Hi,
i have follows your trouble with rc-scripts.
now im usind BSD for many years and i know! that *sh-ish rc-scripts
should be supported. But this is not my interest.
you have writte that the boxes with these behavior was updated from
RELENG_4 to RELENG_5? right?
if so double-check all these
Paul Civati a écrit :
Philippe PEGON [EMAIL PROTECTED] wrote:
I also tested it with em card and for me it only runs if I connect the
network card after the boot, otherwise I have the INIT symptom on carp's
interfaces.
Did the patch apply cleanly?
no
I applied it to 5.4-REL sources,
Hello list,
Does someone knows which driver is used for the Soekris lan1641 quad
ethernet card?
Ethernet chipset is National Semicondutor DP83816 but I can't find any
reference to
it in the hardware notes for 5.4. I need to know if ALTQ is available for
this card.
Thanks in advance!
Benjamin
On 2005.06.15 13:57:10 +0200, Constant, Benjamin wrote:
Does someone knows which driver is used for the Soekris lan1641 quad
ethernet card?
Ethernet chipset is National Semicondutor DP83816 but I can't find
any reference to it in the hardware notes for 5.4.
It's sis(4).
I need to know if
Constant, Benjamin wrote:
Hello list,
Does someone knows which driver is used for the Soekris lan1641 quad
ethernet card?
Ethernet chipset is National Semicondutor DP83816 but I can't find any
reference to it in the hardware notes for 5.4. I need to know if ALTQ
is available for this card.
on 09.06.2005 09:15 Andriy Gapon said the following:
NOTE: CURRENT was run under qemu emulation, CDROM was emulated from iso
image on HDD.
Got this LOR today with CURRENT built 3 days ago while trying to execute
a linux program located on a CD. Several days ago trying to do the same
on
On Wednesday 15 June 2005 13:57, Constant, Benjamin wrote:
Hello list,
Does someone knows which driver is used for the Soekris lan1641 quad
ethernet card?
Ethernet chipset is National Semicondutor DP83816 but I can't find any
reference to
it in the hardware notes for 5.4. I need to know if
Constant, Benjamin [EMAIL PROTECTED] writes:
Hi,
Ethernet chipset is National Semicondutor DP83816 but I can't find any
reference to it in the hardware notes for 5.4. I need to know if ALTQ
is available for this card.
man 4 sis
man 4 altq
Éric Masson
--
D'accord, mais si on se met à
On Wed, Jun 08, 2005 at 09:08:11AM -0400, Matt Smith wrote:
pflog0: promiscuous mode enabled
Do you want to be running this way?
This is normal operating mode for the pflog pseudo-interface. The
function of the pflog pseudo interface is to collect packets which the
pf packet filter dropped
Thanks to all for the details...
Soekris lan1641 is using chipset National Semicondutor DP83816 which
is not referenced in sis(4), that's why I was a bit confused.
Is there a path to follow to request an update of the man page?
Benjamin Constant
TI Automotive
-Original Message-
On Wednesday 15 June 2005 13:40, Constant, Benjamin wrote:
Thanks to all for the details...
Soekris lan1641 is using chipset National Semicondutor DP83816 which
is not referenced in sis(4), that's why I was a bit confused.
Is there a path to follow to request an update of the man page?
Constant, Benjamin [EMAIL PROTECTED] writes:
Is there a path to follow to request an update of the man page?
man send-pr
PR should be in category docs and class change-request, and ideally with
a patch correcting sis(4) manpage attached.
Éric Masson
--
Salut,
Je ne reçoit plus de messages
On Tue, Jun 14, 2005 at 10:40:50PM +0100, Paul Civati wrote:
P Philippe PEGON [EMAIL PROTECTED] wrote:
P
P Has anyone tested this?
P
P yes, it doesn't work, carp with vlan aren't supported on FreeBSD. There is
P a thread about that on freebsd-pf :
P
P
Hi!
Just a quick check - a client is getting a Proliant 380 G4 with a 6i Raid
controller. Haven't used this hardware before. Will it work fine with
FreeBSD? Which version will work best, 5.4 or 4.11? Any peculiarities or
things to think about?
Any input appreciated!
Thanks
Palle
On Wed, Jun 15, 2005 at 06:03:31PM +0200, Palle Girgensohn wrote:
Hi!
Just a quick check - a client is getting a Proliant 380 G4 with a 6i Raid
controller. Haven't used this hardware before. Will it work fine with
FreeBSD? Which version will work best, 5.4 or 4.11? Any peculiarities or
On Wed, Jun 15, 2005 at 06:03:31PM +0200, Palle Girgensohn wrote:
Hi!
Just a quick check - a client is getting a Proliant 380 G4 with a 6i Raid
controller. Haven't used this hardware before. Will it work fine with
FreeBSD? Which version will work best, 5.4 or 4.11? Any peculiarities or
Palle Girgensohn [EMAIL PROTECTED] wrote:
Just a quick check - a client is getting a Proliant 380 G4 with a 6i Raid
controller. Haven't used this hardware before. Will it work fine with
FreeBSD? Which version will work best, 5.4 or 4.11? Any peculiarities or
things to think about?
It sounds like the SMP kernel I provided for FreeBSD 5.3 was quite
popular, so I've started building an SMP kernel for FreeBSD 5.4 as
well, in addition to the usual GENERIC kernel. To take advantage
of this on your FreeBSD 5.4 SMP system, run the following commands
as root:
# touch
Palle Girgensohn a écrit :
Hi!
Just a quick check - a client is getting a Proliant 380 G4 with a 6i
Raid controller. Haven't used this hardware before. Will it work fine
with FreeBSD? Which version will work best, 5.4 or 4.11? Any
peculiarities or things to think about?
Any input
The 6i controller support is included in 4.11, so if you want to go
with 4.x family, 4.11 is your best bet. I am also running 5.3 and 5.4
on G4s without any problem.
-- Babak Farrokhi
On 6/15/05, Philippe PEGON [EMAIL PROTECTED] wrote:
Palle Girgensohn a écrit :
Hi!
Just a quick check - a
Hello all,
Recently, one of our 5.3-p16/i386 machine got frequenctly hang. Details,
1. I can switch vty, but can't login (after typing username, got hang)
2. can response to ping, but not other tcp/udp services
3. can break into ddb
It's a IBM X236 (EM64T) with 2G memory, and running
Hi, list
How I can use CARP for failover?
I need run script from CARP, when machine status change from backup to master?
By.
Dmitriy
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe,
Colin Percival wrote:
It sounds like the SMP kernel I provided for FreeBSD 5.3 was quite
popular, so I've started building an SMP kernel for FreeBSD 5.4 as
well, in addition to the usual GENERIC kernel. To take advantage
I'm curious how popular. Would you like to report some statistics
On Wednesday 15 June 2005 22:39, Dmitriy Kirhlarov wrote:
Hi, list
How I can use CARP for failover?
I need run script from CARP, when machine status change from backup to
master?
Take a look at net/ifstated from ports. As far as I understand devd can do
something like this as well since
Billy Newsom wrote:
Colin Percival wrote:
It sounds like the SMP kernel I provided for FreeBSD 5.3 was quite
popular [...]
I'm curious how popular. Would you like to report some statistics here
on the list? As in, how many SMP downloads did you get, say, in
comparison to the GENERIC?
On 6/15/05, Scot Hetzel [EMAIL PROTECTED] wrote:
On 6/14/05, Mars G. Miro [EMAIL PROTECTED] wrote:
If the build machine and install machine were at the same -RELEASE
number, I don't believe you would have come across this problem.
I'm not sure I get you but the purpose of making the
Hi,
(B
(BIs there the Atheros wi-fi driver with WPA encryption.
(BDo I need WPA_supplicant like hack?
(B
(BEitarou
(B
(B
(B___
(Bfreebsd-stable@freebsd.org mailing list
(Bhttp://lists.freebsd.org/mailman/listinfo/freebsd-stable
(BTo
On Thu, 16 Jun 2005 12:05, Eitarou Kamo wrote:
(B Is there the Atheros wi-fi driver with WPA encryption.
(B Do I need WPA_supplicant like hack?
(B
(BI'd say you need to use wpa_supplicant but I don't see it as a hack..
(B
(B
(B--
(BDaniel O'Connor software and network engineer
(Bfor
28 matches
Mail list logo