Re: How do I spinup disk from power-up in standby ?
simply read any sector On Mon, 9 Feb 2009, Dieter wrote: Western Digital SATA disk in power-up in standby mode. disk is connected to nforce4-ultra FreeBSD 7.0 amd64 Google found that MirBSD's atactl man page has: puisspinup Explicitly spins up the device if power-up in standby (puis) mode is enabled. I can't find anything like this on FreeBSD. (I checked 7.1 also) And the disk doesn't show up in dmesg. It should be ad6, but there is no ad6 and no Western Digital or WD in dmesg. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: How do I spinup disk from power-up in standby ?
mode is enabled. I can't find anything like this on FreeBSD. (I checked 7.1 also) And the disk doesn't show up in dmesg. It should be ad6, but there is no ad6 and no Western Digital or WD in dmesg. sorry i missed this. here is a problem that it's not seen. when it enters such a mode? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
How do I spinup disk from power-up in standby ?
Western Digital SATA disk in power-up in standby mode. disk is connected to nforce4-ultra FreeBSD 7.0 amd64 Google found that MirBSD's atactl man page has: puisspinup Explicitly spins up the device if power-up in standby (puis) mode is enabled. I can't find anything like this on FreeBSD. (I checked 7.1 also) And the disk doesn't show up in dmesg. It should be ad6, but there is no ad6 and no Western Digital or WD in dmesg. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Standby
Dear Users, My laptop is ASUS M2Ne, and the OS is FreeBSD 7.0. I would like to keep my PC standby when it is not in use. I have noticed a web page about FreeBSD on laptops (http://www.freebsd.org/doc/en/articles/laptop/article.html). It says that if I want to figure out if the power management system can support mine, I have to try every possible option. I wonder if there is any list telling what models the apm or acpi system supports? If them can not support the Asus M2Ne, and I want to inquire a related question. If the laptop is on but not in standby or hibernated mode, and I want to bring it with me, moving from a room to another from time to time. Will this action bring damage to my laptop? Should I always shutdown it before I move it? Thanks in advance! -- HUANG Ronggui, Wincent http://ronggui.huang.googlepages.com/ Ph.D. Candidate, CityU of HK Master of sociology, Fudan University, China Bachelor of Social Work, Fudan University, China ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ACPI: Standby, sleep, suspend and resume
Hi: I have the following sysctl parameters: hw.acpi.supported_sleep_state: S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S3 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 First, I'd like that the screen is switched off when the lid closes, so I assume that I should set hw.acpi.lid_switch_state to something, but I don't know what. Second: Is there a way to manually toggle the sleep state so I can create a menu item sleep or standby? Last: When the laptop goes into some suspend mode - I don't know which - I don't know how to bring it back alive except for rebooting. What is the secret key combination? (typically). Thanks, Erik -- Ph: +34.666334818 web: http://www.locolomo.org smime.p7s Description: S/MIME Cryptographic Signature
Re: ACPI: Standby, sleep, suspend and resume
On Sat, 25 Nov 2006, Erik Norgaard wrote: Hi: I have the following sysctl parameters: hw.acpi.supported_sleep_state: S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S3 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 First, I'd like that the screen is switched off when the lid closes, so I assume that I should set hw.acpi.lid_switch_state to something, but I don't know what. Second: Is there a way to manually toggle the sleep state so I can create a menu item sleep or standby? Last: When the laptop goes into some suspend mode - I don't know which - I don't know how to bring it back alive except for rebooting. What is the secret key combination? (typically). Thanks, Erik These are my settings. This is for a thinkpad T42p, your settings may be slightly different. sysctl: hw.acpi.supported_sleep_state: S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S3 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 3 /boot/loader.conf snd_ich_load=YES if_ipw_load=YES wlan_load=YES wlan_wep_load=YES acpi_ibm_load=YES for thinkpad If I close the lid the T42p goes to standby, opening wakes up. The sleep button fn-F4 does a suspend, again opening the lid does a resume. I have not figured out suspend to disk but for my purposes suspend draws power so slowly, I have not bothered. It may be that you do need something set for hw.acpi.lid_switch_state, I do not. Resume does not correctly redraw the X-windows background, but it writing this I noticed I put: notify 10 { match system ACPI; match subsystem Lid; action /usr/X11R6/bin/xrandr -display :0.0 -s 0; }; inside of the comments in /etc/devd.conf. I got most of my information from: http://www.cs.ucr.edu/~trep/tsrT40freebsd.html google various Linux sites talking about thinkpads ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ACPI: Standby, sleep, suspend and resume
On Sat, 25 Nov 2006, doug wrote: On Sat, 25 Nov 2006, Erik Norgaard wrote: Hi: I have the following sysctl parameters: hw.acpi.supported_sleep_state: S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S3 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 First, I'd like that the screen is switched off when the lid closes, so I assume that I should set hw.acpi.lid_switch_state to something, but I don't know what. Second: Is there a way to manually toggle the sleep state so I can create a menu item sleep or standby? Last: When the laptop goes into some suspend mode - I don't know which - I don't know how to bring it back alive except for rebooting. What is the secret key combination? (typically). Thanks, Erik These are my settings. This is for a thinkpad T42p, your settings may be slightly different. sysctl: hw.acpi.supported_sleep_state: S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S3 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 3 /boot/loader.conf snd_ich_load=YES if_ipw_load=YES wlan_load=YES wlan_wep_load=YES acpi_ibm_load=YES for thinkpad If I close the lid the T42p goes to standby, opening wakes up. The sleep button fn-F4 does a suspend, again opening the lid does a resume. I have not figured out suspend to disk but for my purposes suspend draws power so slowly, I have not bothered. It may be that you do need something set for hw.acpi.lid_switch_state, I do not. Resume does not correctly redraw the X-windows background, but it writing this I noticed I put: notify 10 { match system ACPI; match subsystem Lid; action /usr/X11R6/bin/xrandr -display :0.0 -s 0; }; inside of the comments in /etc/devd.conf. I got most of my information from: http://www.cs.ucr.edu/~trep/tsrT40freebsd.html google various Linux sites talking about thinkpads The devd.conf change works. Trying to help you helped me. I hope this information aids you as well. Without the xrandr, I got black and white stripes randomly for the background. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
idle, standby, suspend harddisk
Hi all :-) i have a server with several hd always on i want idle hard disk after several minutes the bios of mother b. is not good for do this, and i'd like use a software which atailde or others.. with ataidle i can idle my hd but how check if hd is really in idle mode? Are there others ports 4 do this? With linux i use hdparm, but there isn't on freebsd. Anyone can i help me? Thanks :-) Pol ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: idle, standby, suspend harddisk
Pol Hallen wrote on Monday 27 February 2006 12:18: Hi all :-) i have a server with several hd always on i want idle hard disk after several minutes the bios of mother b. is not good for do this, and i'd like use a software which atailde or others.. with ataidle i can idle my hd but how check if hd is really in idle mode? Are there others ports 4 do this? With linux i use hdparm, but there isn't on freebsd. Anyone can i help me? Thanks :-) I don't know much about linux but perhaps atacontrol is your answer. After a atacontrol detach the disk spins down. Better umount it first or the system will hang if you use that disk again. You have to use atacontrol to attach it again. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: idle, standby, suspend harddisk
After a atacontrol detach the disk spins down. Better umount it first or the system will hang if you use that disk again. You have to use atacontrol to attach it again. It's a very good idea! ;-) i'll do a script to umount fs and atacontrol detach.. well, how wait about 10 minutes of inactivity of the disk and excute a script? And while a client (samba) open a share dir on that disk? mhmhm...i think is hard! Pol ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
2nd monitor not powering up (stuck in standby)
Slightly weird problem. I'm running a 5.4-current dual-head Xinerama setup (using two Nvidia FX5500 PCI cards). Powered off my box to move. Powered up box. Second monitor is now stuck in standby state (appears to be not be receiving signal from the motherboard). Monitor that doesn't work is orginally terminated to card in pci slot#2. Remove all the video cards, throw a single card in pci slot #2, get signal. Throw second video card in unused slot (try both #1 and #3), second monitor doesn't get signal. I've verified both monitors are good. Box in question is a Dell Dimension 8400. Dmesg indicates that it detects both cards, xorg config file is good. I've got the latest video drivers, a and pretty recent Xorg version. I've reset BIOS, I've verified from what I can tell that FreeBSD isn't doing anything stupid. Other then thinking it may be a power issue, I'm pretty much stumped. So has anyone seen something similar to this? Many thanks in advance. Cheers, /madley ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Standby mode for monitor.
On Fri, 13 Feb 2004 04:23, Lowell Gilbert wrote: Eric F Crist [EMAIL PROTECTED] writes: On Thursday 12 February 2004 07:13 am, Malcolm Kay wrote: I'd like to be able to switch the monitors on a number of our computers into standby mode from a software program running on a virtual console; and wakeup either when a key is pressed or when the program has new information to display. I can probably manage to control blank screen savers but I would prefer to power down the displays to standby modes. The machines are those small size 'kitchen computer' VIA based cubes (almost). The monitors are LCD displays. Are there ioctls to help with this? How do I go about it? Malcolm, FWIW, there's an option called DPMS in your XF86Config file under the monitors section. I know you have to have a fairly recent version of X for this. Eric, I was asking specifically about programs on virtual console. But thanks anyway. It's been there a long time, actually. On the console, there's a green screensaver and an apm screensaver. Thanks Lowell, The green_saver suits my needs rather well. {I was looking for a much more difficult solution ;-) } Malcolm ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Standby mode for monitor.
I'd like to be able to switch the monitors on a number of our computers into standby mode from a software program running on a virtual console; and wakeup either when a key is pressed or when the program has new information to display. I can probably manage to control blank screen savers but I would prefer to power down the displays to standby modes. The machines are those small size 'kitchen computer' VIA based cubes (almost). The monitors are LCD displays. Are there ioctls to help with this? How do I go about it? All ideas welcomed. Malcolm Kay Dmesg -- Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-RELEASE #1: Mon Sep 8 11:54:33 CST 2003 [EMAIL PROTECTED]:/usr/src/sys/compile/PCISIO Timecounter i8254 frequency 1193182 Hz Timecounter TSC frequency 800033673 Hz CPU: VIA C3 Samuel 2 (800.03-MHz 686-class CPU) Origin = CentaurHauls Id = 0x673 Stepping = 3 Features=0x803035FPU,DE,TSC,MSR,MTRR,PGE,MMX real memory = 259981312 (253888K bytes) avail memory = 248987648 (243152K bytes) Preloaded elf kernel kernel at 0xc03e9000. Preloaded elf module blank_saver.ko at 0xc03e909c. md0: Malloc disk Using $PIR table, 5 entries at 0xc00fdf20 npx0: math processor on motherboard npx0: INT 16 interface pcib0: Host to PCI bridge on motherboard pci0: PCI bus on pcib0 pcib1: PCI to PCI bridge (vendor=1106 device=8601) at device 1.0 on pci0 pci1: PCI bus on pcib1 pci1: Trident model 8500 VGA-compatible display device at 0.0 irq 11 isab0: PCI to ISA bridge (vendor=1106 device=8231) at device 17.0 on pci0 isa0: ISA bus on isab0 atapci0: VIA 8231 ATA100 controller port 0xd000-0xd00f at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: VIA 83C572 USB controller port 0xd400-0xd41f irq 5 at device 17.2 on pci0 usb0: VIA 83C572 USB controller on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: VIA 83C572 USB controller port 0xd800-0xd81f irq 5 at device 17.3 on pci0 usb1: VIA 83C572 USB controller on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered chip1: PCI to Other bridge (vendor=1106 device=8235) at device 17.4 on pci0 chip2: VIA 82C686 AC97 Audio port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 10 at device 17.5 on pci0 vr0: VIA VT6102 Rhine II 10/100BaseTX port 0xe800-0xe8ff mem 0xeb00-0xebff irq 11 at device 18.0 on pci0 vr0: Ethernet address: 00:40:63:cb:8b:f0 miibus0: MII bus on vr0 ukphy0: Generic IEEE 802.3u media interface on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto puc0: Dolphin Peripherals 4036 port 0xec00-0xec1f irq 12 at device 20.0 on pci0 sio0: type 16550A sio1: type 16550A orm0: Option ROM at iomem 0xc-0xcbfff on isa0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio2 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio2: type 16550A ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 ad0: 78167MB Maxtor 6Y080L0 [158816/16/63] at ata0-master UDMA100 Mounting root from ufs:/dev/ad0s1a ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Standby mode for monitor.
On Thursday 12 February 2004 07:13 am, Malcolm Kay wrote: I'd like to be able to switch the monitors on a number of our computers into standby mode from a software program running on a virtual console; and wakeup either when a key is pressed or when the program has new information to display. I can probably manage to control blank screen savers but I would prefer to power down the displays to standby modes. The machines are those small size 'kitchen computer' VIA based cubes (almost). The monitors are LCD displays. Are there ioctls to help with this? How do I go about it? Malcolm, FWIW, there's an option called DPMS in your XF86Config file under the monitors section. I know you have to have a fairly recent version of X for this. HTH -- Eric F Crist AdTech Integrated Systems, Inc (612) 998-3588 pgp0.pgp Description: signature
Re: Standby mode for monitor.
Eric F Crist [EMAIL PROTECTED] writes: On Thursday 12 February 2004 07:13 am, Malcolm Kay wrote: I'd like to be able to switch the monitors on a number of our computers into standby mode from a software program running on a virtual console; and wakeup either when a key is pressed or when the program has new information to display. I can probably manage to control blank screen savers but I would prefer to power down the displays to standby modes. The machines are those small size 'kitchen computer' VIA based cubes (almost). The monitors are LCD displays. Are there ioctls to help with this? How do I go about it? Malcolm, FWIW, there's an option called DPMS in your XF86Config file under the monitors section. I know you have to have a fairly recent version of X for this. It's been there a long time, actually. On the console, there's a green screensaver and an apm screensaver. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: automatic standby after idle timeout
Lowell Gilbert [EMAIL PROTECTED] writes: mike mcgranahan [EMAIL PROTECTED] writes: thank you for your reply. correct me if i'm wrong, but apmd only responds to apm signals sent to it, either by the user or by the machine hardware (lid closing or opening). That looks correct. It should be possible to hack a screensaver to send such an event; if my kid gives me enough time this week, I'll take a crack at it. It definitely works; replacing the apm_display() call in apm_saver() in src/sys/modules/syscons/apm/apm_saver.c with: if (blank) apm_suspend(PMST_SUSPEND); sc_touch_scrn_saver(); will suspend the system when the screen saver kicks in. It won't work in X, though, because the screensaver gets disabled by the video card change to graphics mode. So it's only a hack, but I'll still probably try wrapping it in a sysctl and submitting it as a PR. I'll have to figure out more of the implementation of the saver-module infrastructure to do this properly; any hints would be appreciated. [It's not that this really *should* be connected to screen savers, just that detecting inactivity is the part that I don't have a good way to do independently.] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: automatic standby after idle timeout
mike mcgranahan [EMAIL PROTECTED] writes: thank you for your reply. correct me if i'm wrong, but apmd only responds to apm signals sent to it, either by the user or by the machine hardware (lid closing or opening). That looks correct. It should be possible to hack a screensaver to send such an event; if my kid gives me enough time this week, I'll take a crack at it. also, can anyone describe the apm_saver.ko KLD? i can't seem to find a description of it anywhere. It turns off the screen. ahh, thanks. green_saver also turns off the screen (dpms). are there any differences between apm_saver and green_saver? They use different API, as far as I can see. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: automatic standby after idle timeout
--- Lowell Gilbert [EMAIL PROTECTED] wrote: mike mcgranahan [EMAIL PROTECTED] writes: under windows it is possible to configure the system to enter APM standby after a certain amount of system inactivity. in linux their is a program called sleepd which will initiate an APM standby after a configurable period of system inactivity, which works both on the console as well as while X is running. is there any way to achieve the same effect under freebsd, where the system will enter standby after, say, 10 minutes of no activity? apmd(8) is the closest thing I know of. I don't know all of the new power-control functions in 5.x, but I wouldn't recommend that for you anyway. thank you for your reply. correct me if i'm wrong, but apmd only responds to apm signals sent to it, either by the user or by the machine hardware (lid closing or opening). also, can anyone describe the apm_saver.ko KLD? i can't seem to find a description of it anywhere. It turns off the screen. ahh, thanks. green_saver also turns off the screen (dpms). are there any differences between apm_saver and green_saver? thank you again. mike __ Do you Yahoo!? Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop! http://platinum.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: automatic standby after idle timeout
--- David Fleck [EMAIL PROTECTED] wrote: On Fri, 21 Mar 2003, mike mcgranahan wrote: under windows it is possible to configure the system to enter APM standby after a certain amount of system inactivity. in linux their is a program called sleepd which will initiate an APM standby after a configurable period of system inactivity, which works both on the console as well as while X is running. is there any way to achieve the same effect under freebsd, where the system will enter standby after, say, 10 minutes of no activity? try 'man xset'. grep for the dpms options. In my AfterStep configuration, I use xset dpms 600 1200 1800 to set standby (10 min) suspend (20 min) and off (30 min) times. thanks for the info. i do use xset for controlling dpms in X, but i am interested in something that will a) put the system into standby, not just the monitor, and b) work regardless of X running. any other suggestions or ideas? i'm finally switching from windows to unix full-time, so i am stuck choosing between freebsd and linux (gentoo). i really like freebsd's integration, configuration, documentation and ports system, but auto-standby is important to me. thie absence of this feature seems to me to be a significant, though not vital, omission--particularly useful in computer labs. is anyone aware of a more general daemon or facility that can execute a command after a certain period of system idleness... perhaps some modified cron? -- David Fleck [EMAIL PROTECTED] thanks again, mike __ Do you Yahoo!? Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop! http://platinum.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: automatic standby after idle timeout
On Sun, 23 Mar 2003, mike mcgranahan wrote: thanks for the info. i do use xset for controlling dpms in X, but i am interested in something that will a) put the system into standby, not just the monitor, and b) work regardless of X running. any other suggestions or ideas? i'm finally switching from windows to unix full-time, so i am stuck choosing between freebsd and linux (gentoo). i really like freebsd's integration, configuration, documentation and ports system, but auto-standby is important to me. thie absence of this feature seems to me to be a significant, though not vital, omission--particularly useful in computer labs. is anyone aware of a more general daemon or facility that can execute a command after a certain period of system idleness... perhaps some modified cron? I'm not sure what is involved in putting the *system* into standby, as compared to just the monitor - Linux distros usually provide a utility called 'hdparm' to set spin-down and sleep times for IDE drives, don't know if theres a SCSI equivalent. I haven't found a similar utility in FreeBSD - possibly one of the tunables mentioned in 'man ata' or 'man tuning' would do it, I haven't looked very hard. -- David Fleck [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: automatic standby after idle timeout
mike mcgranahan [EMAIL PROTECTED] writes: under windows it is possible to configure the system to enter APM standby after a certain amount of system inactivity. in linux their is a program called sleepd which will initiate an APM standby after a configurable period of system inactivity, which works both on the console as well as while X is running. is there any way to achieve the same effect under freebsd, where the system will enter standby after, say, 10 minutes of no activity? apmd(8) is the closest thing I know of. I don't know all of the new power-control functions in 5.x, but I wouldn't recommend that for you anyway. also, can anyone describe the apm_saver.ko KLD? i can't seem to find a description of it anywhere. It turns off the screen. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: automatic standby after idle timeout
On Fri, 21 Mar 2003, mike mcgranahan wrote: under windows it is possible to configure the system to enter APM standby after a certain amount of system inactivity. in linux their is a program called sleepd which will initiate an APM standby after a configurable period of system inactivity, which works both on the console as well as while X is running. is there any way to achieve the same effect under freebsd, where the system will enter standby after, say, 10 minutes of no activity? try 'man xset'. grep for the dpms options. In my AfterStep configuration, I use xset dpms 600 1200 1800 to set standby (10 min) suspend (20 min) and off (30 min) times. -- David Fleck [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
automatic standby after idle timeout
hello, under windows it is possible to configure the system to enter APM standby after a certain amount of system inactivity. in linux their is a program called sleepd which will initiate an APM standby after a configurable period of system inactivity, which works both on the console as well as while X is running. is there any way to achieve the same effect under freebsd, where the system will enter standby after, say, 10 minutes of no activity? also, can anyone describe the apm_saver.ko KLD? i can't seem to find a description of it anywhere. thank you for your help. mike __ Do you Yahoo!? Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop! http://platinum.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
APM standby freeze the PC
Hi, I have this configuration: MoBo MSI KT4 Ultra CPU Athlon XP 2400+ Matrox G450 I'd like to keep my computer in standby when I don't use it , but if I give the command : apm -Z in the console appears : ata0: resetting devices... And the system locks up . The Suspend mode works perfectly. On linux the standby works too. My IDE configuration (if this can be of any help ) IDE0: Master: Maxtor 60GB ATA133 Slave: Nec DV5800 DVD Reader IDE1: Master: Quantum Fireball 30GB ATA100 Slave: HP CD-Writer Plus 8100 Thanks for UR help Bye __ Yahoo! Cellulari: loghi, suonerie, picture message per il tuo telefonino http://it.yahoo.com/mail_it/foot/?http://it.mobile.yahoo.com/index2002.html To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Monitor standby + gnome 2.2 and XFree86-4.2.0
I upgraded from Gnome 1.x and XFree86-3.x to Gnome 2.2 and XFree86-4.2.0 (latest versions of ports) and monitor-standby with xscreensaver stopped working. Under the previous setup, I could set a time for the monitor to go into standby mode, and it would. Now, I set the time, but it never goes into standby. xscreensaver works otherwise, just no standby. I did a google search and saw references to a bug involving DPMS in a Redhat forum, but I didn't quite understand it. Anyone have any suggestions to get it working, or where I might inquire or look? Thanks! -- Mark Edwards San Francisco, CA To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message