RE: vgetty Help
Configure Modem to answer call using HAYES Commands ALL external and internal PCI voice modems since they were first developed have been manufactured to comply to the Hayes standard. When you turn on your modem or reset it, your modem loads the active configuration profile into non-volatile memory (NVRAM). The active configuration profile is a group of configuration settings, derived from the values of the modems internal S registers, that define how the modem will operate. The active configuration profile can be either the factory default, or one of two user defined profiles. The first time your modem is turned on, the factory default profile is loaded into the active profile' in non-volatile memory (NVRAM). The factory default profile is stored in the modems read-only memory (ROM) and cannot be changed. The factory default profile contains standard settings which allow the majority of users to use their modem without ever knowing about the Hayes standard. Modems are not factory configured to answer incoming calls by default, so you will have to manually create your own user profile, enable auto answer on first ring, save it to one of the user profiles in NVRAM, and tell the modem to use it as the default profile on power up and reset. Use the 'tip' command to send Hayes commands to permanently configure the modem to answer incoming calls. Note: The Hayes modem commands are capital letters and the '0' is a zero. On the command line enter tip comX # where X is the com port your modem is on. AT&F0 # load the factory default profile0 into current profile. ATS0=1 # tell current profile to answer on first ring. AT&W0 # write current profile to saved user profile0. AT&Y0 # tell modem to load user profile0 as default on power up. Use the keyboard ~ key followed by the . key to exit tip. The above is from the FreeBSD install guide at www.a1poweruser.com Now I know nothing about vgetty so this is a shot in the dark, But I would think changing your init-string handed to the modem via mgetty.config: from this ATS0=0Q0&D3&C1 to this ATS0=1 should do the trick if you have configured vgetty correctly. Or just follow the above instructions and update the modems internal config and remove the init string statement from vgetty and be done with it. Good luck. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Robert McIntosh Sent: Tuesday, June 27, 2006 11:09 PM To: freebsd-questions@freebsd.org Subject: Re: vgetty Help Thanks fbsd, It seems that the init string command gives to this modem (which has a Conexant chipset, according to Creative's website) is incorrect. This init-string handed to the modem via mgetty.config: (again, this is for vgetty) ATS0=0Q0&D3&C1 I'm not familiar with Hayes compatible commands and hoping someone has some tips for me out there. Thanks again, Robert fbsd wrote: > you have to use your modems native "AT" commands to tell it to > answer inbound calls and then save that config on the modem and set > it as the default config to use when the modem is powered on. > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Robert > McIntosh > Sent: Monday, June 26, 2006 2:49 PM > To: freebsd-questions@freebsd.org > Subject: vgetty Help > > > Hi, > > I'm running into problems getting vgetty to function as an answering > machine. I've got a Creative ModemBlaster V.92 Serial DE5621 on > /dev/cuaa1 > > I'll call my number and the modem simply does not pick up. > > I the modem reports to be a voice modem from minicom, so I know it > has > this capability. > > Here's my configuration and log sample. > > Thanks in advance for any pointers, > Robert > > #cat /usr/local/etc/mgetty+send/voice.conf (comments removed) > > > part generic > ### > voice_log_level 4 > voice_shell_log /var/log/vgetty_voice_shell.%s > voice_dir /var/spool/voice > phone_owner root > phone_group phone > phone_mode 0660 > message_flag_file .flag > receive_dir incoming > message_dir messages > message_list Index > backup_message standard.rmd > port_speed 38400 > voice_shell /bin/sh > port_timeout 10 > dial_timeout 90 > command_delay 100 > dtmf_len 30 > dtmf_threshold 40 > dtmf_wait 7 > ignore_fax_dle false > raw_data false > rec_compression 0 > rec_speed 0 > rec_silence_len 70 > rec_silence_threshold 40 > rec_remove_silence false > rec_max_len 300 > rec_min_len 0 > do_hard_flow true > beep_frequency 933 > beep_length 1500 > max_tries 3 > retry_delay 5 > watchdog_timeout 60 > receive_gain -1 > transmit_gain -1 > enable_command_echo false > poll_interval 10 > enable_compression_mapping_querry TRUE >
Re: vgetty Help
Thanks fbsd, It seems that the init string command gives to this modem (which has a Conexant chipset, according to Creative's website) is incorrect. This init-string handed to the modem via mgetty.config: (again, this is for vgetty) ATS0=0Q0&D3&C1 I'm not familiar with Hayes compatible commands and hoping someone has some tips for me out there. Thanks again, Robert fbsd wrote: you have to use your modems native "AT" commands to tell it to answer inbound calls and then save that config on the modem and set it as the default config to use when the modem is powered on. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Robert McIntosh Sent: Monday, June 26, 2006 2:49 PM To: freebsd-questions@freebsd.org Subject: vgetty Help Hi, I'm running into problems getting vgetty to function as an answering machine. I've got a Creative ModemBlaster V.92 Serial DE5621 on /dev/cuaa1 I'll call my number and the modem simply does not pick up. I the modem reports to be a voice modem from minicom, so I know it has this capability. Here's my configuration and log sample. Thanks in advance for any pointers, Robert #cat /usr/local/etc/mgetty+send/voice.conf (comments removed) part generic ### voice_log_level 4 voice_shell_log /var/log/vgetty_voice_shell.%s voice_dir /var/spool/voice phone_owner root phone_group phone phone_mode 0660 message_flag_file .flag receive_dir incoming message_dir messages message_list Index backup_message standard.rmd port_speed 38400 voice_shell /bin/sh port_timeout 10 dial_timeout 90 command_delay 100 dtmf_len 30 dtmf_threshold 40 dtmf_wait 7 ignore_fax_dle false raw_data false rec_compression 0 rec_speed 0 rec_silence_len 70 rec_silence_threshold 40 rec_remove_silence false rec_max_len 300 rec_min_len 0 do_hard_flow true beep_frequency 933 beep_length 1500 max_tries 3 retry_delay 5 watchdog_timeout 60 receive_gain -1 transmit_gain -1 enable_command_echo false poll_interval 10 enable_compression_mapping_querry TRUE compression_8bit_linear_signed 0 compression_16bit_linear_signed 0 compression_8bit_linear_unsigned 1 compression_8bit_ulaw4 compression_8bit_alaw5 compression_2bit_adpcm 140 compression_4bit_adpcm 141 compression_4bit_ima_adpcm 129 program vgetty ### rings 3 answer_mode voice:fax:data force_autodetect false toll_saver_rings 0 rec_always_keep true button_program call_program dtmf_program dtmf.sh message_program do_message_light false ring_report_delay 15 program vm ### voice_devices cuaa1 dialout_timeout 90 ringback_goes_away 70 ringback_never_came 100 program pvf ### port cuaa1 rings 3 ring_type ring answer_mode voice:fax:data Output from the log... #tail -f /var/log/vgetty.cuaa1 06/26 11:38:52 aa1 waiting... 06/26 11:39:11 aa1 wfr: waiting for ``RING'' 06/26 11:39:11 aa1 wfr: waiting for ``RING'' 06/26 11:39:17 aa1 wfr: waiting for ``RING'' 06/26 11:39:23 aa1 reading ring_type ring configuration from config file /usr/local/etc/mgetty+sendfax/voice.conf 06/26 11:40:04 aa1 vgetty: timeout while reading character from voice modem 06/26 11:40:15 aa1 vgetty: timeout while reading character from voice modem 06/26 11:40:15 aa1 vgetty: Could not answer the phone. Strange... -- 06/26 11:40:15 aa1 vgetty: experimental test release 0.9.32 / with duplex patch 06/26 11:40:15 aa1 mgetty: interim release 1.1.34-Nov30 06/26 11:40:15 aa1 reading generic configuration from config file /usr/local/etc/mgetty+sendfax/voice.conf 06/26 11:40:15 aa1 reading program vgetty configuration from config file /usr/local/etc/mgetty+sendfax/voice.conf 06/26 11:40:15 aa1 reading port cuaa1 configuration from config file /usr/local/etc/mgetty+sendfax/voice.conf 06/26 11:40:15 aa1 check for lockfiles 06/26 11:40:15 aa1 locking the line 06/26 11:40:15 aa1 lowering DTR to reset Modem 06/26 11:40:16 aa1 send: ATS0=0Q0&D3&C1[0d] 06/26 11:40:16 aa1 waiting for ``OK'' ** found ** 06/26 11:40:16 aa1 mdm_send: 'ATI' 06/26 11:40:16 aa1 Generic Rockwell modem (56000) 06/26 11:40:16 aa1 mdm_send: 'ATI3' 06/26 11:40:16 aa1 mdm_send: 'ATI4' 06/26 11:40:16 aa1 additional info: 'a007040284C6002F' 06/26 11:40:16 aa1 modem quirks: 0004 06/26 11:40:16 aa1 mdm_send: 'AT+FCLASS=2' -> OK 06/26 11:40:16 aa1 mdm_send: 'AT+FCLASS=0' -> OK 06/26 11:40:16 aa1 mdm_send: 'AT+FAA=1;+FCR=1' -> OK 06/26 11:40:16 aa1 mdm_send: 'AT+FBOR=0' -> OK 06/26 11:40:16 aa1 mdm_send: 'AT+FLID="503.244.7197"' -> OK 06/26 11:40:17 aa1 mdm_send: 'AT+FDCC=1,5,0,2,0,0,0,0' -> OK 06/26 11:40:17 aa1 detecting voice modem type 06/26 11:40:18 aa1 Rockwell detected 06/26 11:40:30 aa1 vgetty: timeout while reading character from voice modem 06/26 11:40:30 aa1 initializing ROCKWELL voice modem 06/26 11:40:30 aa1 vgetty: Modem returned ERROR 06/2
RE: vgetty Help
you have to use your modems native "AT" commands to tell it to answer inbound calls and then save that config on the modem and set it as the default config to use when the modem is powered on. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Robert McIntosh Sent: Monday, June 26, 2006 2:49 PM To: freebsd-questions@freebsd.org Subject: vgetty Help Hi, I'm running into problems getting vgetty to function as an answering machine. I've got a Creative ModemBlaster V.92 Serial DE5621 on /dev/cuaa1 I'll call my number and the modem simply does not pick up. I the modem reports to be a voice modem from minicom, so I know it has this capability. Here's my configuration and log sample. Thanks in advance for any pointers, Robert #cat /usr/local/etc/mgetty+send/voice.conf (comments removed) part generic ### voice_log_level 4 voice_shell_log /var/log/vgetty_voice_shell.%s voice_dir /var/spool/voice phone_owner root phone_group phone phone_mode 0660 message_flag_file .flag receive_dir incoming message_dir messages message_list Index backup_message standard.rmd port_speed 38400 voice_shell /bin/sh port_timeout 10 dial_timeout 90 command_delay 100 dtmf_len 30 dtmf_threshold 40 dtmf_wait 7 ignore_fax_dle false raw_data false rec_compression 0 rec_speed 0 rec_silence_len 70 rec_silence_threshold 40 rec_remove_silence false rec_max_len 300 rec_min_len 0 do_hard_flow true beep_frequency 933 beep_length 1500 max_tries 3 retry_delay 5 watchdog_timeout 60 receive_gain -1 transmit_gain -1 enable_command_echo false poll_interval 10 enable_compression_mapping_querry TRUE compression_8bit_linear_signed 0 compression_16bit_linear_signed 0 compression_8bit_linear_unsigned 1 compression_8bit_ulaw4 compression_8bit_alaw5 compression_2bit_adpcm 140 compression_4bit_adpcm 141 compression_4bit_ima_adpcm 129 program vgetty ### rings 3 answer_mode voice:fax:data force_autodetect false toll_saver_rings 0 rec_always_keep true button_program call_program dtmf_program dtmf.sh message_program do_message_light false ring_report_delay 15 program vm ### voice_devices cuaa1 dialout_timeout 90 ringback_goes_away 70 ringback_never_came 100 program pvf ### port cuaa1 rings 3 ring_type ring answer_mode voice:fax:data Output from the log... #tail -f /var/log/vgetty.cuaa1 06/26 11:38:52 aa1 waiting... 06/26 11:39:11 aa1 wfr: waiting for ``RING'' 06/26 11:39:11 aa1 wfr: waiting for ``RING'' 06/26 11:39:17 aa1 wfr: waiting for ``RING'' 06/26 11:39:23 aa1 reading ring_type ring configuration from config file /usr/local/etc/mgetty+sendfax/voice.conf 06/26 11:40:04 aa1 vgetty: timeout while reading character from voice modem 06/26 11:40:15 aa1 vgetty: timeout while reading character from voice modem 06/26 11:40:15 aa1 vgetty: Could not answer the phone. Strange... -- 06/26 11:40:15 aa1 vgetty: experimental test release 0.9.32 / with duplex patch 06/26 11:40:15 aa1 mgetty: interim release 1.1.34-Nov30 06/26 11:40:15 aa1 reading generic configuration from config file /usr/local/etc/mgetty+sendfax/voice.conf 06/26 11:40:15 aa1 reading program vgetty configuration from config file /usr/local/etc/mgetty+sendfax/voice.conf 06/26 11:40:15 aa1 reading port cuaa1 configuration from config file /usr/local/etc/mgetty+sendfax/voice.conf 06/26 11:40:15 aa1 check for lockfiles 06/26 11:40:15 aa1 locking the line 06/26 11:40:15 aa1 lowering DTR to reset Modem 06/26 11:40:16 aa1 send: ATS0=0Q0&D3&C1[0d] 06/26 11:40:16 aa1 waiting for ``OK'' ** found ** 06/26 11:40:16 aa1 mdm_send: 'ATI' 06/26 11:40:16 aa1 Generic Rockwell modem (56000) 06/26 11:40:16 aa1 mdm_send: 'ATI3' 06/26 11:40:16 aa1 mdm_send: 'ATI4' 06/26 11:40:16 aa1 additional info: 'a007040284C6002F' 06/26 11:40:16 aa1 modem quirks: 0004 06/26 11:40:16 aa1 mdm_send: 'AT+FCLASS=2' -> OK 06/26 11:40:16 aa1 mdm_send: 'AT+FCLASS=0' -> OK 06/26 11:40:16 aa1 mdm_send: 'AT+FAA=1;+FCR=1' -> OK 06/26 11:40:16 aa1 mdm_send: 'AT+FBOR=0' -> OK 06/26 11:40:16 aa1 mdm_send: 'AT+FLID="503.244.7197"' -> OK 06/26 11:40:17 aa1 mdm_send: 'AT+FDCC=1,5,0,2,0,0,0,0' -> OK 06/26 11:40:17 aa1 detecting voice modem type 06/26 11:40:18 aa1 Rockwell detected 06/26 11:40:30 aa1 vgetty: timeout while reading character from voice modem 06/26 11:40:30 aa1 initializing ROCKWELL voice modem 06/26 11:40:30 aa1 vgetty: Modem returned ERROR 06/26 11:40:30 aa1 can't set silence period 06/26 11:40:30 aa1 vgetty: Modem returned ERROR 06/26 11:40:30 aa1 can't set transmit gain 06/26 11:40:30 aa1 vgetty: Modem returned ERROR 06/26 11:40:30 aa1 can't set record gain 06/26 11:40:30 aa1 vgetty: Modem returned ERROR 06/26 11:40:31 aa1 can't disable silence deletion 06/26 11:40:31 aa1 vgetty: Modem return
vgetty Help
Hi, I'm running into problems getting vgetty to function as an answering machine. I've got a Creative ModemBlaster V.92 Serial DE5621 on /dev/cuaa1 I'll call my number and the modem simply does not pick up. I the modem reports to be a voice modem from minicom, so I know it has this capability. Here's my configuration and log sample. Thanks in advance for any pointers, Robert #cat /usr/local/etc/mgetty+send/voice.conf (comments removed) part generic ### voice_log_level 4 voice_shell_log /var/log/vgetty_voice_shell.%s voice_dir /var/spool/voice phone_owner root phone_group phone phone_mode 0660 message_flag_file .flag receive_dir incoming message_dir messages message_list Index backup_message standard.rmd port_speed 38400 voice_shell /bin/sh port_timeout 10 dial_timeout 90 command_delay 100 dtmf_len 30 dtmf_threshold 40 dtmf_wait 7 ignore_fax_dle false raw_data false rec_compression 0 rec_speed 0 rec_silence_len 70 rec_silence_threshold 40 rec_remove_silence false rec_max_len 300 rec_min_len 0 do_hard_flow true beep_frequency 933 beep_length 1500 max_tries 3 retry_delay 5 watchdog_timeout 60 receive_gain -1 transmit_gain -1 enable_command_echo false poll_interval 10 enable_compression_mapping_querry TRUE compression_8bit_linear_signed 0 compression_16bit_linear_signed 0 compression_8bit_linear_unsigned 1 compression_8bit_ulaw4 compression_8bit_alaw5 compression_2bit_adpcm 140 compression_4bit_adpcm 141 compression_4bit_ima_adpcm 129 program vgetty ### rings 3 answer_mode voice:fax:data force_autodetect false toll_saver_rings 0 rec_always_keep true button_program call_program dtmf_program dtmf.sh message_program do_message_light false ring_report_delay 15 program vm ### voice_devices cuaa1 dialout_timeout 90 ringback_goes_away 70 ringback_never_came 100 program pvf ### port cuaa1 rings 3 ring_type ring answer_mode voice:fax:data Output from the log... #tail -f /var/log/vgetty.cuaa1 06/26 11:38:52 aa1 waiting... 06/26 11:39:11 aa1 wfr: waiting for ``RING'' 06/26 11:39:11 aa1 wfr: waiting for ``RING'' 06/26 11:39:17 aa1 wfr: waiting for ``RING'' 06/26 11:39:23 aa1 reading ring_type ring configuration from config file /usr/local/etc/mgetty+sendfax/voice.conf 06/26 11:40:04 aa1 vgetty: timeout while reading character from voice modem 06/26 11:40:15 aa1 vgetty: timeout while reading character from voice modem 06/26 11:40:15 aa1 vgetty: Could not answer the phone. Strange... -- 06/26 11:40:15 aa1 vgetty: experimental test release 0.9.32 / with duplex patch 06/26 11:40:15 aa1 mgetty: interim release 1.1.34-Nov30 06/26 11:40:15 aa1 reading generic configuration from config file /usr/local/etc/mgetty+sendfax/voice.conf 06/26 11:40:15 aa1 reading program vgetty configuration from config file /usr/local/etc/mgetty+sendfax/voice.conf 06/26 11:40:15 aa1 reading port cuaa1 configuration from config file /usr/local/etc/mgetty+sendfax/voice.conf 06/26 11:40:15 aa1 check for lockfiles 06/26 11:40:15 aa1 locking the line 06/26 11:40:15 aa1 lowering DTR to reset Modem 06/26 11:40:16 aa1 send: ATS0=0Q0&D3&C1[0d] 06/26 11:40:16 aa1 waiting for ``OK'' ** found ** 06/26 11:40:16 aa1 mdm_send: 'ATI' 06/26 11:40:16 aa1 Generic Rockwell modem (56000) 06/26 11:40:16 aa1 mdm_send: 'ATI3' 06/26 11:40:16 aa1 mdm_send: 'ATI4' 06/26 11:40:16 aa1 additional info: 'a007040284C6002F' 06/26 11:40:16 aa1 modem quirks: 0004 06/26 11:40:16 aa1 mdm_send: 'AT+FCLASS=2' -> OK 06/26 11:40:16 aa1 mdm_send: 'AT+FCLASS=0' -> OK 06/26 11:40:16 aa1 mdm_send: 'AT+FAA=1;+FCR=1' -> OK 06/26 11:40:16 aa1 mdm_send: 'AT+FBOR=0' -> OK 06/26 11:40:16 aa1 mdm_send: 'AT+FLID="503.244.7197"' -> OK 06/26 11:40:17 aa1 mdm_send: 'AT+FDCC=1,5,0,2,0,0,0,0' -> OK 06/26 11:40:17 aa1 detecting voice modem type 06/26 11:40:18 aa1 Rockwell detected 06/26 11:40:30 aa1 vgetty: timeout while reading character from voice modem 06/26 11:40:30 aa1 initializing ROCKWELL voice modem 06/26 11:40:30 aa1 vgetty: Modem returned ERROR 06/26 11:40:30 aa1 can't set silence period 06/26 11:40:30 aa1 vgetty: Modem returned ERROR 06/26 11:40:30 aa1 can't set transmit gain 06/26 11:40:30 aa1 vgetty: Modem returned ERROR 06/26 11:40:30 aa1 can't set record gain 06/26 11:40:30 aa1 vgetty: Modem returned ERROR 06/26 11:40:31 aa1 can't disable silence deletion 06/26 11:40:31 aa1 vgetty: Modem returned ERROR 06/26 11:40:31 aa1 can't set DLE responses 06/26 11:40:31 aa1 vgetty: Modem returned ERROR 06/26 11:40:31 aa1 can't set silence threshold 06/26 11:40:31 aa1 vgetty: Modem returned ERROR 06/26 11:40:32 aa1 waiting... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
