On Fri, Nov 11, 2005 at 11:10:51PM -0800, John-Mark Gurney wrote:
obviously you haven't done any research or even talked with Seagate
about this issue... Seagate has a Linux version of their Seagate
Enterprise Utility that allows you to flash their drives...
How is this relevant? Many of us
On Fri, 2005-11-11 at 22:57 -0800, Ade Lovett wrote:
On Nov 11, 2005, at 12:51 , Amit Rao wrote:
0) Upgrade to Seagate 10K.7 drive firmware level 0008. That seems
to help. One ahd sequencer error message still appears at boot,
but after that it seems to work (with your fingers crossed).
Ricardo A. Reis wrote:
Hi all,
The University where i work recent acquire a new server, i install
FreeBSD 6.0 and update for STABLE yestarday,
in dmesg i see this messages
ahd0: Invalid Sequencer interrupt occurred.
I've had similar problems with Dual channel U320 adaptec
and update for STABLE yestarday,
in dmesg i see this messages
ahd0: Invalid Sequencer interrupt occurred.
I've had similar problems with Dual channel U320 adaptec
controller (built in on supermicro board) and Seagate U320 drives.
The solution was to force the drives to U160 speed from
Ade Lovett wrote:
On Nov 10, 2005, at 05:30 , Ricardo A. Reis wrote:
Reducing the problem to the relevant pieces:
ahd0: Adaptec AIC7902 Ultra320 SCSI adapter port
0x2400-0x24ff,0x2000-0x20ff mem 0xdd20-0xdd201fff irq 32 at device
2.0 on pci3
ahd0: [GIANT-LOCKED]
aic7902: Ultra320 Wide
On Nov 11, 2005, at 12:51 , Amit Rao wrote:
0) Upgrade to Seagate 10K.7 drive firmware level 0008. That seems
to help. One ahd sequencer error message still appears at boot,
but after that it seems to work (with your fingers crossed).
Of course, you then spend far too much time ensuring
Ade Lovett wrote this message on Fri, Nov 11, 2005 at 22:57 -0800:
On Nov 11, 2005, at 12:51 , Amit Rao wrote:
0) Upgrade to Seagate 10K.7 drive firmware level 0008. That seems
to help. One ahd sequencer error message still appears at boot,
but after that it seems to work (with your
On Nov 11, 2005, at 23:10 , John-Mark Gurney wrote:
obviously you haven't done any research or even talked with Seagate
about this issue... Seagate has a Linux version of their Seagate
Enterprise Utility that allows you to flash their drives...
Yes, I have done plenty of research with
Hi all,
The University where i work recent acquire a new server, i install
FreeBSD 6.0 and update for STABLE yestarday,
in dmesg i see this messages
ahd0: Invalid Sequencer interrupt occurred.
full-dmesg-output
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983
On Nov 10, 2005, at 05:30 , Ricardo A. Reis wrote:
Reducing the problem to the relevant pieces:
ahd0: Adaptec AIC7902 Ultra320 SCSI adapter port 0x2400-0x24ff,
0x2000-0x20ff mem 0xdd20-0xdd201fff irq 32 at device 2.0 on pci3
ahd0: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel A, SCSI
10 matches
Mail list logo