Frank asked on Tue Jan 20, 2004:
I have a HP Proliant DL380 with two broadcomm 10/100/1000 RJ45 interfaces
my problem is the interface does not negociate properly with the switch
interface ( Alcatel 7700 ) and each time I start the server the DUPLEX
mode
is set to HALF that I do not want.
On Tue, Jan 20, 2004 at 08:36:19PM +1030, Rob wrote:
From reading ifconfig(8) and bge(4), it looks like you should add
mediaopt full-duplex
to the end of your ifconfig_bge0 entry in /etc/rc.conf.
Well this doesn't seems to work
it seems to break the interface
and I cannot ping the
]
Subject: Re: how to force network interface ?
On Tue, Jan 20, 2004 at 08:36:19PM +1030, Rob wrote:
From reading ifconfig(8) and bge(4), it looks like you should add
mediaopt full-duplex
to the end of your ifconfig_bge0 entry in /etc/rc.conf.
Well this doesn't seems to work
it seems to break
On Tue, Jan 20, 2004 at 09:46:35AM -0500, fbsd_user wrote:
Are you sure all your down stream switches and hubs are full-duplex?
If one is not, it will force the whole leg to it's setting.
yes I am sure
I have tested the 3 possibility
I am able to parameter on my switch
half
full
auto
in any
