Re: SATA disk problem
Wojciech Puchar <[EMAIL PROTECTED]> writes: > i have 2 identical drives in my machine. [snip] > HOW to enable write cache on second drive? According to "man 4 ata", there is a loader tunable "hw.ata.wc" which does this. However, it supposedly defaults to enabled, and applies to all drives. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: SATA disk problem - everything clear
installed /usr/ports/sysutils/smartmontools/ and smartctl showed this sorry for taking Your time all is clear - i need new drive Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051Pre-fail Always - 0 3 Spin_Up_Time0x0003 209 205 021Pre-fail Always - 2516 4 Start_Stop_Count0x0032 100 100 000Old_age Always - 9 5 Reallocated_Sector_Ct 0x0033 133 133 140Pre-fail Always FAILING_NOW 531 ^^ drugi ma wszystko OK 7 Seek_Error_Rate 0x000f 200 200 051Pre-fail Always - 0 9 Power_On_Hours 0x0032 097 097 000Old_age Always - 2846 10 Spin_Retry_Count0x0013 100 253 051Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 253 051Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000Old_age Always - 8 190 Unknown_Attribute 0x0022 062 042 045Old_age Always In_the_past 38 ^^ 194 Temperature_Celsius 0x0022 109 089 000Old_age Always - 38 196 Reallocated_Event_Count 0x0032 176 176 000Old_age Always - 24 197 Current_Pending_Sector 0x0012 200 200 000Old_age Always - 0 198 Offline_Uncorrectable 0x0010 200 200 000Old_age Offline - 0 199 UDMA_CRC_Error_Count0x003e 200 200 000Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 200 200 051Pre-fail Offline - 0 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
SATA disk problem - more info
atacontrol reinit ata3 makes atacontrol cap ad6 showing that write cache is enabled - until i write anything to that drive then it changes to no. is it disk hardware problem or other? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
SATA disk problem
i have 2 identical drives in my machine. atacontrol cap ad4 says: Protocol Serial ATA II device model WDC WD1600JS-60NCB1 serial number WD-WCANM4915646 firmware revision 10.02E02 cylinders 16383 heads 16 sectors/track 63 lba supported 268435455 sectors lba48 supported 312581808 sectors dma supported overlap not supported Feature Support EnableValue Vendor write cacheyes no read ahead yes yes Native Command Queuing (NCQ) yes - 31/0x1F Tagged Command Queuing (TCQ) no no 31/0x1F SMART yes yes microcode download yes yes security no no power management yes yes advanced power management no no 0/0x00 automatic acoustic management no no 0/0x00 0/0x00 while atacontrol cap ad6 says: Protocol Serial ATA II device model WDC WD1600JS-60NCB1 serial number WD-WCANM4915646 firmware revision 10.02E02 cylinders 16383 heads 16 sectors/track 63 lba supported 268435455 sectors lba48 supported 312581808 sectors dma supported overlap not supported Feature Support EnableValue Vendor write cacheyes no read ahead yes yes Native Command Queuing (NCQ) yes - 31/0x1F Tagged Command Queuing (TCQ) no no 31/0x1F SMART yes yes microcode download yes yes security no no power management yes yes advanced power management no no 0/0x00 automatic acoustic management no no 0/0x00 0/0x00 HOW to enable write cache on second drive? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"