Re: onboard sound does not work
On Mon, 2004-02-09 at 17:05, Nicolas wrote: > On Monday 09 February 2004 22.29, Andrew Hall wrote: > > On Mon, 2004-02-09 at 16:24, Nicolas wrote: > > > On Monday 09 February 2004 21.50, Andrew Hall wrote: > > > > On Mon, 2004-02-09 at 15:24, Nathan Kinkade wrote: > > > > > On Mon, Feb 09, 2004 at 03:47:31PM +0100, by way of Gaf > > > > > > <[EMAIL PROTECTED]> wrote: > > > > > > Hello. > > > > > > I am a newbie to both unix and FreeBSD. I am trying to configure my > > > > > > onboard sond without success. > > > > > > My motherboard: ASUS P4S800-MX > > > > > > Audio spec: ADI AD1888 6channel audio codec. > > > > > > > > > > > > pciconf -lv says: > > > > > > [EMAIL PROTECTED]:2:7: class=0x040100 card=0x810d1043 chip=0x70121039 > > > > > > rev=0xa0 hdr=0x00 > > > > > > vendor = 'Silicon Integrated Systems (SiS)' > > > > > > device = 'SiS7012 PCI Audio Accelerator' > > > > > > class= multimedia > > > > > > subclass = audio > > > > > > > > > > > > dmesg: > > > > > > pcm0: port 0xa000-0xa07f,0xa400-0xa4ff irq 18 at device > > > > > > 2.7 on pci0 pcm0: > > > > > > > > > > > > I tried kldload snd_driver.ko but > > > > > > kldstat says: > > > > > > Id Refs AddressSize Name > > > > > > 1 35 0xc040 37fd84 kernel > > > > > > 21 0xc078 51a18acpi.ko > > > > > > 31 0xc2c24000 8000 ipfw.ko > > > > > > 41 0xc2c62000 19000linux.ko > > > > > > 51 0xc3306000 2000 snd_driver.ko > > > > > > 61 0xc3308000 8000 snd_maestro3.ko > > > > > > > > > > > > I have device pcm in my kernel. > > > > > > Is there something more you need to know?? > > > > > > I have read man pcm, the handbook and complete freebsd but I can t > > > > > > figure it out. I still think that everything is a bit confusing > > > > > > because i am not very good at computers and i am sure that I miss > > > > > > something fundamental. Hope that somebody can direct me to what i > > > > > > am missing. Many thanks Gaf > > > > > > > > I think you need snd_ich.ko. Run 'kldload /boot/kernel/snd_ich.ko' and > > > > try again. Search the freebsd list archives for 'sis 7012' and you'll > > > > find a lot of relevant entries. > > > > > > > > Drew > > > > > > > > ___ > > > > [EMAIL PROTECTED] mailing list > > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > > > To unsubscribe, send any mail to > > > > "[EMAIL PROTECTED]" > > > > > > Hi. > > > I tried to do what you suggested and I get: > > > kldload: can't load snd_ich.ko: File exists > > > I have also tried with options PNPBIOS before but that is already in 5.2, > > > I was told. > > > I will look in the archives. > > > Thank You for answering!! > > > Gaf > > > > I can't guarantee success, but I would kldunload snd_driver.ko and > > snd_maestro, then kldload snd_pcm.ko and snd_ich.ko. I use the ich > > driver, and thats the only two sound modules I load. > > > > Drew > > Nope. No sucess this time either. Just tells me the files exists. And I > checked the arhives multimedia and questions and there where no entries for > SiS 7012. Back to zero. > Prehaps it is not supported?? > Thanks again. > Sorry man wish I could help out more. FWIW I searched for 'sis 7012' and found a few postings on the first page of results. The file exists error means that you are attempting to load a module into the kernel that is already there via another module or compiled in, Drew ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: onboard sound does not work
On Monday 09 February 2004 22.29, Andrew Hall wrote: > On Mon, 2004-02-09 at 16:24, Nicolas wrote: > > On Monday 09 February 2004 21.50, Andrew Hall wrote: > > > On Mon, 2004-02-09 at 15:24, Nathan Kinkade wrote: > > > > On Mon, Feb 09, 2004 at 03:47:31PM +0100, by way of Gaf > > > > <[EMAIL PROTECTED]> wrote: > > > > > Hello. > > > > > I am a newbie to both unix and FreeBSD. I am trying to configure my > > > > > onboard sond without success. > > > > > My motherboard: ASUS P4S800-MX > > > > > Audio spec: ADI AD1888 6channel audio codec. > > > > > > > > > > pciconf -lv says: > > > > > [EMAIL PROTECTED]:2:7: class=0x040100 card=0x810d1043 chip=0x70121039 > > > > > rev=0xa0 hdr=0x00 > > > > > vendor = 'Silicon Integrated Systems (SiS)' > > > > > device = 'SiS7012 PCI Audio Accelerator' > > > > > class= multimedia > > > > > subclass = audio > > > > > > > > > > dmesg: > > > > > pcm0: port 0xa000-0xa07f,0xa400-0xa4ff irq 18 at device > > > > > 2.7 on pci0 pcm0: > > > > > > > > > > I tried kldload snd_driver.ko but > > > > > kldstat says: > > > > > Id Refs AddressSize Name > > > > > 1 35 0xc040 37fd84 kernel > > > > > 21 0xc078 51a18acpi.ko > > > > > 31 0xc2c24000 8000 ipfw.ko > > > > > 41 0xc2c62000 19000linux.ko > > > > > 51 0xc3306000 2000 snd_driver.ko > > > > > 61 0xc3308000 8000 snd_maestro3.ko > > > > > > > > > > I have device pcm in my kernel. > > > > > Is there something more you need to know?? > > > > > I have read man pcm, the handbook and complete freebsd but I can t > > > > > figure it out. I still think that everything is a bit confusing > > > > > because i am not very good at computers and i am sure that I miss > > > > > something fundamental. Hope that somebody can direct me to what i > > > > > am missing. Many thanks Gaf > > > > > > I think you need snd_ich.ko. Run 'kldload /boot/kernel/snd_ich.ko' and > > > try again. Search the freebsd list archives for 'sis 7012' and you'll > > > find a lot of relevant entries. > > > > > > Drew > > > > > > ___ > > > [EMAIL PROTECTED] mailing list > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > > To unsubscribe, send any mail to > > > "[EMAIL PROTECTED]" > > > > Hi. > > I tried to do what you suggested and I get: > > kldload: can't load snd_ich.ko: File exists > > I have also tried with options PNPBIOS before but that is already in 5.2, > > I was told. > > I will look in the archives. > > Thank You for answering!! > > Gaf > > I can't guarantee success, but I would kldunload snd_driver.ko and > snd_maestro, then kldload snd_pcm.ko and snd_ich.ko. I use the ich > driver, and thats the only two sound modules I load. > > Drew Nope. No sucess this time either. Just tells me the files exists. And I checked the arhives multimedia and questions and there where no entries for SiS 7012. Back to zero. Prehaps it is not supported?? Thanks again. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: onboard sound does not work
On Mon, 2004-02-09 at 16:24, Nicolas wrote: > On Monday 09 February 2004 21.50, Andrew Hall wrote: > > On Mon, 2004-02-09 at 15:24, Nathan Kinkade wrote: > > > On Mon, Feb 09, 2004 at 03:47:31PM +0100, by way of Gaf > <[EMAIL PROTECTED]> wrote: > > > > Hello. > > > > I am a newbie to both unix and FreeBSD. I am trying to configure my > > > > onboard sond without success. > > > > My motherboard: ASUS P4S800-MX > > > > Audio spec: ADI AD1888 6channel audio codec. > > > > > > > > pciconf -lv says: > > > > [EMAIL PROTECTED]:2:7: class=0x040100 card=0x810d1043 chip=0x70121039 rev=0xa0 > > > > hdr=0x00 > > > > vendor = 'Silicon Integrated Systems (SiS)' > > > > device = 'SiS7012 PCI Audio Accelerator' > > > > class= multimedia > > > > subclass = audio > > > > > > > > dmesg: > > > > pcm0: port 0xa000-0xa07f,0xa400-0xa4ff irq 18 at device 2.7 > > > > on pci0 pcm0: > > > > > > > > I tried kldload snd_driver.ko but > > > > kldstat says: > > > > Id Refs AddressSize Name > > > > 1 35 0xc040 37fd84 kernel > > > > 21 0xc078 51a18acpi.ko > > > > 31 0xc2c24000 8000 ipfw.ko > > > > 41 0xc2c62000 19000linux.ko > > > > 51 0xc3306000 2000 snd_driver.ko > > > > 61 0xc3308000 8000 snd_maestro3.ko > > > > > > > > I have device pcm in my kernel. > > > > Is there something more you need to know?? > > > > I have read man pcm, the handbook and complete freebsd but I can t > > > > figure it out. I still think that everything is a bit confusing because > > > > i am not very good at computers and i am sure that I miss something > > > > fundamental. Hope that somebody can direct me to what i am missing. > > > > Many thanks Gaf > > > > I think you need snd_ich.ko. Run 'kldload /boot/kernel/snd_ich.ko' and > > try again. Search the freebsd list archives for 'sis 7012' and you'll > > find a lot of relevant entries. > > > > Drew > > > > ___ > > [EMAIL PROTECTED] mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to > > "[EMAIL PROTECTED]" > Hi. > I tried to do what you suggested and I get: > kldload: can't load snd_ich.ko: File exists > I have also tried with options PNPBIOS before but that is already in 5.2, I > was told. > I will look in the archives. > Thank You for answering!! > Gaf I can't guarantee success, but I would kldunload snd_driver.ko and snd_maestro, then kldload snd_pcm.ko and snd_ich.ko. I use the ich driver, and thats the only two sound modules I load. Drew ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: onboard sound does not work
On Monday 09 February 2004 21.50, Andrew Hall wrote: > On Mon, 2004-02-09 at 15:24, Nathan Kinkade wrote: > > On Mon, Feb 09, 2004 at 03:47:31PM +0100, by way of Gaf <[EMAIL PROTECTED]> wrote: > > > Hello. > > > I am a newbie to both unix and FreeBSD. I am trying to configure my > > > onboard sond without success. > > > My motherboard: ASUS P4S800-MX > > > Audio spec: ADI AD1888 6channel audio codec. > > > > > > pciconf -lv says: > > > [EMAIL PROTECTED]:2:7: class=0x040100 card=0x810d1043 chip=0x70121039 rev=0xa0 > > > hdr=0x00 > > > vendor = 'Silicon Integrated Systems (SiS)' > > > device = 'SiS7012 PCI Audio Accelerator' > > > class= multimedia > > > subclass = audio > > > > > > dmesg: > > > pcm0: port 0xa000-0xa07f,0xa400-0xa4ff irq 18 at device 2.7 > > > on pci0 pcm0: > > > > > > I tried kldload snd_driver.ko but > > > kldstat says: > > > Id Refs AddressSize Name > > > 1 35 0xc040 37fd84 kernel > > > 21 0xc078 51a18acpi.ko > > > 31 0xc2c24000 8000 ipfw.ko > > > 41 0xc2c62000 19000linux.ko > > > 51 0xc3306000 2000 snd_driver.ko > > > 61 0xc3308000 8000 snd_maestro3.ko > > > > > > I have device pcm in my kernel. > > > Is there something more you need to know?? > > > I have read man pcm, the handbook and complete freebsd but I can t > > > figure it out. I still think that everything is a bit confusing because > > > i am not very good at computers and i am sure that I miss something > > > fundamental. Hope that somebody can direct me to what i am missing. > > > Many thanks Gaf > > I think you need snd_ich.ko. Run 'kldload /boot/kernel/snd_ich.ko' and > try again. Search the freebsd list archives for 'sis 7012' and you'll > find a lot of relevant entries. > > Drew > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" Hi. I tried to do what you suggested and I get: kldload: can't load snd_ich.ko: File exists I have also tried with options PNPBIOS before but that is already in 5.2, I was told. I will look in the archives. Thank You for answering!! Gaf ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: onboard sound does not work
On Monday 09 February 2004 21.24, you wrote: > On Mon, Feb 09, 2004 at 03:47:31PM +0100, by way of Gaf <[EMAIL PROTECTED]> wrote: > > Hello. > > I am a newbie to both unix and FreeBSD. I am trying to configure my > > onboard sond without success. > > My motherboard: ASUS P4S800-MX > > Audio spec: ADI AD1888 6channel audio codec. > > > > pciconf -lv says: > > [EMAIL PROTECTED]:2:7: class=0x040100 card=0x810d1043 chip=0x70121039 rev=0xa0 > > hdr=0x00 > > vendor = 'Silicon Integrated Systems (SiS)' > > device = 'SiS7012 PCI Audio Accelerator' > > class= multimedia > > subclass = audio > > > > dmesg: > > pcm0: port 0xa000-0xa07f,0xa400-0xa4ff irq 18 at device 2.7 on > > pci0 pcm0: > > > > I tried kldload snd_driver.ko but > > kldstat says: > > Id Refs AddressSize Name > > 1 35 0xc040 37fd84 kernel > > 21 0xc078 51a18acpi.ko > > 31 0xc2c24000 8000 ipfw.ko > > 41 0xc2c62000 19000linux.ko > > 51 0xc3306000 2000 snd_driver.ko > > 61 0xc3308000 8000 snd_maestro3.ko > > > > I have device pcm in my kernel. > > Is there something more you need to know?? > > I have read man pcm, the handbook and complete freebsd but I can t figure > > it out. I still think that everything is a bit confusing because i am not > > very good at computers and i am sure that I miss something fundamental. > > Hope that somebody can direct me to what i am missing. > > Many thanks Gaf > > I really don't know much about sound, but since there are no replies as > of yet: in my experience, once the pcm module finds a device then things > seem to work. In what ways have you verified that sound is not in fact > working? Are you using devfs? If not, are the sound devices created: > dsp, etc > > Nathan Hi. Sorry but you go to fast. I am very new to FreeBSD I have now installed a soundcard from a friend and it works SB live. [EMAIL PROTECTED]:10:0: class=0x040100 card=0x80261102 chip=0x00021102 rev=0x07 hdr=0x00 vendor = 'Creative Labs' device = 'EMU10K1 Audio Chipset (SB Live!)' class= multimedia subclass = audio Before this I could not play audio cd:s But I still need to configure my own card/chips. Thank you for answering!! Gaf ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: onboard sound does not work
On Mon, 2004-02-09 at 15:24, Nathan Kinkade wrote: > On Mon, Feb 09, 2004 at 03:47:31PM +0100, by way of Gaf <[EMAIL PROTECTED]> wrote: > > Hello. > > I am a newbie to both unix and FreeBSD. I am trying to configure my onboard > > sond without success. > > My motherboard: ASUS P4S800-MX > > Audio spec: ADI AD1888 6channel audio codec. > > > > pciconf -lv says: > > [EMAIL PROTECTED]:2:7: class=0x040100 card=0x810d1043 chip=0x70121039 rev=0xa0 > > hdr=0x00 > > vendor = 'Silicon Integrated Systems (SiS)' > > device = 'SiS7012 PCI Audio Accelerator' > > class= multimedia > > subclass = audio > > > > dmesg: > > pcm0: port 0xa000-0xa07f,0xa400-0xa4ff irq 18 at device 2.7 on > > pci0 pcm0: > > > > I tried kldload snd_driver.ko but > > kldstat says: > > Id Refs AddressSize Name > > 1 35 0xc040 37fd84 kernel > > 21 0xc078 51a18acpi.ko > > 31 0xc2c24000 8000 ipfw.ko > > 41 0xc2c62000 19000linux.ko > > 51 0xc3306000 2000 snd_driver.ko > > 61 0xc3308000 8000 snd_maestro3.ko > > > > I have device pcm in my kernel. > > Is there something more you need to know?? > > I have read man pcm, the handbook and complete freebsd but I can t figure it > > out. I still think that everything is a bit confusing because i am not very > > good at computers and i am sure that I miss something fundamental. > > Hope that somebody can direct me to what i am missing. > > Many thanks Gaf > I think you need snd_ich.ko. Run 'kldload /boot/kernel/snd_ich.ko' and try again. Search the freebsd list archives for 'sis 7012' and you'll find a lot of relevant entries. Drew ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: onboard sound does not work
On Mon, Feb 09, 2004 at 03:47:31PM +0100, by way of Gaf <[EMAIL PROTECTED]> wrote: > Hello. > I am a newbie to both unix and FreeBSD. I am trying to configure my onboard > sond without success. > My motherboard: ASUS P4S800-MX > Audio spec: ADI AD1888 6channel audio codec. > > pciconf -lv says: > [EMAIL PROTECTED]:2:7: class=0x040100 card=0x810d1043 chip=0x70121039 rev=0xa0 > hdr=0x00 > vendor = 'Silicon Integrated Systems (SiS)' > device = 'SiS7012 PCI Audio Accelerator' > class= multimedia > subclass = audio > > dmesg: > pcm0: port 0xa000-0xa07f,0xa400-0xa4ff irq 18 at device 2.7 on > pci0 pcm0: > > I tried kldload snd_driver.ko but > kldstat says: > Id Refs AddressSize Name > 1 35 0xc040 37fd84 kernel > 21 0xc078 51a18acpi.ko > 31 0xc2c24000 8000 ipfw.ko > 41 0xc2c62000 19000linux.ko > 51 0xc3306000 2000 snd_driver.ko > 61 0xc3308000 8000 snd_maestro3.ko > > I have device pcm in my kernel. > Is there something more you need to know?? > I have read man pcm, the handbook and complete freebsd but I can t figure it > out. I still think that everything is a bit confusing because i am not very > good at computers and i am sure that I miss something fundamental. > Hope that somebody can direct me to what i am missing. > Many thanks Gaf I really don't know much about sound, but since there are no replies as of yet: in my experience, once the pcm module finds a device then things seem to work. In what ways have you verified that sound is not in fact working? Are you using devfs? If not, are the sound devices created: dsp, etc Nathan -- gpg --keyserver pgp.mit.edu --recv-keys D8527E49 pgp0.pgp Description: PGP signature
