You might need to pass the library path on the environment or specify it
somewhere in CMakeLists.txt. Something like:
$ LIBDIR=/usr/local/lib cmake
You'll have to check the exact syntax though. I have had similar issues
trying to link LZMA in Dovecot on FreeBSD and specifying the library
have to
recreate the instance when moving from 10 to 11.
Cheers,
-Brian
> On Dec 19, 2018, at 7:33 AM, Matt Garber wrote:
>
>
>> On Dec 19, 2018, at 1:50 AM, Brian Neal wrote:
>>
>> I’m looking for advice on doing a release upgrade of a running instance. I
Hello,
I’m looking for advice on doing a release upgrade of a running instance. It
looks like the normal procedure using freebsd-update requires a reboot between
invocations of the install command, but after the first reboot, most of the
userland is non-functional, including most importantly
Hi,
Following the upgrade to 11.2-RELEASE, I've been seeing periodic network
adapter restarts for ena0 on an m5.large EC2 instance. I haven't seen
this prior with 11.1:
Jul 13 22:50:04 mail kernel: [1993] ena0: device is going DOWN
Jul 13 22:50:04 mail kernel: [1993] ena0: device is going UP
doesn't show the intel driver. In fact, there's the specific
part of the Makefile:
.if (${ARCH} == amd64 || ${ARCH} == i386) !defined(WITH_NEW_XORG)
VIDEO_ON+= intel
.endif
So what driver should I be using?
Thanks,
Neal.
___
freebsd-stable
on the Intel ICH7 as far
as I can tell, only for discs on the Promise PDC40718.
I am running 9.1-RC1 #1 amd64 built from fresh source today and I'm running the
GENERIC kernel.
If anyone has any ideas, I'd be very grateful.
Regards,
Neal.___
freebsd
On Fri, Jun 19, 2009 at 01:02:40PM +0100, Michal wrote:
It wasn't an argument or a versus anything. It was just a question relating
to what he had said and the truth in it and the two OS's being used for
different reasons. That's all. No rage, no debate or looking for any winner!
To be fair,
Wondering . . . did you mean 'AR5424', not 'AH5424'?
I'm asking because I have an atheros AR5424 and am (patiently) waiting for
support and can't find info on an atheros AH5424.
Thanks.
On Thu, Mar 12, 2009 at 11:31 AM, Bruce Simpson b...@incunabulum.net wrote:
Hello all,
This is just a
Hello,
I am attempting to get by broadcom wifi card up and running, am sick of
trying to get ndis working, and am attempting to use the bwi driver
(originating in dragonflyBSD). I'm hoping others here have tried to do the
same and have some pointers. I'm using 7.1-RELEASE (system/source are
no offer. Is
the fact that I fail to get an offer indicate the firmware incompatinbility?
Anyway, thanks for you help.
On Mon, Jan 12, 2009 at 12:32 PM, Paul B. Mahol one...@gmail.com wrote:
On 1/12/09, Neal Hogan nealho...@gmail.com wrote:
Hello,
I am attempting to get by broadcom wifi card
I've been trying to set up IPv6 and without ipfw my tunnel seems to
work. However I cannot seem to setup ipfw to allow IPv6 to flow. Do I
need to use ip6fw or just ipfw as that seems to accept ip6 protocols.
If I need to use ip6fw then why does ipfw accept ip6 protocols?
I'm using -STABLE
On 14 Dec 2005, at 20:00, Sam Leffler wrote:
Neal Nelson wrote:
Has anyone got FreeBSD 6.0 to work as a wireless access point using
WPA?
I'm running a Prism 2.5 based wireless card and have been using it as
an access point for years. It stills works OK but I installed the
hostapd port
Has anyone got FreeBSD 6.0 to work as a wireless access point using WPA?
I'm running a Prism 2.5 based wireless card and have been using it as
an access point for years. It stills works OK but I installed the
hostapd port in order to add WPA authentication. Unfortunately this
doesn't seem to
On Wed, Dec 12, 2001 at 09:44:56PM +0200, Alex Popa wrote:
disk I/O and heavy network I/O (my initial crashes occured when someone
was making a large backup over SMB to the server, at about 9M/s disk
I can't really offer any sort of useful help on any part of this
problem, except for this:
OK, here's a copy of my ppp.log attached. Let's hope it is enlightening:
[EMAIL PROTECTED] wrote:
I'm using a ppp.conf very similar to the sample ppp.conf and I don't have
any lines altering mtu/mru, so I don't know what I can change. All I'm
doing is bog standard dial up modem stuff. It
15 matches
Mail list logo
