Derek Kulinski wrote:
Hello Boris,
I checked the handbook, UPDATING, and nothing mentioned this thing,
why? I would think I'm not the only one with this problem, or am I?
Anyway it seems to work, I'm getting:
Starting hostapd.
Configuration file: /etc/hostapd.conf
wlan0: IEEE 802.11
Hello Sam,
Sunday, December 27, 2009, 12:05:34 PM, you wrote:
I didn't see anything in the thread to point a finger at freebsd but
given the debug msg log shows ath0 instead of wlan0 I'm guessing
whatever version was being used was pre-8.x.
I think I was the only one in thread who used
Derek Kulinski wrote:
Hello Sam,
Sunday, December 27, 2009, 12:05:34 PM, you wrote:
I didn't see anything in the thread to point a finger at freebsd but
given the debug msg log shows ath0 instead of wlan0 I'm guessing
whatever version was being used was pre-8.x.
I think I was the only one
Hello Sam,
Sunday, December 27, 2009, 4:55:12 PM, you wrote:
I think I was the only one in thread who used FreeBSD as an AP, also
that was before 7.x when I made the log. So I'm not saying it's
FreeBSD specific problem, I don't even think it's a BSD problem, but
perhaps some kind of
Multi-BSS support in 8.0 means that you first need to create a wlan
pseudo-device, and run hostapd with that. The rc.conf lines look like this:
wlans_ath0=wlan0
create_args_wlan0=wlanmode hostap
ifconfig_wlan0=ssid networkname media autoselect up
-Boris
Derek Kulinski wrote:
Hello,
I just
Am 16.12.2009 um 12:19 schrieb Derek Kulinski:
Hello,
I just upgraded my access point (from 7.1 to 8.0) and can't make
hostapd work (looks like wide-dhcp relay also has a problem with
ath0):
Things got a bit more complicated (and more powerful) with 8.0: you
now have to configure a
On Wed, 2009-12-16 at 03:19 -0800, Derek Kulinski wrote:
Hello,
I just upgraded my access point (from 7.1 to 8.0) and can't make
hostapd work (looks like wide-dhcp relay also has a problem with ath0):
The ifconfig usage changed in 8.0
The Handbook is not correct:
Hello Boris,
I checked the handbook, UPDATING, and nothing mentioned this thing,
why? I would think I'm not the only one with this problem, or am I?
Anyway it seems to work, I'm getting:
Starting hostapd.
Configuration file: /etc/hostapd.conf
wlan0: IEEE 802.11 Fetching hardware channel/rate
On Wednesday 16 December 2009 01:39:25 pm Derek Kulinski wrote:
Also how to create wlan device by hand? ifconfig ath0 wlandev wlan0
doesn't seem to work.
You have it backwards. It should be:
ifconfig wlan0 create wlandev ath0
___
Derek Kulinski wrote:
Hello Boris,
I checked the handbook, UPDATING, and nothing mentioned this thing,
why? I would think I'm not the only one with this problem, or am I?
Well, I learned about it because I follow the -current@ and -net@
mailing lists, but there is at least some mention of
Hello Boris,
Wednesday, December 16, 2009, 5:18:57 PM, you wrote:
20080420:
The 802.11 wireless support was redone to enable multi-bss
operation on devices that are capable. The underlying device
is no longer used directly but instead wlanX devices are
11 matches
Mail list logo