Re: IBM server SAS controller support?
I've now added the mfi_load option to loader.conf At boot this gives me the following message: module_register: module mfi/mfid already exists! Module mfi/mfid failed to register: 17 This leads me to believe that the driver is already compiled into the kernel, as stated by SpamTitan. The installation procedure still can't find any disks! Are there any other things I could try? Obviously it can be done, but I'm apparently not capable of doing it. Any suggestions, anyone? Regards Christian T. Bakken Den 10. sep. 2010 kl. 15.51 skrev Samuel Martín Moro: two solutions: - compiling the kernel with the driver (device pci and device mfi in the configuration file) - mfi_load=YES in your loader.conf Samuel Martín Moro {EPITECH.} tek4 CamTrace S.A.S (+033) 1 41 38 37 60 1 Allée de la Venelle 92150 Suresnes FRANCE Nobody wants to say how this works. Maybe nobody knows ... Xorg.conf(5) On Fri, Sep 10, 2010 at 3:27 PM, Christian Thørn Bakken cbak...@roros.netwrote: I understand that you, Ivan, managed to install FreeBSD on an IBM Series x 3650 M3 server with the LSI M1015 SAS/SATA RAID controller. Ivan, did you tweak something to install, or did it work out of the box for you? Which FreeBSD version did you install? My main objective is to install the appliance distro SpanTitan 5.04 from www.spamtitan.com. It's based on FreeBSD 7.3 and the manufacturer confirms that the mfi(4) driver is compiled into the kernel. I've also tried with another (vanilla) version of FreeBSD (8.1), but with no luck. It just says there's no disk drives found. Regards Christian T. Bakken___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: IBM server SAS controller support?
two solutions: - compiling the kernel with the driver (device pci and device mfi in the configuration file) - mfi_load=YES in your loader.conf Samuel Martín Moro {EPITECH.} tek4 CamTrace S.A.S (+033) 1 41 38 37 60 1 Allée de la Venelle 92150 Suresnes FRANCE Nobody wants to say how this works. Maybe nobody knows ... Xorg.conf(5) On Fri, Sep 10, 2010 at 3:27 PM, Christian Thørn Bakken cbak...@roros.netwrote: I understand that you, Ivan, managed to install FreeBSD on an IBM Series x 3650 M3 server with the LSI M1015 SAS/SATA RAID controller. Ivan, did you tweak something to install, or did it work out of the box for you? Which FreeBSD version did you install? My main objective is to install the appliance distro SpanTitan 5.04 from www.spamtitan.com. It's based on FreeBSD 7.3 and the manufacturer confirms that the mfi(4) driver is compiled into the kernel. I've also tried with another (vanilla) version of FreeBSD (8.1), but with no luck. It just says there's no disk drives found. Regards Christian T. Bakken___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: IBM server SAS controller support?
Sorry about the blank post... As I wrote in my former post, SpamTitan claims that the driver is already compiled into the kernel. Even if that is correct, it wouldn't hurt to try the loader.conf approach, would it? Can I just edit the loader.conf file in a loop mounted .iso, and then just burn the .iso to a bootable CD? Regards Christian T Bakken Den 10. sep. 2010 kl. 15:51 skrev Samuel Martín Moro faus...@gmail.com: two solutions: - compiling the kernel with the driver (device pci and device mfi in the configuration file) - mfi_load=YES in your loader.conf Samuel Martín Moro {EPITECH.} tek4 CamTrace S.A.S (+033) 1 41 38 37 60 1 Allée de la Venelle 92150 Suresnes FRANCE Nobody wants to say how this works. Maybe nobody knows ... Xorg.conf(5) On Fri, Sep 10, 2010 at 3:27 PM, Christian Thørn Bakken cbak...@roros.netwrote: I understand that you, Ivan, managed to install FreeBSD on an IBM Series x 3650 M3 server with the LSI M1015 SAS/SATA RAID controller. Ivan, did you tweak something to install, or did it work out of the box for you? Which FreeBSD version did you install? My main objective is to install the appliance distro SpanTitan 5.04 from www.spamtitan.com. It's based on FreeBSD 7.3 and the manufacturer confirms that the mfi(4) driver is compiled into the kernel. I've also tried with another (vanilla) version of FreeBSD (8.1), but with no luck. It just says there's no disk drives found. Regards Christian T. Bakken___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: IBM server SAS controller support?
Mvh Christian Thørn Bakken Infonett Røros as Mob. 40 40 83 38 Tel. 72 41 48 17 www.rev.no | www.roros.net Den 10. sep. 2010 kl. 15:51 skrev Samuel Martín Moro faus...@gmail.com: two solutions: - compiling the kernel with the driver (device pci and device mfi in the configuration file) - mfi_load=YES in your loader.conf Samuel Martín Moro {EPITECH.} tek4 CamTrace S.A.S (+033) 1 41 38 37 60 1 Allée de la Venelle 92150 Suresnes FRANCE Nobody wants to say how this works. Maybe nobody knows ... Xorg.conf(5) On Fri, Sep 10, 2010 at 3:27 PM, Christian Thørn Bakken cbak...@roros.netwrote: I understand that you, Ivan, managed to install FreeBSD on an IBM Series x 3650 M3 server with the LSI M1015 SAS/SATA RAID controller. Ivan, did you tweak something to install, or did it work out of the box for you? Which FreeBSD version did you install? My main objective is to install the appliance distro SpanTitan 5.04 from www.spamtitan.com. It's based on FreeBSD 7.3 and the manufacturer confirms that the mfi(4) driver is compiled into the kernel. I've also tried with another (vanilla) version of FreeBSD (8.1), but with no luck. It just says there's no disk drives found. Regards Christian T. Bakken___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: IBM server SAS controller support?
On 08/27/10 16:23, Baldur Gislason wrote: I have an IBM 7945 server with an LSI Logic ServeRAID (MegaRAID) M1015 controller and I'm wondering if there's any way to install FreeBSD on this box? So you have tried and failed? There are lists of devices here: http://man.freebsd.org/mfi http://man.freebsd.org/amr but they are incomplete. FWIW, I've successfuly used IBM x3650 M3 with the controller which identifies itself as: mfi0: LSI MegaSAS Gen2 port 0x1000-0x10ff mem 0x9f94-0x9f943fff,0x9f90-0x9f93 irq 16 at device 0.0 on pci1 mfi0: Megaraid SAS driver Ver 3.00 mfi0: 498 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0079/1000/03b2/1014) mfi0: 499 (boot + 3s/0x0020/info) - Firmware version 2.0.03-0689 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: IBM Server
On Tuesday 26 June 2007 11:18:09 Oakley, Will wrote: Hi FYI - I have just installed FreeBSD 6 onto an IBM x3550 configured with RAID 1. - William Oakley ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] one sec... forwarding this to my mom!! (hehe, just kidding) uname -a? dmesg? i know there is also a place on freebsd.org to submit known working configurations. -- Jonathan Horne http://dfwlpiki.dfwlp.org [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: IBM Server
I got it!. The SATA RAID controller is Adaptec AIC-9580W... Is there full support on FreeBSD for this? El mar, 05-12-2006 a las 19:04 -0500, Marcelo Celleri escribió: Hi everyone, I need to buy a cheap server, I was looking for something good and I found the IBM X3400 but I would like to know if FreeBSD has the drivers for the SATA RAID controller that comes embedded on the system. At this time I haven't found the specifications for the controller, but I think it's an Adaptec. Thanks a lot, Marcelo Celleri ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]