Thanks everyone that has helped me. Ok, so I checked the ISO image and it
was perfectly fine. So I checked the ribbon cable and it actually is a
40-conductor
___
freebsd-questions@freebsd.org mailing list
adrian esquivel wrote:
Sorry for the last message...
Thanks everyone that has helped me. Ok, so I checked the ISO image and it
was perfectly fine. So I checked the ribbon cable and it actually is a
40-conductor IDE cable. So this means that I need to change it for an
UDMA
(80 conductor)?? Oh,
adrian esquivel [EMAIL PROTECTED] wrote:
I had similar errors reported when I tried to install FreeBSD from a
CDRom drive which was connected to the motherboard with a standard
udma(33?) ribbon cable (Yes write errors). Make sure your connectors
are the better 80 conductor ones.
Thanks John but
I'm sorry, I think I didn't explain it very well...
When I choose the media type, a message is shown warning that '...this is
the last chance... we can take no responsabillity. I hit 'ok' and then a
message appears saying 'writing partitions...' and a few seconds later
appears one message saying
I've got a Maxtor of 60GB as primary master. My geometry is wrongly
reported
by the installation program, it reports a geometry of 119108/16/63 while
the
BIOS reports one of
1024/240/63.
If I'm not mistaken, I believe this is a long-time bug in the installer.
I've installed several times
If I'm not mistaken, I believe this is a long-time bug in the installer.
I've installed several times seeing this error and never had a problem.
However, to be safe you could always manually specify the geometry of your
disk in the fdisk utility during install.
I'm confused. At what point are
[EMAIL PROTECTED]
To: David Stanford [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Sent: Wed, 26 Jul 2006 07:53:31 -0600
Subject: Re: help installing FreeBSD
If I'm not mistaken, I believe this is a long-time bug in the installer.
I've installed several times seeing this error
adrian esquivel [EMAIL PROTECTED] wrote:
Hi! I've been trying to install FBSD on my computer, but I keep getting an
error message that I have absolutely no idea what it means. This is what I
get when I hit Alt+F2
DEBUG: Scanning disk ad0 for root filesystem
DEBUG: Scanning disk ad0 for swap
Igor Robul wrote:
On Sat, Feb 11, 2006 at 07:36:08AM +, Robert Slade wrote:
There are some minor issues with nvida video 3d cards but there are
nvida drivers for BSD. ATI cards are a bit more of a problem. In both
cases search the mailing list archives the info is there.
I dont
On Thu, Feb 16, 2006 at 05:04:01PM +1100, Norberto Meijome wrote:
1) once you installed the graphics/dri , how do you enable them in
xorg.conf?
Unfortunately I cannot tell you about configuration you need for 855G,
but at least you need load kernel module for 855G, and place
Load dri
Load glx
to
On Sat, Feb 11, 2006 at 07:36:08AM +, Robert Slade wrote:
There are some minor issues with nvida video 3d cards but there are
nvida drivers for BSD. ATI cards are a bit more of a problem. In both
cases search the mailing list archives the info is there.
I dont see any problems with ATI
Alexandre Adao wrote:
I am VERY new on FeeBSD and I installed it using the
standard option. How can have freeBSD 6.0 runing on
GUI? Is there any step by step proceedure?
Thanks for any help.
--Alex
Read the following:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x11-wm.html
--
On Fri, 2006-02-10 at 22:24, Alexandre Adao wrote:
I am VERY new on FeeBSD and I installed it using the
standard option. How can have freeBSD 6.0 runing on
GUI? Is there any step by step proceedure?
Thanks for any help.
--Alex
Alex,
Welcome
Every thing you should need to know is in the
13 matches
Mail list logo
