Re: Help compiling ffmpeg from source
On 02/29/12 23:48, Andy Wodfer wrote: I'm on FreeBSD 8.2 STABLE (AMD64). I need to install the latest ffmpeg 0.10, but it fails when compiling. I must admit I very rarely do it this way. Normally all software is installed from ports, but I couldn't find this version of ffmpeg there. Heres what I do: ./configure gmake and the problem looks like this: [snip] /var/tmp//ccKzWhb0.s:26921: Error: `ff_h264_norm_shift(%r10d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26923: Error: `ff_h264_mlps_state+128(%edi)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26931: Error: `-1(%r9d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26936: Error: `ff_h264_norm_shift(%ecx)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27045: Error: `ff_h264_lps_range(%r9d,%r12d,2)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27055: Error: `ff_h264_norm_shift(%r12d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27057: Error: `ff_h264_mlps_state+128(%r9d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27065: Error: `-1(%r11d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27070: Error: `ff_h264_norm_shift(%ecx)' is not a valid 64 bit base/index expression gmake: *** [libavcodec/h264_cabac.o] Error 1 Thats right, I remember this one- really simple but will get you every time! You need a newer gcc version (probably 4.6 will get you out of trouble if I remember correctly). The port already sets this, it will only bite when you're working solo. HTH ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Help compiling ffmpeg from source
On Wed, Feb 29, 2012 at 2:50 PM, Da Rock freebsd-questi...@herveybayaustralia.com.au wrote: On 02/29/12 23:48, Andy Wodfer wrote: I'm on FreeBSD 8.2 STABLE (AMD64). I need to install the latest ffmpeg 0.10, but it fails when compiling. I must admit I very rarely do it this way. Normally all software is installed from ports, but I couldn't find this version of ffmpeg there. Heres what I do: ./configure gmake and the problem looks like this: [snip] /var/tmp//ccKzWhb0.s:26921: Error: `ff_h264_norm_shift(%r10d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26923: Error: `ff_h264_mlps_state+128(%edi)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26931: Error: `-1(%r9d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26936: Error: `ff_h264_norm_shift(%ecx)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27045: Error: `ff_h264_lps_range(%r9d,%r12d,**2)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27055: Error: `ff_h264_norm_shift(%r12d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27057: Error: `ff_h264_mlps_state+128(%r9d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27065: Error: `-1(%r11d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27070: Error: `ff_h264_norm_shift(%ecx)' is not a valid 64 bit base/index expression gmake: *** [libavcodec/h264_cabac.o] Error 1 Thats right, I remember this one- really simple but will get you every time! You need a newer gcc version (probably 4.6 will get you out of trouble if I remember correctly). The port already sets this, it will only bite when you're working solo. Ok - thanks! I'm currently doing this: http://www.freebsd.org/doc/en/articles/custom-gcc/article.html I will report back on how it goes. :-) Cheers, Andy ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Help compiling ffmpeg from source
On Wed, Feb 29, 2012 at 3:09 PM, Andy Wodfer wod...@gmail.com wrote: On Wed, Feb 29, 2012 at 2:50 PM, Da Rock freebsd-questi...@herveybayaustralia.com.au wrote: On 02/29/12 23:48, Andy Wodfer wrote: I'm on FreeBSD 8.2 STABLE (AMD64). I need to install the latest ffmpeg 0.10, but it fails when compiling. I must admit I very rarely do it this way. Normally all software is installed from ports, but I couldn't find this version of ffmpeg there. Heres what I do: ./configure gmake and the problem looks like this: [snip] /var/tmp//ccKzWhb0.s:26921: Error: `ff_h264_norm_shift(%r10d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26923: Error: `ff_h264_mlps_state+128(%edi)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26931: Error: `-1(%r9d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26936: Error: `ff_h264_norm_shift(%ecx)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27045: Error: `ff_h264_lps_range(%r9d,%r12d,**2)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27055: Error: `ff_h264_norm_shift(%r12d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27057: Error: `ff_h264_mlps_state+128(%r9d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27065: Error: `-1(%r11d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27070: Error: `ff_h264_norm_shift(%ecx)' is not a valid 64 bit base/index expression gmake: *** [libavcodec/h264_cabac.o] Error 1 Thats right, I remember this one- really simple but will get you every time! You need a newer gcc version (probably 4.6 will get you out of trouble if I remember correctly). The port already sets this, it will only bite when you're working solo. Ok - thanks! I'm currently doing this: http://www.freebsd.org/doc/en/articles/custom-gcc/article.html I will report back on how it goes. :-) Cheers, Andy So, I updated gmake to 3.82 from ports and installed gcc47 from ports. I updated /etc/make.conf as described here: http://www.freebsd.org/doc/en/articles/custom-gcc/article.html However, I don't have a libmap file so I skipped this one and the other ones below in the article. Here's some outputs: # gmake -v GNU Make 3.82 Built for amd64-portbld-freebsd8.2 Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. # gcc -v Using built-in specs. Target: amd64-undermydesk-freebsd Configured with: FreeBSD/amd64 system compiler Thread model: posix gcc version 4.2.2 20070831 prerelease [FreeBSD] How do I tell the system to use gcc47 instead of 4.2.2 (if that's what causes the problems)? Compiling ffmpeg from source still failes on the same line as in my orginal post. Thanks a lot for any pointers that will help me resolve this. :-) All the best, Andy ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Help compiling ffmpeg from source
On Feb 29, 2012 12:10 PM, Andy Wodfer wod...@gmail.com wrote: On Wed, Feb 29, 2012 at 3:09 PM, Andy Wodfer wod...@gmail.com wrote: On Wed, Feb 29, 2012 at 2:50 PM, Da Rock freebsd-questi...@herveybayaustralia.com.au wrote: On 02/29/12 23:48, Andy Wodfer wrote: I'm on FreeBSD 8.2 STABLE (AMD64). I need to install the latest ffmpeg 0.10, but it fails when compiling. I must admit I very rarely do it this way. Normally all software is installed from ports, but I couldn't find this version of ffmpeg there. Heres what I do: ./configure gmake and the problem looks like this: [snip] /var/tmp//ccKzWhb0.s:26921: Error: `ff_h264_norm_shift(%r10d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26923: Error: `ff_h264_mlps_state+128(%edi)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26931: Error: `-1(%r9d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26936: Error: `ff_h264_norm_shift(%ecx)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27045: Error: `ff_h264_lps_range(%r9d,%r12d,**2)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27055: Error: `ff_h264_norm_shift(%r12d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27057: Error: `ff_h264_mlps_state+128(%r9d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27065: Error: `-1(%r11d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27070: Error: `ff_h264_norm_shift(%ecx)' is not a valid 64 bit base/index expression gmake: *** [libavcodec/h264_cabac.o] Error 1 Thats right, I remember this one- really simple but will get you every time! You need a newer gcc version (probably 4.6 will get you out of trouble if I remember correctly). The port already sets this, it will only bite when you're working solo. Ok - thanks! I'm currently doing this: http://www.freebsd.org/doc/en/articles/custom-gcc/article.html I will report back on how it goes. :-) Cheers, Andy So, I updated gmake to 3.82 from ports and installed gcc47 from ports. I updated /etc/make.conf as described here: http://www.freebsd.org/doc/en/articles/custom-gcc/article.html However, I don't have a libmap file so I skipped this one and the other ones below in the article. Here's some outputs: # gmake -v GNU Make 3.82 Built for amd64-portbld-freebsd8.2 Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. # gcc -v Using built-in specs. Target: amd64-undermydesk-freebsd Configured with: FreeBSD/amd64 system compiler Thread model: posix gcc version 4.2.2 20070831 prerelease [FreeBSD] How do I tell the system to use gcc47 instead of 4.2.2 (if that's what causes the problems)? Compiling ffmpeg from source still failes on the same line as in my orginal post. Thanks a lot for any pointers that will help me resolve this. :-) All the best, Andy ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org is there a gcc47 or maybe a typo? should be # export CC=gcc46 or # setenv CC gcc46 if building from source -- Waitman Gobble San Jose California USA ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Help compiling ffmpeg from source
On Wed, Feb 29, 2012 at 12:20 PM, Waitman Gobble gobble...@gmail.comwrote: On Feb 29, 2012 12:10 PM, Andy Wodfer wod...@gmail.com wrote: On Wed, Feb 29, 2012 at 3:09 PM, Andy Wodfer wod...@gmail.com wrote: On Wed, Feb 29, 2012 at 2:50 PM, Da Rock freebsd-questi...@herveybayaustralia.com.au wrote: On 02/29/12 23:48, Andy Wodfer wrote: I'm on FreeBSD 8.2 STABLE (AMD64). I need to install the latest ffmpeg 0.10, but it fails when compiling. I must admit I very rarely do it this way. Normally all software is installed from ports, but I couldn't find this version of ffmpeg there. Heres what I do: ./configure gmake and the problem looks like this: [snip] /var/tmp//ccKzWhb0.s:26921: Error: `ff_h264_norm_shift(%r10d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26923: Error: `ff_h264_mlps_state+128(%edi)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26931: Error: `-1(%r9d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26936: Error: `ff_h264_norm_shift(%ecx)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27045: Error: `ff_h264_lps_range(%r9d,%r12d,**2)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27055: Error: `ff_h264_norm_shift(%r12d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27057: Error: `ff_h264_mlps_state+128(%r9d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27065: Error: `-1(%r11d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27070: Error: `ff_h264_norm_shift(%ecx)' is not a valid 64 bit base/index expression gmake: *** [libavcodec/h264_cabac.o] Error 1 Thats right, I remember this one- really simple but will get you every time! You need a newer gcc version (probably 4.6 will get you out of trouble if I remember correctly). The port already sets this, it will only bite when you're working solo. Ok - thanks! I'm currently doing this: http://www.freebsd.org/doc/en/articles/custom-gcc/article.html I will report back on how it goes. :-) Cheers, Andy So, I updated gmake to 3.82 from ports and installed gcc47 from ports. I updated /etc/make.conf as described here: http://www.freebsd.org/doc/en/articles/custom-gcc/article.html However, I don't have a libmap file so I skipped this one and the other ones below in the article. Here's some outputs: # gmake -v GNU Make 3.82 Built for amd64-portbld-freebsd8.2 Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. # gcc -v Using built-in specs. Target: amd64-undermydesk-freebsd Configured with: FreeBSD/amd64 system compiler Thread model: posix gcc version 4.2.2 20070831 prerelease [FreeBSD] How do I tell the system to use gcc47 instead of 4.2.2 (if that's what causes the problems)? Compiling ffmpeg from source still failes on the same line as in my orginal post. Thanks a lot for any pointers that will help me resolve this. :-) All the best, Andy ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org is there a gcc47 or maybe a typo? should be # export CC=gcc46 or # setenv CC gcc46 if building from source -- Waitman Gobble San Jose California USA OOps my bad, that's the gcc development version... stable is 4.6.2.. or gcc46 ... didn't notice there was a port :) Waitman ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Help compiling ffmpeg from source
On Wed, Feb 29, 2012 at 9:20 PM, Waitman Gobble gobble...@gmail.com wrote: On Feb 29, 2012 12:10 PM, Andy Wodfer wod...@gmail.com wrote: On Wed, Feb 29, 2012 at 3:09 PM, Andy Wodfer wod...@gmail.com wrote: On Wed, Feb 29, 2012 at 2:50 PM, Da Rock freebsd-questi...@herveybayaustralia.com.au wrote: On 02/29/12 23:48, Andy Wodfer wrote: I'm on FreeBSD 8.2 STABLE (AMD64). I need to install the latest ffmpeg 0.10, but it fails when compiling. I must admit I very rarely do it this way. Normally all software is installed from ports, but I couldn't find this version of ffmpeg there. Heres what I do: ./configure gmake and the problem looks like this: [snip] /var/tmp//ccKzWhb0.s:26921: Error: `ff_h264_norm_shift(%r10d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26923: Error: `ff_h264_mlps_state+128(%edi)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26931: Error: `-1(%r9d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26936: Error: `ff_h264_norm_shift(%ecx)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27045: Error: `ff_h264_lps_range(%r9d,%r12d,**2)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27055: Error: `ff_h264_norm_shift(%r12d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27057: Error: `ff_h264_mlps_state+128(%r9d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27065: Error: `-1(%r11d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27070: Error: `ff_h264_norm_shift(%ecx)' is not a valid 64 bit base/index expression gmake: *** [libavcodec/h264_cabac.o] Error 1 Thats right, I remember this one- really simple but will get you every time! You need a newer gcc version (probably 4.6 will get you out of trouble if I remember correctly). The port already sets this, it will only bite when you're working solo. Ok - thanks! I'm currently doing this: http://www.freebsd.org/doc/en/articles/custom-gcc/article.html I will report back on how it goes. :-) Cheers, Andy So, I updated gmake to 3.82 from ports and installed gcc47 from ports. I updated /etc/make.conf as described here: http://www.freebsd.org/doc/en/articles/custom-gcc/article.html However, I don't have a libmap file so I skipped this one and the other ones below in the article. Here's some outputs: # gmake -v GNU Make 3.82 Built for amd64-portbld-freebsd8.2 Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. # gcc -v Using built-in specs. Target: amd64-undermydesk-freebsd Configured with: FreeBSD/amd64 system compiler Thread model: posix gcc version 4.2.2 20070831 prerelease [FreeBSD] How do I tell the system to use gcc47 instead of 4.2.2 (if that's what causes the problems)? Compiling ffmpeg from source still failes on the same line as in my orginal post. Thanks a lot for any pointers that will help me resolve this. :-) All the best, Andy ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org is there a gcc47 or maybe a typo? should be # export CC=gcc46 or # setenv CC gcc46 if building from source -- Waitman Gobble San Jose California USA Yes, gcc47 was out a few days ago. So, I'm making some progress. I now export CC=gcc47 and by adding this ./configure --extra-cflags=-DBROKEN_RELOCATIONS (what does this mean/do???) I'm able to get past the h264 compile fail. However, I now stop at vp5 with the following message: CC libavcodec/vp5.o /var/tmp//ccmvakth.s: Assembler messages: /var/tmp//ccmvakth.s:323: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:436: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:548: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:669: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:920: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:1136: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:1422: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:1531: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:1826: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:1923: Error: `(%esi,%edx)' is not
Re: Help compiling ffmpeg from source
On Wed, Feb 29, 2012 at 12:37 PM, Andy Wodfer wod...@gmail.com wrote: On Wed, Feb 29, 2012 at 9:20 PM, Waitman Gobble gobble...@gmail.com wrote: On Feb 29, 2012 12:10 PM, Andy Wodfer wod...@gmail.com wrote: On Wed, Feb 29, 2012 at 3:09 PM, Andy Wodfer wod...@gmail.com wrote: On Wed, Feb 29, 2012 at 2:50 PM, Da Rock freebsd-questi...@herveybayaustralia.com.au wrote: On 02/29/12 23:48, Andy Wodfer wrote: I'm on FreeBSD 8.2 STABLE (AMD64). I need to install the latest ffmpeg 0.10, but it fails when compiling. I must admit I very rarely do it this way. Normally all software is installed from ports, but I couldn't find this version of ffmpeg there. Heres what I do: ./configure gmake and the problem looks like this: [snip] /var/tmp//ccKzWhb0.s:26921: Error: `ff_h264_norm_shift(%r10d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26923: Error: `ff_h264_mlps_state+128(%edi)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26931: Error: `-1(%r9d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26936: Error: `ff_h264_norm_shift(%ecx)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27045: Error: `ff_h264_lps_range(%r9d,%r12d,**2)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27055: Error: `ff_h264_norm_shift(%r12d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27057: Error: `ff_h264_mlps_state+128(%r9d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27065: Error: `-1(%r11d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27070: Error: `ff_h264_norm_shift(%ecx)' is not a valid 64 bit base/index expression gmake: *** [libavcodec/h264_cabac.o] Error 1 Thats right, I remember this one- really simple but will get you every time! You need a newer gcc version (probably 4.6 will get you out of trouble if I remember correctly). The port already sets this, it will only bite when you're working solo. Ok - thanks! I'm currently doing this: http://www.freebsd.org/doc/en/articles/custom-gcc/article.html I will report back on how it goes. :-) Cheers, Andy So, I updated gmake to 3.82 from ports and installed gcc47 from ports. I updated /etc/make.conf as described here: http://www.freebsd.org/doc/en/articles/custom-gcc/article.html However, I don't have a libmap file so I skipped this one and the other ones below in the article. Here's some outputs: # gmake -v GNU Make 3.82 Built for amd64-portbld-freebsd8.2 Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. # gcc -v Using built-in specs. Target: amd64-undermydesk-freebsd Configured with: FreeBSD/amd64 system compiler Thread model: posix gcc version 4.2.2 20070831 prerelease [FreeBSD] How do I tell the system to use gcc47 instead of 4.2.2 (if that's what causes the problems)? Compiling ffmpeg from source still failes on the same line as in my orginal post. Thanks a lot for any pointers that will help me resolve this. :-) All the best, Andy ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org is there a gcc47 or maybe a typo? should be # export CC=gcc46 or # setenv CC gcc46 if building from source -- Waitman Gobble San Jose California USA Yes, gcc47 was out a few days ago. So, I'm making some progress. I now export CC=gcc47 and by adding this ./configure --extra-cflags=-DBROKEN_RELOCATIONS (what does this mean/do???) I'm able to get past the h264 compile fail. However, I now stop at vp5 with the following message: CC libavcodec/vp5.o /var/tmp//ccmvakth.s: Assembler messages: /var/tmp//ccmvakth.s:323: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:436: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:548: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:669: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:920: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:1136: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:1422: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression
Re: Help compiling ffmpeg from source
On Wed, Feb 29, 2012 at 9:46 PM, Waitman Gobble gobble...@gmail.com wrote: On Wed, Feb 29, 2012 at 12:37 PM, Andy Wodfer wod...@gmail.com wrote: On Wed, Feb 29, 2012 at 9:20 PM, Waitman Gobble gobble...@gmail.com wrote: On Feb 29, 2012 12:10 PM, Andy Wodfer wod...@gmail.com wrote: On Wed, Feb 29, 2012 at 3:09 PM, Andy Wodfer wod...@gmail.com wrote: On Wed, Feb 29, 2012 at 2:50 PM, Da Rock freebsd-questi...@herveybayaustralia.com.au wrote: On 02/29/12 23:48, Andy Wodfer wrote: I'm on FreeBSD 8.2 STABLE (AMD64). I need to install the latest ffmpeg 0.10, but it fails when compiling. I must admit I very rarely do it this way. Normally all software is installed from ports, but I couldn't find this version of ffmpeg there. Heres what I do: ./configure gmake and the problem looks like this: [snip] /var/tmp//ccKzWhb0.s:26921: Error: `ff_h264_norm_shift(%r10d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26923: Error: `ff_h264_mlps_state+128(%edi)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26931: Error: `-1(%r9d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26936: Error: `ff_h264_norm_shift(%ecx)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27045: Error: `ff_h264_lps_range(%r9d,%r12d,**2)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27055: Error: `ff_h264_norm_shift(%r12d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27057: Error: `ff_h264_mlps_state+128(%r9d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27065: Error: `-1(%r11d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27070: Error: `ff_h264_norm_shift(%ecx)' is not a valid 64 bit base/index expression gmake: *** [libavcodec/h264_cabac.o] Error 1 Thats right, I remember this one- really simple but will get you every time! You need a newer gcc version (probably 4.6 will get you out of trouble if I remember correctly). The port already sets this, it will only bite when you're working solo. Ok - thanks! I'm currently doing this: http://www.freebsd.org/doc/en/articles/custom-gcc/article.html I will report back on how it goes. :-) Cheers, Andy So, I updated gmake to 3.82 from ports and installed gcc47 from ports. I updated /etc/make.conf as described here: http://www.freebsd.org/doc/en/articles/custom-gcc/article.html However, I don't have a libmap file so I skipped this one and the other ones below in the article. Here's some outputs: # gmake -v GNU Make 3.82 Built for amd64-portbld-freebsd8.2 Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. # gcc -v Using built-in specs. Target: amd64-undermydesk-freebsd Configured with: FreeBSD/amd64 system compiler Thread model: posix gcc version 4.2.2 20070831 prerelease [FreeBSD] How do I tell the system to use gcc47 instead of 4.2.2 (if that's what causes the problems)? Compiling ffmpeg from source still failes on the same line as in my orginal post. Thanks a lot for any pointers that will help me resolve this. :-) All the best, Andy ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org is there a gcc47 or maybe a typo? should be # export CC=gcc46 or # setenv CC gcc46 if building from source -- Waitman Gobble San Jose California USA Yes, gcc47 was out a few days ago. So, I'm making some progress. I now export CC=gcc47 and by adding this ./configure --extra-cflags=-DBROKEN_RELOCATIONS (what does this mean/do???) I'm able to get past the h264 compile fail. However, I now stop at vp5 with the following message: CC libavcodec/vp5.o /var/tmp//ccmvakth.s: Assembler messages: /var/tmp//ccmvakth.s:323: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:436: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:548: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:669: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:920: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:1136: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression
Re: Help compiling ffmpeg from source
On Wed, Feb 29, 2012 at 1:03 PM, Andy Wodfer wod...@gmail.com wrote: On Wed, Feb 29, 2012 at 9:46 PM, Waitman Gobble gobble...@gmail.comwrote: On Wed, Feb 29, 2012 at 12:37 PM, Andy Wodfer wod...@gmail.com wrote: On Wed, Feb 29, 2012 at 9:20 PM, Waitman Gobble gobble...@gmail.com wrote: On Feb 29, 2012 12:10 PM, Andy Wodfer wod...@gmail.com wrote: On Wed, Feb 29, 2012 at 3:09 PM, Andy Wodfer wod...@gmail.com wrote: On Wed, Feb 29, 2012 at 2:50 PM, Da Rock freebsd-questi...@herveybayaustralia.com.au wrote: On 02/29/12 23:48, Andy Wodfer wrote: I'm on FreeBSD 8.2 STABLE (AMD64). I need to install the latest ffmpeg 0.10, but it fails when compiling. I must admit I very rarely do it this way. Normally all software is installed from ports, but I couldn't find this version of ffmpeg there. Heres what I do: ./configure gmake and the problem looks like this: [snip] /var/tmp//ccKzWhb0.s:26921: Error: `ff_h264_norm_shift(%r10d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26923: Error: `ff_h264_mlps_state+128(%edi)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26931: Error: `-1(%r9d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:26936: Error: `ff_h264_norm_shift(%ecx)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27045: Error: `ff_h264_lps_range(%r9d,%r12d,**2)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27055: Error: `ff_h264_norm_shift(%r12d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27057: Error: `ff_h264_mlps_state+128(%r9d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27065: Error: `-1(%r11d)' is not a valid 64 bit base/index expression /var/tmp//ccKzWhb0.s:27070: Error: `ff_h264_norm_shift(%ecx)' is not a valid 64 bit base/index expression gmake: *** [libavcodec/h264_cabac.o] Error 1 Thats right, I remember this one- really simple but will get you every time! You need a newer gcc version (probably 4.6 will get you out of trouble if I remember correctly). The port already sets this, it will only bite when you're working solo. Ok - thanks! I'm currently doing this: http://www.freebsd.org/doc/en/articles/custom-gcc/article.html I will report back on how it goes. :-) Cheers, Andy So, I updated gmake to 3.82 from ports and installed gcc47 from ports. I updated /etc/make.conf as described here: http://www.freebsd.org/doc/en/articles/custom-gcc/article.html However, I don't have a libmap file so I skipped this one and the other ones below in the article. Here's some outputs: # gmake -v GNU Make 3.82 Built for amd64-portbld-freebsd8.2 Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. # gcc -v Using built-in specs. Target: amd64-undermydesk-freebsd Configured with: FreeBSD/amd64 system compiler Thread model: posix gcc version 4.2.2 20070831 prerelease [FreeBSD] How do I tell the system to use gcc47 instead of 4.2.2 (if that's what causes the problems)? Compiling ffmpeg from source still failes on the same line as in my orginal post. Thanks a lot for any pointers that will help me resolve this. :-) All the best, Andy ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org is there a gcc47 or maybe a typo? should be # export CC=gcc46 or # setenv CC gcc46 if building from source -- Waitman Gobble San Jose California USA Yes, gcc47 was out a few days ago. So, I'm making some progress. I now export CC=gcc47 and by adding this ./configure --extra-cflags=-DBROKEN_RELOCATIONS (what does this mean/do???) I'm able to get past the h264 compile fail. However, I now stop at vp5 with the following message: CC libavcodec/vp5.o /var/tmp//ccmvakth.s: Assembler messages: /var/tmp//ccmvakth.s:323: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:436: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:548: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:669: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:920: Error: `(%r8d,%eax)' is not a valid 64 bit base/index expression /var/tmp//ccmvakth.s:1136: Error:
