8474884.2BSD 2048 16384 28528
> >>
> >>My opinion is:
> >>bsdlabel -B mfid0s1
> >
> >What has this all got to do with the Subject?
> > Subject: Re: Using Serial Port Other Than sio0 for the Console
> >
> >Please don't hijack threa
?
Subject: Re: Using Serial Port Other Than sio0 for the Console
Please don't hijack threads.
Start a new one if you have something to ask.
In the article 26.6.5.2. in the handbook you will find the answer. If
you want to use another sio port (COM2 im my case) for serial
communications you ne
My opinion is:
> bsdlabel -B mfid0s1
What has this all got to do with the Subject?
Subject: Re: Using Serial Port Other Than sio0 for the Console
Please don't hijack threads.
Start a new one if you have something to ask.
jerry
>
> Is that correct?
>
> Regards,
>
Hello Tim
I did what in the handbook under article 26.6.5.2. is described but not shure
how I can write a new boot block to the disk. Here is what I think is correct:
Output from df and bsdlabel mfid0s1:
# df -h
Filesystem SizeUsed Avail Capacity Mounted on
/dev/mfid0s1a989M
Hello Tim
Probably I find the problem. I did not read care enough the article 26.6.5.2.
I will try it asap (in the next few days). I will keep you updated.
Regards,
Am Sat, Jan 31, 2009 at 12:09:28PM -0700 Tim Judd schrieb:
> On Fri, Jan 30, 2009 at 10:28 AM, Martin Schweizer > wrote:
>
> >
On Fri, Jan 30, 2009 at 10:28 AM, Martin Schweizer wrote:
> Hello
>
> I want to use sio1 for console access. I read chapter 26.6 in the handbook
> and did the following:
>
> /boot.config:
> -P
>
> /boot/device.hints:
> [snip]
> hint.sio.0.at="isa"
> hint.sio.0.port="0x3F8"
> ### hint.sio.0.flags=
Hello
I want to use sio1 for console access. I read chapter 26.6 in the handbook and
did the following:
/boot.config:
-P
/boot/device.hints:
[snip]
hint.sio.0.at="isa"
hint.sio.0.port="0x3F8"
### hint.sio.0.flags="0x10"
hint.sio.0.irq="4"
hint.sio.1.at="isa"
hint.sio.1.port="0x2F8"
hint.sio.1.f
