Re: RAID 1 in HP NetServer LC 2000
Muhammad Reza wrote: Greg 'groggy' Lehey wrote: On Monday, 11 October 2004 at 5:55:24 +0700, Muhammad Reza wrote: Ok.. vinum then.. but i have error when applied this vinum.conf drive drive1 device /dev/da0s1e drive drive2 device /dev/da1s1e volume usr setupstate plex org concat sd length 13887091s drive drive1 plex org concat sd length 13887091s drive drive2 volume var setupstate plex org concat sd length 0 drive drive1 plex org concat sd length 0 drive drive2 mail# vinum vinum -> create -f /etc/vinum.conf 2: drive drive2 device /dev/da1s1e /*** 2 : Invalid argument*/ 1 drives: D drive1State: up Device /dev/da0s1e Avail: 0/16488 MB (0%) D drive2State: referenced Device /dev/da1s1e Avail: 0/0 MB 2 volumes: V usr State: up Plexes: 2 Size: 6780 MB V var State: up Plexes: 2 Size: 9707 MB 4 plexes: P usr.p0 C State: up Subdisks: 1 Size: 6780 MB P usr.p1 C State: up Subdisks: 1 Size: 6780 MB P var.p0 C State: up Subdisks: 1 Size: 9707 MB P var.p1 C State: up Subdisks: 1 Size: 0 B 4 subdisks: S usr.p0.s0 State: up PO:0 B Size: 6780 MB S usr.p1.s0 State: up PO:0 B Size: 6780 MB S var.p0.s0 State: up PO:0 B Size: 9707 MB S var.p1.s0 State: up PO:0 B Size: 0 B which argumen is invalid ? i use 4.10 .. please help me... Take a look at the man page or http://www.vinumvm.org/vinum/how-to-debug.html. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply or reply to the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers. Dear All, After read some paper and man page of vinum, i still have some difficulty. I have 2 disk identical disk that i want to mirrored 1:1 (RAID-1), first disk label is /#disklabel /da0 --snip-- 8 partitions: #size offsetfstype [fsize bsize bps/cpg] a: 102400004.2BSD 2048 1638490 # (Cyl.0 - 63*) b: 1048576 1024000 swap# (Cyl. 63*- 129*) c: 358409520unused0 0 # (Cyl.0 - 2230*) e: 33768376 20725764.2BSD 2048 1638489 # (Cyl. 129*- 2230*/) /#cat /etc/fstab /dev/da0s1b noneswapsw 0 0 /dev/da0s1a / ufs rw 1 1 /dev/da0s1e /usrufs rw 2 2 /dev/acd0c /cdrom cd9660 ro,noauto 0 0 proc/proc procfs rw 0 0/ my question is ; how to prepare second disk layout (ad1) and rename it, so it can user RAID-1 and boot from the second one if ad0 fail ? Please help me. regards reza so i prepare second disk layout like this : /rootback with same size with / at 1st disk /swap with same size with swap at 1st disk /NOFUTURE remaining size now i have RAID-1 at my NetServer. regards reza ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: RAID 1 in HP NetServer LC 2000
Greg 'groggy' Lehey wrote: On Monday, 11 October 2004 at 5:55:24 +0700, Muhammad Reza wrote: Ok.. vinum then.. but i have error when applied this vinum.conf drive drive1 device /dev/da0s1e drive drive2 device /dev/da1s1e volume usr setupstate plex org concat sd length 13887091s drive drive1 plex org concat sd length 13887091s drive drive2 volume var setupstate plex org concat sd length 0 drive drive1 plex org concat sd length 0 drive drive2 mail# vinum vinum -> create -f /etc/vinum.conf 2: drive drive2 device /dev/da1s1e /*** 2 : Invalid argument*/ 1 drives: D drive1State: up Device /dev/da0s1e Avail: 0/16488 MB (0%) D drive2State: referenced Device /dev/da1s1e Avail: 0/0 MB 2 volumes: V usr State: up Plexes: 2 Size: 6780 MB V var State: up Plexes: 2 Size: 9707 MB 4 plexes: P usr.p0 C State: up Subdisks: 1 Size: 6780 MB P usr.p1 C State: up Subdisks: 1 Size: 6780 MB P var.p0 C State: up Subdisks: 1 Size: 9707 MB P var.p1 C State: up Subdisks: 1 Size: 0 B 4 subdisks: S usr.p0.s0 State: up PO:0 B Size: 6780 MB S usr.p1.s0 State: up PO:0 B Size: 6780 MB S var.p0.s0 State: up PO:0 B Size: 9707 MB S var.p1.s0 State: up PO:0 B Size: 0 B which argumen is invalid ? i use 4.10 .. please help me... Take a look at the man page or http://www.vinumvm.org/vinum/how-to-debug.html. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply or reply to the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers. Dear All, After read some paper and man page of vinum, i still have some difficulty. I have 2 disk identical disk that i want to mirrored 1:1 (RAID-1), first disk label is /#disklabel /da0 --snip-- 8 partitions: #size offsetfstype [fsize bsize bps/cpg] a: 102400004.2BSD 2048 1638490 # (Cyl.0 - 63*) b: 1048576 1024000 swap# (Cyl. 63*- 129*) c: 358409520unused0 0 # (Cyl.0 - 2230*) e: 33768376 20725764.2BSD 2048 1638489 # (Cyl. 129*- 2230*/) /#cat /etc/fstab /dev/da0s1b noneswapsw 0 0 /dev/da0s1a / ufs rw 1 1 /dev/da0s1e /usrufs rw 2 2 /dev/acd0c /cdrom cd9660 ro,noauto 0 0 proc/proc procfs rw 0 0/ my question is ; how to prepare second disk layout (ad1) and rename it, so it can user RAID-1 and boot from the second one if ad0 fail ? Please help me. regards reza ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: RAID 1 in HP NetServer LC 2000
On Monday, 11 October 2004 at 5:55:24 +0700, Muhammad Reza wrote: > Ok.. vinum then.. > but i have error when applied this vinum.conf > > drive drive1 device /dev/da0s1e > drive drive2 device /dev/da1s1e > volume usr setupstate > plex org concat >sd length 13887091s drive drive1 > plex org concat >sd length 13887091s drive drive2 > volume var setupstate > plex org concat >sd length 0 drive drive1 > plex org concat >sd length 0 drive drive2 > > mail# vinum > vinum -> create -f /etc/vinum.conf > 2: drive drive2 device /dev/da1s1e > /*** 2 : Invalid argument*/ > 1 drives: > D drive1State: up Device /dev/da0s1e Avail: > 0/16488 MB (0%) > D drive2State: referenced Device /dev/da1s1e > Avail: 0/0 MB > > 2 volumes: > V usr State: up Plexes: 2 Size: 6780 MB > V var State: up Plexes: 2 Size: 9707 MB > > 4 plexes: > P usr.p0 C State: up Subdisks: 1 Size: 6780 MB > P usr.p1 C State: up Subdisks: 1 Size: 6780 MB > P var.p0 C State: up Subdisks: 1 Size: 9707 MB > P var.p1 C State: up Subdisks: 1 Size: 0 B > > 4 subdisks: > S usr.p0.s0 State: up PO:0 B Size: 6780 MB > S usr.p1.s0 State: up PO:0 B Size: 6780 MB > S var.p0.s0 State: up PO:0 B Size: 9707 MB > S var.p1.s0 State: up PO:0 B Size: 0 B > > which argumen is invalid ? i use 4.10 .. > please help me... Take a look at the man page or http://www.vinumvm.org/vinum/how-to-debug.html. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply or reply to the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers. pgptACcaXyNWh.pgp Description: PGP signature
Re: RAID 1 in HP NetServer LC 2000
Ok.. vinum then.. but i have error when applied this vinum.conf drive drive1 device /dev/da0s1e drive drive2 device /dev/da1s1e volume usr setupstate plex org concat sd length 13887091s drive drive1 plex org concat sd length 13887091s drive drive2 volume var setupstate plex org concat sd length 0 drive drive1 plex org concat sd length 0 drive drive2 mail# vinum vinum -> create -f /etc/vinum.conf 2: drive drive2 device /dev/da1s1e /*** 2 : Invalid argument*/ 1 drives: D drive1State: up Device /dev/da0s1e Avail: 0/16488 MB (0%) D drive2State: referenced Device /dev/da1s1e Avail: 0/0 MB 2 volumes: V usr State: up Plexes: 2 Size: 6780 MB V var State: up Plexes: 2 Size: 9707 MB 4 plexes: P usr.p0 C State: up Subdisks: 1 Size: 6780 MB P usr.p1 C State: up Subdisks: 1 Size: 6780 MB P var.p0 C State: up Subdisks: 1 Size: 9707 MB P var.p1 C State: up Subdisks: 1 Size: 0 B 4 subdisks: S usr.p0.s0 State: up PO:0 B Size: 6780 MB S usr.p1.s0 State: up PO:0 B Size: 6780 MB S var.p0.s0 State: up PO:0 B Size: 9707 MB S var.p1.s0 State: up PO:0 B Size: 0 B which argumen is invalid ? i use 4.10 .. please help me... regards reza Am Freitag, 8. Oktober 2004 15:47 schrieb Muhammad Reza: Dear All, Howto setup RAID 1 in HP NetServer LC 2000 ? I have 2 Seagate HDD that want to be mirror 1:1, Can i do that from Symbios software or tool from my FreeBSD 4.10 ? With 4.10 you have the choice of vinum and ccd, in 5.3 you also have gmirror for RAID1. See the man pages for details, ccd is quiet easy, vinum is a bit more complex but more flexible too. -Harry regards reza ---snip--- sym0: <896> port 0x2000-0x20ff mem 0xfd00-0xfd001fff,0xfd002000-0xfd0023ff irq 11 at device 6.0 on pci3 sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym1: <896> port 0x2400-0x24ff mem 0xfd004000-0xfd005fff,0xfd002400-0xfd0027ff irq 5 at device 6.1 on pci3 sym1: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: handling phase mismatch from SCRIPTS. ---snap--- .. .. --snip-- da0 at sym1 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) da1 at sym1 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-3 device da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) ---snap--- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED] " ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: RAID 1 in HP NetServer LC 2000
Am Freitag, 8. Oktober 2004 15:47 schrieb Muhammad Reza: > Dear All, > Howto setup RAID 1 in HP NetServer LC 2000 ? I have 2 Seagate HDD that > want to be mirror 1:1, > Can i do that from Symbios software or tool from my FreeBSD 4.10 ? With 4.10 you have the choice of vinum and ccd, in 5.3 you also have gmirror for RAID1. See the man pages for details, ccd is quiet easy, vinum is a bit more complex but more flexible too. -Harry > > regards > reza > ---snip--- > sym0: <896> port 0x2000-0x20ff mem > 0xfd00-0xfd001fff,0xfd002000-0xfd0023ff irq 11 at device 6.0 on pci3 > sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking > sym0: open drain IRQ line driver, using on-chip SRAM > sym0: using LOAD/STORE-based firmware. > sym0: handling phase mismatch from SCRIPTS. > sym1: <896> port 0x2400-0x24ff mem > 0xfd004000-0xfd005fff,0xfd002400-0xfd0027ff irq 5 at device 6.1 on pci3 > sym1: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking > sym1: open drain IRQ line driver, using on-chip SRAM > sym1: using LOAD/STORE-based firmware. > sym1: handling phase mismatch from SCRIPTS. > ---snap--- > .. > .. > --snip-- > da0 at sym1 bus 0 target 0 lun 0 > da0: Fixed Direct Access SCSI-3 device > da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing > Enabled > da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) > da1 at sym1 bus 0 target 1 lun 0 > da1: Fixed Direct Access SCSI-3 device > da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing > Enabled > da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) > ---snap--- > > > > > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" pgpHdMlgIzhgY.pgp Description: PGP signature