Re: Supported External SATA to USB Hard Drive Enclosures
Robert Huff writes: > I have an external Addonics hot-swap (warm-, actually) > enclosure. While it connects fine to the USB on the chassis, I have > never achieved transfer rates over ~3.6 bytes/sec (as measured by s/3.6 bytes/3.6 mbytes/ Robert Huff ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Supported External SATA to USB Hard Drive Enclosures
Derrick Ryalls writes: > I just recently bought a seagate TB SATA drive and Roswell > enclosure that has SATA internal and USB/eSATA as external > interface. USB worked with no difficulty and so did the eSATA > when I plugged the bracked into an existing SATA port on my mobo. > I also had good luck with Addonics being recognized, until the > enclosure itself started failing, that is. Caveat emptor: I have an external Addonics hot-swap (warm-, actually) enclosure. While it connects fine to the USB on the chassis, I have never achieved transfer rates over ~3.6 bytes/sec (as measured by dump) on what is rated for 80 mbytes/sec. While there is no conclusive evidence, eliination of other likely suspects leaves poorly designed/implemented hardware as the prime candidate. Robert Huff ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Supported External SATA to USB Hard Drive Enclosures
On Fri, Aug 22, 2008 at 6:32 AM, Doug Poland <[EMAIL PROTECTED]> wrote: > Hello, > > Can anyone recommend a manufacturer and/or model of external SATA to > USB external hard drive enclosures? I've not had luck with the > devices I pick up off-the-shelf at my local big-box consumer > electronics stores. > > BTW, I'm running FreeBSD i386 7.x. > Perhaps I am tired and therefore misunderstanding... I just recently bought a seagate TB SATA drive and Roswell enclosure that has SATA internal and USB/eSATA as external interface. USB worked with no difficulty and so did the eSATA when I plugged the bracked into an existing SATA port on my mobo. I also had good luck with Addonics being recognized, until the enclosure itself started failing, that is. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
