Hello All,
This morning I have seen the following log message on my FreeBSD 4.7 server.
ad2: READ command timeout tag=0 serv=0 - resetting
ata1: resetting devices .. ad2: DMA limited to UDMA33, non-ATA66 cable or device
done.
I would really appreciate if someone could tell me the cause
, 2004 12:48 PM
To: [EMAIL PROTECTED]
Subject: ata1: resetting devices ...
Hello All,
This morning I have seen the following log message on my FreeBSD 4.7
server.
ad2: READ command timeout tag=0 serv=0 - resetting
ata1: resetting devices .. ad2: DMA limited to UDMA33, non-ATA66
cable or device
done
devices ...
Hello All,
This morning I have seen the following log message on my FreeBSD 4.7
server.
ad2: READ command timeout tag=0 serv=0 - resetting
ata1: resetting devices .. ad2: DMA limited to UDMA33, non-ATA66
cable or device
done.
I would really appreciate if someone could tell me
- resetting
ata1: resetting devices .. ad2: DMA limited to UDMA33, non-ATA66
cable or device
Thanks,
Naveen.
JJB [EMAIL PROTECTED] wrote:
These means that you have a mismatch between the devices and the
ribbon connecting them to your motherboard. Most common cause is a
UDMA66 hard drive plugged
PROTECTED]
Sent: Wednesday, July 28, 2004 2:13 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: RE: ata1: resetting devices ...
Hi,
Thanks for the reply.
Yes, i do have two hard drives in my server. I am not sure about their
speeds. Could you please give me the solution if the problem
On Wed, 28 Jul 2004 09:48:02 -0700 (PDT)
samy lancher [EMAIL PROTECTED] wrote:
Hello All,
This morning I have seen the following log message on my FreeBSD 4.7
server.
ad2: READ command timeout tag=0 serv=0 - resetting
ata1: resetting devices .. ad2: DMA limited to UDMA33, non-ATA66
the ATA66 ribbon on IDE2 with a ATA33 ribbon.
-Original Message-
From: samy lancher [mailto:[EMAIL PROTECTED]
Sent: Wednesday, July 28, 2004 2:36 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: RE: ata1: resetting devices ...
These are the messages from dmesg
ad0: 76345MB MAXTOR
of
this problem by replacing the ATA66 ribbon on IDE2 with a ATA33 ribbon.
-Original Message-
From: samy lancher [mailto:[EMAIL PROTECTED]
Sent: Wednesday, July 28, 2004 2:36 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: RE: ata1: resetting devices ...
These are the messages from dmesg
