Re: problem of install 7.0 on notebook

2007-11-09 Thread Zhang hw
7.0-beta2-amd64's boot stop at the same place as beta1.5.

2007/11/3, Zhang hw [EMAIL PROTECTED]:
 Thank you, David!
 The verbose logging messages:
 ---
 pcib2: ACPI PCI-PCI bridge at device 4.0 on pci0
 pcib2: domain 0
 pcib2: secondary bus 16
 pcib2: subordinate bus 16
 pcib2: I/O decode 0xf000-0xfff
 pcib2: memory decode 0xcc00-0xcc0f
 pcib2: no prefetched decode
 pcib2: could not get PCI interrupt routing table for \_SB_.C08B.C24F -
 AE_NOT_FOUND
 pci16: ACPI PCI bus on pcib2
 pci16: domain=0, physical bus=16
 found- vendor=0x14e4, dev=0x1693, revid=0x02
 domain=0, bus=16, slot=0, func=0
 class=02-00-00, hdrtype=0x00, mfdev=0
 cmdreg=0x0006, statreg=0x0010, cachelnsz=16, (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=a, irq=10
 powerspec 3 supports D0 D3 current D0
 MSI supports 1 message, 64 bit
 map[10]: type Memory, range 64, base 0xcc00, size
 16, enabled
 pcib2: requested memory range 0xcc00-0xcc00: good
 pcib0: matched entry for 0.4.INTA
 pcib0: slot 4 INTA hardwired to IRQ16
 pcib2: slot 0 INTA is routed to irq 16
 --
 This is the last screen shown, and I write it here handy.

 2007/11/2, David Yeske [EMAIL PROTECTED]:
  On 11/2/07, Zhang hw [EMAIL PROTECTED] wrote:
   I have now could work on my notebook with freebsd 6.2-release and
   6.3-prerelease, but there are still some problems such as acpi. So I
   want to have a try of freebsd 7.0-beta-1.5, but I can't install it,
   the boot process stop at pci probing:
   pcib2:PCI-PCI brige at device 4.0 on pci0
   pci16:PCI-PCI bus on pcib2
   if acpi enable, it maybe show as:
   pcib2:ACPI PCI-PCI brige...
   pci16:ACPI...
   my cpu is athlon 64x2, I've tried both amd64 and i386 versions.
   Help!
   ___
   freebsd-questions@freebsd.org mailing list
   http://lists.freebsd.org/mailman/listinfo/freebsd-questions
   To unsubscribe, send any mail to [EMAIL PROTECTED]
  
 
  What happens if you boot verbose?  That might better indicate where
  the kernel is hanging.
 

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]


Re: problem of install 7.0 on notebook

2007-11-03 Thread Zhang hw
Thank you, David!
The verbose logging messages:
---
pcib2: ACPI PCI-PCI bridge at device 4.0 on pci0
pcib2: domain 0
pcib2: secondary bus 16
pcib2: subordinate bus 16
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xcc00-0xcc0f
pcib2: no prefetched decode
pcib2: could not get PCI interrupt routing table for \_SB_.C08B.C24F -
AE_NOT_FOUND
pci16: ACPI PCI bus on pcib2
pci16: domain=0, physical bus=16
found- vendor=0x14e4, dev=0x1693, revid=0x02
domain=0, bus=16, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16, (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xcc00, size
16, enabled
pcib2: requested memory range 0xcc00-0xcc00: good
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ16
pcib2: slot 0 INTA is routed to irq 16
--
This is the last screen shown, and I write it here handy.

2007/11/2, David Yeske [EMAIL PROTECTED]:
 On 11/2/07, Zhang hw [EMAIL PROTECTED] wrote:
  I have now could work on my notebook with freebsd 6.2-release and
  6.3-prerelease, but there are still some problems such as acpi. So I
  want to have a try of freebsd 7.0-beta-1.5, but I can't install it,
  the boot process stop at pci probing:
  pcib2:PCI-PCI brige at device 4.0 on pci0
  pci16:PCI-PCI bus on pcib2
  if acpi enable, it maybe show as:
  pcib2:ACPI PCI-PCI brige...
  pci16:ACPI...
  my cpu is athlon 64x2, I've tried both amd64 and i386 versions.
  Help!
  ___
  freebsd-questions@freebsd.org mailing list
  http://lists.freebsd.org/mailman/listinfo/freebsd-questions
  To unsubscribe, send any mail to [EMAIL PROTECTED]
 

 What happens if you boot verbose?  That might better indicate where
 the kernel is hanging.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]


Re: problem of install 7.0 on notebook

2007-11-02 Thread Jonathan Horne

Quoting Jonathan Horne [EMAIL PROTECTED]:


Quoting David Yeske [EMAIL PROTECTED]:


On 11/2/07, Zhang hw [EMAIL PROTECTED] wrote:

I have now could work on my notebook with freebsd 6.2-release and
6.3-prerelease, but there are still some problems such as acpi. So I
want to have a try of freebsd 7.0-beta-1.5, but I can't install it,
the boot process stop at pci probing:
pcib2:PCI-PCI brige at device 4.0 on pci0
pci16:PCI-PCI bus on pcib2
if acpi enable, it maybe show as:
pcib2:ACPI PCI-PCI brige...
pci16:ACPI...
my cpu is athlon 64x2, I've tried both amd64 and i386 versions.
Help!
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to   
[EMAIL PROTECTED]




What happens if you boot verbose?  That might better indicate where
the kernel is hanging.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]



without the -j, this appears to be wherei am hanging up:

uipc_syscalls.o(.text+0x3c1): In function `sctp_generic_recvmsg':
/usr/src/sys/kern/uipc_syscalls.c:2600: undefined reference to
`sctp_sorecvmsg'
uipc_syscalls.o(.text+0x21a2): In function `sctp_generic_sendmsg_iov':
/usr/src/sys/kern/uipc_syscalls.c:2478: undefined reference to
`sctp_lower_sosend'
uipc_syscalls.o(.text+0x249d): In function `sctp_generic_sendmsg':
/usr/src/sys/kern/uipc_syscalls.c:2371: undefined reference to
`sctp_lower_sosend'
uipc_syscalls.o(.text+0x266c): In function `sctp_peeloff':
/usr/src/sys/kern/uipc_syscalls.c:2238: undefined reference to
`sctp_can_peel_off'
uipc_syscalls.o(.text+0x28e6):/usr/src/sys/kern/uipc_syscalls.c:2279:
undefined reference to `sctp_do_peeloff'
rtsock.o(.text+0xb7d): In function `rt_newaddrmsg':
/usr/src/sys/net/rtsock.c:897: undefined reference to `sctp_addr_change'
in_proto.o(.data+0xa8): undefined reference to `sctp_input'
in_proto.o(.data+0xb0): undefined reference to `sctp_ctlinput'
in_proto.o(.data+0xb4): undefined reference to `sctp_ctloutput'
in_proto.o(.data+0xbc): undefined reference to `sctp_init'
in_proto.o(.data+0xc8): undefined reference to `sctp_drain'
in_proto.o(.data+0xcc): undefined reference to `sctp_usrreqs'
in_proto.o(.data+0xdc): undefined reference to `sctp_input'
in_proto.o(.data+0xe4): undefined reference to `sctp_ctlinput'
in_proto.o(.data+0xe8): undefined reference to `sctp_ctloutput'
in_proto.o(.data+0xfc): undefined reference to `sctp_drain'
in_proto.o(.data+0x100): undefined reference to `sctp_usrreqs'
in_proto.o(.data+0x110): undefined reference to `sctp_input'
in_proto.o(.data+0x118): undefined reference to `sctp_ctlinput'
in_proto.o(.data+0x11c): undefined reference to `sctp_ctloutput'
in_proto.o(.data+0x130): undefined reference to `sctp_drain'
in_proto.o(.data+0x134): undefined reference to `sctp_usrreqs'
*** Error code 1

Stop in /usr/obj/usr/src/sys/HPDC7100.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.

--
Jonathan Horne
http://dfwlpiki.dfwlp.org
[EMAIL PROTECTED]


my apologies all, the above reply did not pertain to this thread.   
please exuse me while i finish the rest of my coffee!!

--
Jonathan Horne
http://dfwlpiki.dfwlp.org
[EMAIL PROTECTED]


This message was sent using IMP, the Internet Messaging Program.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]


Re: problem of install 7.0 on notebook

2007-11-02 Thread Jonathan Horne

Quoting David Yeske [EMAIL PROTECTED]:


On 11/2/07, Zhang hw [EMAIL PROTECTED] wrote:

I have now could work on my notebook with freebsd 6.2-release and
6.3-prerelease, but there are still some problems such as acpi. So I
want to have a try of freebsd 7.0-beta-1.5, but I can't install it,
the boot process stop at pci probing:
pcib2:PCI-PCI brige at device 4.0 on pci0
pci16:PCI-PCI bus on pcib2
if acpi enable, it maybe show as:
pcib2:ACPI PCI-PCI brige...
pci16:ACPI...
my cpu is athlon 64x2, I've tried both amd64 and i386 versions.
Help!
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]



What happens if you boot verbose?  That might better indicate where
the kernel is hanging.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]



without the -j, this appears to be wherei am hanging up:

uipc_syscalls.o(.text+0x3c1): In function `sctp_generic_recvmsg':
/usr/src/sys/kern/uipc_syscalls.c:2600: undefined reference to  
`sctp_sorecvmsg'

uipc_syscalls.o(.text+0x21a2): In function `sctp_generic_sendmsg_iov':
/usr/src/sys/kern/uipc_syscalls.c:2478: undefined reference to  
`sctp_lower_sosend'

uipc_syscalls.o(.text+0x249d): In function `sctp_generic_sendmsg':
/usr/src/sys/kern/uipc_syscalls.c:2371: undefined reference to  
`sctp_lower_sosend'

uipc_syscalls.o(.text+0x266c): In function `sctp_peeloff':
/usr/src/sys/kern/uipc_syscalls.c:2238: undefined reference to  
`sctp_can_peel_off'
uipc_syscalls.o(.text+0x28e6):/usr/src/sys/kern/uipc_syscalls.c:2279:  
undefined reference to `sctp_do_peeloff'

rtsock.o(.text+0xb7d): In function `rt_newaddrmsg':
/usr/src/sys/net/rtsock.c:897: undefined reference to `sctp_addr_change'
in_proto.o(.data+0xa8): undefined reference to `sctp_input'
in_proto.o(.data+0xb0): undefined reference to `sctp_ctlinput'
in_proto.o(.data+0xb4): undefined reference to `sctp_ctloutput'
in_proto.o(.data+0xbc): undefined reference to `sctp_init'
in_proto.o(.data+0xc8): undefined reference to `sctp_drain'
in_proto.o(.data+0xcc): undefined reference to `sctp_usrreqs'
in_proto.o(.data+0xdc): undefined reference to `sctp_input'
in_proto.o(.data+0xe4): undefined reference to `sctp_ctlinput'
in_proto.o(.data+0xe8): undefined reference to `sctp_ctloutput'
in_proto.o(.data+0xfc): undefined reference to `sctp_drain'
in_proto.o(.data+0x100): undefined reference to `sctp_usrreqs'
in_proto.o(.data+0x110): undefined reference to `sctp_input'
in_proto.o(.data+0x118): undefined reference to `sctp_ctlinput'
in_proto.o(.data+0x11c): undefined reference to `sctp_ctloutput'
in_proto.o(.data+0x130): undefined reference to `sctp_drain'
in_proto.o(.data+0x134): undefined reference to `sctp_usrreqs'
*** Error code 1

Stop in /usr/obj/usr/src/sys/HPDC7100.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.

--
Jonathan Horne
http://dfwlpiki.dfwlp.org
[EMAIL PROTECTED]


This message was sent using IMP, the Internet Messaging Program.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]


problem of install 7.0 on notebook

2007-11-01 Thread Zhang hw
I have now could work on my notebook with freebsd 6.2-release and
6.3-prerelease, but there are still some problems such as acpi. So I
want to have a try of freebsd 7.0-beta-1.5, but I can't install it,
the boot process stop at pci probing:
pcib2:PCI-PCI brige at device 4.0 on pci0
pci16:PCI-PCI bus on pcib2
if acpi enable, it maybe show as:
pcib2:ACPI PCI-PCI brige...
pci16:ACPI...
my cpu is athlon 64x2, I've tried both amd64 and i386 versions.
Help!
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]


Re: problem of install 7.0 on notebook

2007-11-01 Thread David Yeske
On 11/2/07, Zhang hw [EMAIL PROTECTED] wrote:
 I have now could work on my notebook with freebsd 6.2-release and
 6.3-prerelease, but there are still some problems such as acpi. So I
 want to have a try of freebsd 7.0-beta-1.5, but I can't install it,
 the boot process stop at pci probing:
 pcib2:PCI-PCI brige at device 4.0 on pci0
 pci16:PCI-PCI bus on pcib2
 if acpi enable, it maybe show as:
 pcib2:ACPI PCI-PCI brige...
 pci16:ACPI...
 my cpu is athlon 64x2, I've tried both amd64 and i386 versions.
 Help!
 ___
 freebsd-questions@freebsd.org mailing list
 http://lists.freebsd.org/mailman/listinfo/freebsd-questions
 To unsubscribe, send any mail to [EMAIL PROTECTED]


What happens if you boot verbose?  That might better indicate where
the kernel is hanging.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]