Re: upgrading portupgrade
Zbigniew, On Wed, 2 Jul 2008, Zbigniew Szalbot wrote: In order to upgrade portupgrade, is it enough to run make, make install && make clean? If you already have portupgrade installed and tried the above technique I think you'd get an error at the end of make install saying the port is already installed. You'd need to use either make reinstall or make deinstall followed by make reinstall. I've been using portupgrade so long I forget which. I am not familiar with make but something tells me I won't be able to upgrade portupgrade by means of portupgrade ;) I've never had any trouble upgrading portupgrade via portupgrade. Boy, that's almost a tongue twister. :-) If there's a change to portupgrade that would require a special upgrade procedure, it will be noted in /usr/ports/UPDATING. Earlier today I switched my home PC from portupgrade to portupgrade-devel to try out some new features just added to the devel version. All that was involved was: portupgrade -fo ports-mgmt/portupgrade-devel portupgrade Kevin http://www.RawFedDogs.net http://www.WacoAgilityGroup.org Bruceville, TX Si hoc legere scis nimium eruditionis habes. Longum iter est per praecepta, breve et efficax per exempla!!! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: upgrading portupgrade
Hi there, I am not familiar with make but something tells me I won't be able to upgrade portupgrade by means of portupgrade ;) Upgrading portupgrade via portupgrade has always worked for me. Thanks a lot! I should have tried it before writing to the list. It worked very well indeed! -- Zbigniew Szalbot www.LCWords.com smime.p7s Description: S/MIME Cryptographic Signature
Re: upgrading portupgrade
On Wed, Jul 02, 2008 at 08:21:59AM +0200, Zbigniew Szalbot wrote: > Hi there, > > In order to upgrade portupgrade, is it enough to run make, make install > && make clean? > > I am not familiar with make but something tells me I won't be able to > upgrade portupgrade by means of portupgrade ;) > > Thanks! > > -- > Zbigniew Szalbot > www.LCWords.com Upgrading portupgrade via portupgrade has always worked for me. If you're paranoid though, you can always do: cd /usr/ports/ports-mgmt/portupgrade make && make deinstall && make reinstall ...which is the essence of what portupgrade does anyway, minus all the extra stuff ;) frase pgpNwhjmCzSaT.pgp Description: PGP signature
upgrading portupgrade
Hi there, In order to upgrade portupgrade, is it enough to run make, make install && make clean? I am not familiar with make but something tells me I won't be able to upgrade portupgrade by means of portupgrade ;) Thanks! -- Zbigniew Szalbot www.LCWords.com smime.p7s Description: S/MIME Cryptographic Signature
Re: Errors after upgrading portupgrade
Top gives: last pid: 28570; load averages: 0.00, 0.00, 0.00 up 0+02:48:39 10:16:15 94 processes: 2 running, 92 sleeping CPU states: 0.4% user, 0.0% nice, 0.7% system, 0.0% interrupt, 98.9% idle Mem: 23M Active, 40M Inact, 76M Wired, 60K Cache, 60M Buf, 353M Free Swap: 2048M Total, 88M Used, 1960M Free, 4% Inuse I think memory is not the problem. The errors started after the portupgrade to version 2.0.0,1 Jack - Original Message - From: "Scott Smith" <[EMAIL PROTECTED]> To: "Jack Raats" <[EMAIL PROTECTED]> Cc: Sent: Monday, January 02, 2006 9:36 AM Subject: Re: Errors after upgrading portupgrade -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 How's the machine's memory usage? Scott Jack Raats wrote: Hi, Running the new portupgrade 2.0.0,1 gives the following errors: orac# portupgrade -Na [Updating the portsdb in /usr/ports ... - 13945 port entries found .1000.2000.3000.4000.5000.6000.7000.8000.9000.1.11000.12000.13000. . done] ** Package origin of 'bison' has been changed: 'devel/bison' -> 'devel/bison2' ** No need to upgrade 'bison-1.75_2,1' (>= bison-2.1_1). (specify -f to force) /usr/local/lib/ruby/site_ruby/1.8/portsdb.rb:89:in `<<': failed to allocate memory (NoMemoryError) from /usr/local/lib/ruby/site_ruby/1.8/portsdb.rb:89:in `trace' from /usr/local/sbin/portupgrade:723:in `do_upgrade' from /usr/local/sbin/portupgrade:696:in `main' from /usr/local/sbin/portupgrade:693:in `each' from /usr/local/sbin/portupgrade:693:in `main' from /usr/local/sbin/portupgrade:208:in `initialize' from /usr/local/sbin/portupgrade:208:in `new' from /usr/local/sbin/portupgrade:208:in `main' from /usr/local/sbin/portupgrade:1893 Anyone know how to cure this error? Jack ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" - -- [EMAIL PROTECTED] -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (MingW32) iD8DBQFDuOYnKBeC2yZ3EEsRAkItAJ9y7sj6op+L8fFH8VBMNaA5Bu0FeQCfSzPE fz/v1M46YNomG72SmNGTSxE= =1N4B -END PGP SIGNATURE- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Errors after upgrading portupgrade
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 How's the machine's memory usage? Scott Jack Raats wrote: > Hi, > > Running the new portupgrade 2.0.0,1 gives the following errors: > > orac# portupgrade -Na > [Updating the portsdb in /usr/ports ... - 13945 port > entries found > .1000.2000.3000.4000.5000.6000.7000.8000.9000.1.11000.12000.13000. > . done] > ** Package origin of 'bison' has been changed: 'devel/bison' -> 'devel/bison2' > ** No need to upgrade 'bison-1.75_2,1' (>= bison-2.1_1). (specify -f to force) > /usr/local/lib/ruby/site_ruby/1.8/portsdb.rb:89:in `<<': failed to allocate > memory (NoMemoryError) > from /usr/local/lib/ruby/site_ruby/1.8/portsdb.rb:89:in `trace' > from /usr/local/sbin/portupgrade:723:in `do_upgrade' > from /usr/local/sbin/portupgrade:696:in `main' > from /usr/local/sbin/portupgrade:693:in `each' > from /usr/local/sbin/portupgrade:693:in `main' > from /usr/local/sbin/portupgrade:208:in `initialize' > from /usr/local/sbin/portupgrade:208:in `new' > from /usr/local/sbin/portupgrade:208:in `main' > from /usr/local/sbin/portupgrade:1893 > > Anyone know how to cure this error? > > Jack > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" - -- [EMAIL PROTECTED] -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (MingW32) iD8DBQFDuOYnKBeC2yZ3EEsRAkItAJ9y7sj6op+L8fFH8VBMNaA5Bu0FeQCfSzPE fz/v1M46YNomG72SmNGTSxE= =1N4B -END PGP SIGNATURE- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Errors after upgrading portupgrade
Hi, Running the new portupgrade 2.0.0,1 gives the following errors: orac# portupgrade -Na [Updating the portsdb in /usr/ports ... - 13945 port entries found .1000.2000.3000.4000.5000.6000.7000.8000.9000.1.11000.12000.13000. . done] ** Package origin of 'bison' has been changed: 'devel/bison' -> 'devel/bison2' ** No need to upgrade 'bison-1.75_2,1' (>= bison-2.1_1). (specify -f to force) /usr/local/lib/ruby/site_ruby/1.8/portsdb.rb:89:in `<<': failed to allocate memory (NoMemoryError) from /usr/local/lib/ruby/site_ruby/1.8/portsdb.rb:89:in `trace' from /usr/local/sbin/portupgrade:723:in `do_upgrade' from /usr/local/sbin/portupgrade:696:in `main' from /usr/local/sbin/portupgrade:693:in `each' from /usr/local/sbin/portupgrade:693:in `main' from /usr/local/sbin/portupgrade:208:in `initialize' from /usr/local/sbin/portupgrade:208:in `new' from /usr/local/sbin/portupgrade:208:in `main' from /usr/local/sbin/portupgrade:1893 Anyone know how to cure this error? Jack ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
