kenneth hatteland wrote:
> After switching from FreeBSD 7.0 release to stable I have had a big
> soundproblem.
> When compiling a kernel as I used to with device sound and device
> snd_emu10Kx as options I now get an error saying mixer is not configured
> etc.And no sound at all. Have tried several mixers to but to no avail,
> I do not understand the problem enough to correct it.
I'm not sure I will either, but maybe won't hurt to try?
> Googling doesn`t help as no one reports the same error with audigy
> soundcards.
> If I compile a kernel without the snd_emu10kx device sound works
> partially, sometimes playing ok, and then often sounding like an alien
> attacking ( digital noise of the horrible kind) Sooner or later the
> system locks down after playing about 5 songs with normal sound forcing
> me to hard switch the system off.. I find this extremely annoying.
I think I would also.
> Does anybody have a clue ? I am not sure which output you`d want me to
> provide for this so instead of pasting every output I know I thought to
> ask first...
> I haven`t reversed my system to 7.0 release so that could maybe fix it,
> but I was hoping to stay with 7.1 :)
Ok Kevin, here we go.....this is from a kernel with only device sound
enabled ( not snd_emu10kx)
[EMAIL PROTECTED] ~]$ dmesg
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 2 2 0 0 0 done
All buffers synced.
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-PRERELEASE #31: Sat Nov 22 10:18:26 CET 2008
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/TERRA
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (2335.98-MHz
K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20000800<SYSCALL,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 4285456384 (4086 MB)
avail memory = 4124061696 (3933 MB)
ACPI APIC Table: <041807 APIC1830>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <041807 RSDT1830> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xbc00-0xbc7f mem
0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 16
at device 0.0 on pci1
uhci0: <UHCI (generic) USB controller> port 0xac00-0xac1f irq 16 at
device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xa880-0xa89f irq 21 at
device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf9fffc00-0xf9ffffff irq
18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0xcc00-0xcc1f mem
0xfe9e0000-0xfe9fffff,0xfe9c0000-0xfe9dffff irq 17 at device 0.0 on pci3
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:1b:21:05:11:fb
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
atapci0: <Marvell ATA controller> port
0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f
mem 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci4
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci5: <ACPI PCI bus> on pcib5
uhci2: <UHCI (generic) USB controller> port 0xa800-0xa81f irq 23 at
device 29.0 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xa480-0xa49f irq 19 at
device 29.1 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xa400-0xa41f irq 18 at
device 29.2 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xa080-0xa09f irq 16 at
device 29.3 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf9fff800-0xf9fffbff irq
23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb3 usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 8 ports with 8 removable, self powered
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pci6: <multimedia, audio> at device 0.0 (no driver attached)
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xe800-0xe8ff mem
0xfebff000-0xfebfffff irq 17 at device 1.0 on pci6
ahc0: [ITHREAD]
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port
0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f
irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH9 SATA300 controller> port
0x9000-0x9007,0x8c00-0x8c03,0x8880-0x8887,0x8800-0x8803,0x8480-0x848f,0x8400-0x840f
irq 19 at device 31.5 on pci0
atapci2: [ITHREAD]
ata6: <ATA channel 0> on atapci2
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci2
ata7: [ITHREAD]
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio0: [FILTER]
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - 98,
should be 8B [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 72a072a0600072a
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad8: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata4-master SATA150
acd0: DVDR <Optiarc DVD RW AD-7200S/1.01> at ata6-master SATA150
Waiting 5 seconds for SCSI devices to settle
da1 at ahc0 bus 0 target 2 lun 0
da1: <COMPAQPC ATLAS10K2-TY184L DDC2> Fixed Direct Access SCSI-3 device
da1: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da1: Command Queueing Enabled
da1: 17366MB (35566000 512 byte sectors: 255H 63S/T 2213C)
da2 at ahc0 bus 0 target 4 lun 0
da2: <NEC DSE2100S 0306> Fixed Direct Access SCSI-2 device
da2: 3.300MB/s transfers
da2: 2014MB (4124736 512 byte sectors: 255H 63S/T 256C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <COMPAQ BD0726536C 3B02> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da0: Command Queueing Enabled
da0: 69464MB (142264000 512 byte sectors: 255H 63S/T 8855C)
da3 at ahc0 bus 0 target 15 lun 0
da3: <FUJITSU MAE3091LP 0112> Fixed Direct Access SCSI-2 device
da3: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da3: Command Queueing Enabled
da3: 8704MB (17826240 512 byte sectors: 255H 63S/T 1109C)
SMP: AP CPU #1 Launched!
cd0 at ata4 bus 0 target 0 lun 0
cd0: <Optiarc DVD RW AD-7200S 1.01> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/da1s1a
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
sblive0: [ITHREAD]
sblive0: <SB Audigy4> port 0xec00-0xec3f irq 16 at device 0.0 on pci6
ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/22.00, addr
2> on uhub1
ums0: 8 buttons and Z dir.
ukbd0: <Logitech Logitech USB Keyboard, class 0/0, rev 1.10/28.00, addr
2> on uhub0
kbd2 at ukbd0
pid 4531 (bumps), uid 1001: exited on signal 11 (core dumped)
pid 6771 (bumps), uid 1001: exited on signal 11 (core dumped)
[EMAIL PROTECTED] ~]$ ls -l /dev/dsp* /dev/mixer
lrwxr-xr-x 1 root wheel 9 Nov 22 10:50 /dev/dsp -> /dev/dsp0
lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp0 ->
/dev/oss/sblive0/pcm0
lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp1 ->
/dev/oss/sblive0/pcm1
lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp2 ->
/dev/oss/sblive0/pcm2
lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp3 ->
/dev/oss/sblive0/pcm3
lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp4 ->
/dev/oss/sblive0/pcm4
lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp5 ->
/dev/oss/sblive0/pcm5
lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp6 ->
/dev/oss/sblive0/pcm6
lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp7 ->
/dev/oss/sblive0/pcm7
lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp8 ->
/dev/oss/sblive0/pcm8
lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp9 ->
/dev/oss/sblive0/pcm9
lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp_ac3 ->
/dev/oss/sblive0/pcm0
lrwxr-xr-x 1 root wheel 8 Nov 22 10:50 /dev/dsp_in -> /dev/dsp
lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp_mmap ->
/dev/oss/sblive0/pcm0
lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp_multich ->
/dev/oss/sblive0/pcm9
lrwxr-xr-x 1 root wheel 21 Nov 22 10:50 /dev/dsp_out ->
/dev/oss/sblive0/pcm0
crw-rw-rw- 1 root wheel 0, 117 Nov 22 10:50 /dev/mixer
[EMAIL PROTECTED] ~]$
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
