Re: WRITE_DMA failure during install of 5.2.1-RELEASE
Hello Chuck, well I tried hutils diagnostics utility from samsung site, which showed up errors (both during selftest or low level format), then I took the hard drive and put it into another computer, where I was able to run both diagnostics and low lever format successfully without any errors. I took also Western Digital drive and put it into failing computer, again it was new drive and I went to same errors during diagnostics from WD utilities.. So I assume that something on mainboard (probably disk controller) is failing so I will make a complaint to supplier of hardware :) Thank you.. Cheers, Martin On Sat, Apr 10, 2004 at 03:12:37PM -0400 or thereabouts, Chuck Swiger wrote: > Looks like the hard drive is failing. You ought to try running a > diagnostic scan on it (look for a utility from the vendor's website)... -- =-- : :. kind regards :.. Martin Hudec :.: :.: :m: +421.907.303393 :.: :@: [EMAIL PROTECTED] :.: :w: http://www.aeternal.net ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: WRITE_DMA failure during install of 5.2.1-RELEASE
Martin Hudec wrote: I am seeing following error during instalation of base system to / as: ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=2305439 ad0: FAILURE - WRITE_DMA status=51 error=84 LBA=2305439 Looks like the hard drive is failing. You ought to try running a diagnostic scan on it (look for a utility from the vendor's website)... -- -Chuck ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
WRITE_DMA failure during install of 5.2.1-RELEASE
Hello, I am seeing following error during instalation of base system to / as: ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=2305439 ad0: FAILURE - WRITE_DMA status=51 error=84 LBA=2305439 System being installed is: FreeBSD 5.2.1-RELEASE Hardware is: Athlon XP2200+, 256MB DDR333 RAM, 80GB Samsung harddrive, ASRock K7S8XE mainboard (SiS748 chipset) with SAMSUNG DVD-ROM. Can anyone tell me what's wrong? Cheers, Martin -- =-- : :. kind regards :.. Martin Hudec :.: :.: :m: +421.907.303393 :.: :@: [EMAIL PROTECTED] :.: :w: http://www.aeternal.net ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
