On 4/1/07, Warren Block [EMAIL PROTECTED] wrote:
On Sun, 1 Apr 2007, Ivan Zenzerovię wrote:
zenzo|line|HP6L|lp|Hewlett z Packard Laser Jet6L:\
:sh:sd=/var/spool/zenzo:\
:lp=/dev/lpt0:\
:if=/usr/local/libexec/if-simple:\
# :if=/usr/local/libexec/hpif:
still
On Sun, 1 Apr 2007, Ivan Zenzerović wrote:
On 4/1/07, Warren Block [EMAIL PROTECTED] wrote:
lp:\
:lp=/dev/lpt0:\
:sh:\
:sd=/var/spool/zenzo:\
:if=/usr/local/libexec/if-simple:
This requires that /usr/local/libexec/if-simple is in place and
executable, too.
O/H Warren Block έγραψε:
The LJ6L can't directly understand a PDF, and would print binary
garbage. So it's doing what it can.
If the test print worked, the next step would be to install ghostscript
(/usr/ports/print/ghostscript-gpl) and update the printcap file to use
the ifhp filter as
On Sun, 1 Apr 2007, Ivan Zenzeroviæ wrote:
I have now another problem. I tryed to set up my printer (HP LaserJet 6L)
following the instructions in the handbook. Ok, the printer responds, but
when i try to print it only takes paper and prints eventually a line of some
strange signs.
What are
Thanks, I'll try to configure it now.
/etc/printcap/
# @(#)printcap5.3 (Berkeley) 6/30/90
# $FreeBSD: src/etc/printcap,v 1.14 2004/06/06 11:46:27 schweikh Exp $
#
# This enables a simple local raw printer, hooked up to the first
# parallel port. No kind of filtering is done, so
Hi,
still the same, I put the device ljet5, because there is no ljet6. I just
don't get it, why is doing that!
Ivan
On 4/1/07, Ivan Zenzerović [EMAIL PROTECTED] wrote:
Thanks, I'll try to configure it now.
/etc/printcap/
# @(#)printcap5.3 (Berkeley) 6/30/90
# $FreeBSD:
On Sun, 1 Apr 2007, Ivan Zenzerovię wrote:
zenzo|line|HP6L|lp|Hewlett z Packard Laser Jet6L:\
:sh:sd=/var/spool/zenzo:\
:lp=/dev/lpt0:\
:if=/usr/local/libexec/if-simple:\
# :if=/usr/local/libexec/hpif:
still the same, I put the device ljet5, because there is no
