Re: atacontrol + highpoint raid hot-swappable bays = reboot?
--- On Fri, 1/30/09, Gabe n...@att.net wrote: From: Gabe n...@att.net Subject: atacontrol + highpoint raid hot-swappable bays = reboot? To: freebsd-questions@freebsd.org Date: Friday, January 30, 2009, 2:40 AM Hello list, I've come upon a problem I've googled the daylights out of, further I've read atacontrol(8) up and down without success. My goal is simple, I have a supermicro 1U with hot-swappable drive bays which hold 2 SATA drives that are connected to a PCI highpoint rocket raid card. I need to be able to simulate a failure on HDD1 (drive bay 2) and I've been trying to do it by following the handbook here: [18.4.3] http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/raid.html to no avail. atacontrol detach ata3 pull drive out wait some time put drive in atacontrol attach ata3 HDD is recognized and listed in 'list' command atacontrol addspare ar0 ata3 Now this is when I encounter a Device Busy error. In order to recover from this I've tried detaching and attaching to no avail, rebooting just makes atacontrol status ar0 only show disk 1 even though disk 2 (ata3) is listed in atacontrol list. See below for a transcript from the shell, hopefully someone can provide some insight before I flip out. :) Thanks, /gabe atap...@pci0:1:3:0: class=0x010400 card=0x00011103 chip=0x00051103 rev=0x02 hdr=0x00 vendor = 'Triones Technologies Inc. (HighPoint)' device = 'HPT372x UDMA/ATA133 RAID Controller' class = mass storage subclass = RAID Jan 30 02:19:00 amnesiac kernel: hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27) Jan 30 02:19:00 amnesiac kernel: ar0: 76319MB HighPoint v2 RocketRAID RAID1 status: READY Script started on Fri Jan 30 02:21:01 2009 amnesiac# atacontrol list ATA channel 0: Master: no device present Slave: no device present ATA channel 1: Master: acd0 CD-224E/1.9A ATA/ATAPI revision 0 Slave: no device present ATA channel 2: Master: ad4 ST380817AS/3.42 Serial ATA v1.0 Slave: no device present ATA channel 3: Master: ad6 ST380817AS/3.42 Serial ATA v1.0 Slave: no device present amnesiac# atacontrol status ar0 ar0: ATA RAID1 status: READY subdisks: 0 ad6 ONLINE 1 ad4 ONLINE amnesiac# atacontrol detach ata2 amnesiac# tail -n5 /var/log/messages Jan 30 02:19:00 amnesiac savecore: no dumps found Jan 30 02:19:39 amnesiac login: ROOT LOGIN (root) ON ttyv0 Jan 30 02:21:38 amnesiac kernel: ar0: WARNING - mirror protection lost. RAID1 array in DEGRADED mode Jan 30 02:21:38 amnesiac kernel: subdisk4: detached Jan 30 02:21:38 amnesiac kernel: ad4: detached amnesiac# atacontrol attach ata2 Master: ad4 ST380817AS/3.42 Serial ATA v1.0 Slave: no device present amnesiac# atacontrol status ar0 ar0: ATA RAID1 status: DEGRADED subdisks: 0 ad6 ONLINE 1 MISSING amnesiac# atacontrol list ATA channel 0: Master: no device present Slave: no device present ATA channel 1: Master: acd0 CD-224E/1.9A ATA/ATAPI revision 0 Slave: no device present ATA channel 2: Master: ad4 ST380817AS/3.42 Serial ATA v1.0 Slave: no device present ATA channel 3: Master: ad6 ST380817AS/3.42 Serial ATA v1.0 Slave: no device present amnesiac# atacontrol addspare ar0 ad4 atacontrol: ioctl(IOCATARAIDADDSPARE): Device busy amnesiac# ^Dexit Script done on Fri Jan 30 02:22:47 2009 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org Oh man, so we're all stumped? Any suggestions would be greatly appreciated. Thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
atacontrol + highpoint raid hot-swappable bays = reboot?
Hello list, I've come upon a problem I've googled the daylights out of, further I've read atacontrol(8) up and down without success. My goal is simple, I have a supermicro 1U with hot-swappable drive bays which hold 2 SATA drives that are connected to a PCI highpoint rocket raid card. I need to be able to simulate a failure on HDD1 (drive bay 2) and I've been trying to do it by following the handbook here: [18.4.3] http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/raid.html to no avail. atacontrol detach ata3 pull drive out wait some time put drive in atacontrol attach ata3 HDD is recognized and listed in 'list' command atacontrol addspare ar0 ata3 Now this is when I encounter a Device Busy error. In order to recover from this I've tried detaching and attaching to no avail, rebooting just makes atacontrol status ar0 only show disk 1 even though disk 2 (ata3) is listed in atacontrol list. See below for a transcript from the shell, hopefully someone can provide some insight before I flip out. :) Thanks, /gabe atap...@pci0:1:3:0: class=0x010400 card=0x00011103 chip=0x00051103 rev=0x02 hdr=0x00 vendor = 'Triones Technologies Inc. (HighPoint)' device = 'HPT372x UDMA/ATA133 RAID Controller' class = mass storage subclass = RAID Jan 30 02:19:00 amnesiac kernel: hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27) Jan 30 02:19:00 amnesiac kernel: ar0: 76319MB HighPoint v2 RocketRAID RAID1 status: READY Script started on Fri Jan 30 02:21:01 2009 amnesiac# atacontrol list ATA channel 0: Master: no device present Slave: no device present ATA channel 1: Master: acd0 CD-224E/1.9A ATA/ATAPI revision 0 Slave: no device present ATA channel 2: Master: ad4 ST380817AS/3.42 Serial ATA v1.0 Slave: no device present ATA channel 3: Master: ad6 ST380817AS/3.42 Serial ATA v1.0 Slave: no device present amnesiac# atacontrol status ar0 ar0: ATA RAID1 status: READY subdisks: 0 ad6 ONLINE 1 ad4 ONLINE amnesiac# atacontrol detach ata2 amnesiac# tail -n5 /var/log/messages Jan 30 02:19:00 amnesiac savecore: no dumps found Jan 30 02:19:39 amnesiac login: ROOT LOGIN (root) ON ttyv0 Jan 30 02:21:38 amnesiac kernel: ar0: WARNING - mirror protection lost. RAID1 array in DEGRADED mode Jan 30 02:21:38 amnesiac kernel: subdisk4: detached Jan 30 02:21:38 amnesiac kernel: ad4: detached amnesiac# atacontrol attach ata2 Master: ad4 ST380817AS/3.42 Serial ATA v1.0 Slave: no device present amnesiac# atacontrol status ar0 ar0: ATA RAID1 status: DEGRADED subdisks: 0 ad6 ONLINE 1 MISSING amnesiac# atacontrol list ATA channel 0: Master: no device present Slave: no device present ATA channel 1: Master: acd0 CD-224E/1.9A ATA/ATAPI revision 0 Slave: no device present ATA channel 2: Master: ad4 ST380817AS/3.42 Serial ATA v1.0 Slave: no device present ATA channel 3: Master: ad6 ST380817AS/3.42 Serial ATA v1.0 Slave: no device present amnesiac# atacontrol addspare ar0 ad4 atacontrol: ioctl(IOCATARAIDADDSPARE): Device busy amnesiac# ^Dexit Script done on Fri Jan 30 02:22:47 2009 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
atacontrol + highpoint raid hot-swappable bays = reboot?
Hello list, I've come upon a problem I've googled the daylights out of, further I've read atacontrol(8) up and down without success. My goal is simple, I have a supermicro 1U with hot-swappable drive bays which hold 2 SATA drives that are connected to a PCI highpoint rocket raid card. I need to be able to simulate a failure on HDD1 (drive bay 2) and I've been trying to do it by following the handbook here: [18.4.3] http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/raid.html to no avail. atacontrol detach ata3 pull drive out wait some time put drive in atacontrol attach ata3 HDD is recognized and listed in 'list' command atacontrol addspare ar0 ata3 Now this is when I encounter a Device Busy error. In order to recover from this I've tried detaching and attaching to no avail, rebooting just makes atacontrol status ar0 only show disk 1 even though disk 2 (ata3) is listed in atacontrol list. See below for a transcript from the shell, hopefully someone can provide some insight before I flip out. :) Thanks, /gabe atap...@pci0:1:3:0: class=0x010400 card=0x00011103 chip=0x00051103 rev=0x02 hdr=0x00 vendor = 'Triones Technologies Inc. (HighPoint)' device = 'HPT372x UDMA/ATA133 RAID Controller' class = mass storage subclass = RAID Jan 30 02:19:00 amnesiac kernel: hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27) Jan 30 02:19:00 amnesiac kernel: ar0: 76319MB HighPoint v2 RocketRAID RAID1 status: READY Script started on Fri Jan 30 02:21:01 2009 amnesiac# atacontrol list ATA channel 0: Master: no device present Slave: no device present ATA channel 1: Master: acd0 CD-224E/1.9A ATA/ATAPI revision 0 Slave: no device present ATA channel 2: Master: ad4 ST380817AS/3.42 Serial ATA v1.0 Slave: no device present ATA channel 3: Master: ad6 ST380817AS/3.42 Serial ATA v1.0 Slave: no device present amnesiac# atacontrol status ar0 ar0: ATA RAID1 status: READY subdisks: 0 ad6 ONLINE 1 ad4 ONLINE amnesiac# atacontrol detach ata2 amnesiac# tail -n5 /var/log/messages Jan 30 02:19:00 amnesiac savecore: no dumps found Jan 30 02:19:39 amnesiac login: ROOT LOGIN (root) ON ttyv0 Jan 30 02:21:38 amnesiac kernel: ar0: WARNING - mirror protection lost. RAID1 array in DEGRADED mode Jan 30 02:21:38 amnesiac kernel: subdisk4: detached Jan 30 02:21:38 amnesiac kernel: ad4: detached amnesiac# atacontrol attach ata2 Master: ad4 ST380817AS/3.42 Serial ATA v1.0 Slave: no device present amnesiac# atacontrol status ar0 ar0: ATA RAID1 status: DEGRADED subdisks: 0 ad6 ONLINE 1 MISSING amnesiac# atacontrol list ATA channel 0: Master: no device present Slave: no device present ATA channel 1: Master: acd0 CD-224E/1.9A ATA/ATAPI revision 0 Slave: no device present ATA channel 2: Master: ad4 ST380817AS/3.42 Serial ATA v1.0 Slave: no device present ATA channel 3: Master: ad6 ST380817AS/3.42 Serial ATA v1.0 Slave: no device present amnesiac# atacontrol addspare ar0 ad4 atacontrol: ioctl(IOCATARAIDADDSPARE): Device busy amnesiac# ^Dexit Script done on Fri Jan 30 02:22:47 2009 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
