mem 0xfa20-0xfa21,0xfa225000-0xfa225fff irq 20 at device 25.0 o n pci0 em0: Using an MSI interrupt acquiring duplicate lock of same type: network driver 1st dev_spec-swflag_mutex @ dev/e1000/e1000_ich8lan.c:785 2nd dev_spec-nvm_mutex @ dev/e1000/e1000_ich8lan.c:751 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a kdb_backtrace() at kdb_backtrace+0x37 _witness_debugger() at _witness_debugger+0x2e witness_checkorder() at witness_checkorder+0x8de _mtx_lock_flags() at _mtx_lock_flags+0x79 e1000_acquire_nvm_ich8lan() at e1000_acquire_nvm_ich8lan+0x1e e1000_read_nvm_ich8lan() at e1000_read_nvm_ich8lan+0x76 e1000_post_phy_reset_ich8lan() at e1000_post_phy_reset_ich8lan+0x1b1 e1000_reset_hw_ich8lan() at e1000_reset_hw_ich8lan+0x4c1 em_attach() at em_attach+0x11bd device_attach() at device_attach+0x69 bus_generic_attach() at bus_generic_attach+0x1a acpi_pci_attach() at acpi_pci_attach+0x14f
Re: FreeBSD 9-Beta3 on X300 2 problems
Hi, Please try to do this without wlan loaded at all (not just down, but build your wifi support as a module.) Then try without X, see whether it's related to that or not. (And you haven't told us what your hardware is.) Adrian ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
