Try setting the pnpos option in your bios to no.
My laptop's intel NIC doesn't get detected otherwise.
Cheers,
Han
http://www.argosy.ca/~hhw
- Original Message -
From: michal novacek [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, July 06, 2003 1:31 PM
Subject: intel etherexpress pro/10 not probed
hi,
i got intel etherexpress pro/10 combo card, which i got from old server,
but i can't get it probed in my home computer. i guess it's not the hw
prblem of the card because the link light switches on when i plug tp cable
in it.
during boot, i got the following:
...
atapci0: Intel PIIX3 ATA controller port 0xffa0-0xffaf at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: serial bus, USB at device 7.2 (no driver attached)
pci0: display, VGA at device 10.0 (no driver attached)
pci0: multimedia, audio at device 11.0 (no driver attached)
pci0: input device at device 11.1 (no driver attached)
pci0: network, ethernet at device 12.0 (no driver attached)
# ^^this is it
ahc0: Adaptec 2940 Ultra SCSI adapter port 0xec00-0xecff mem 0xffafb000-
0xffafbfff irq 10 at device 13.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
rl0: RealTek 8139 10/100BaseTX port 0xe800-0xe8ff mem 0xffafaf00-
0xffafafff irq 11 at device 14.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect
mode
rl0: Ethernet address: 00:08:a1:24:80:60
miibus0: MII bus on rl0
rlphy0: RealTek internal media interface on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
...
[EMAIL PROTECTED] boot]# pciconf -vl
...
[EMAIL PROTECTED]:12:0:class=0x02 card=0x chip=0x12268086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82596 EtherExpress PRO/10'
class= network
subclass = ethernet
...
it seems to me, that everything is ok, bot i can't figure out how to make
the system load the appropriate driver. from hardware notes, i suppose
that
the driver (module)should be ex -- even man 4 ex lists this card, but i do
not have this module in /boot/kernel/ and compiling it into kernel doesn't
change anything (it's still not detected :-{) i'm using freebsd 5.0-
release.
thanx for any opinions.
--m
--
[ [EMAIL PROTECTED] ] [ [EMAIL PROTECTED] ] [ [EMAIL PROTECTED] ]
Unix is user friendly. It's just selective about who its friend are.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]