Dear Paters,
Thank you for your reply.
From: Wes Peters [EMAIL PROTECTED]
Subject: Re: bge drivers does not work for 3COM 3C996-SX / 3C996B-T
Date: Sun, 28 Dec 2003 20:59:47 -0800
Message-ID: [EMAIL PROTECTED]
On Sunday 28 December 2003 04:01 am, Hideki Yamamoto wrote:
Hi,
I tried
Dear Peters
bge0: Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105 mem
0xf7ef-0xf7ef irq 10 at device 1.0 on pci1 bge0: Ethernet
address: 00:04:76:e1:06:cf
No miibus or PHY on bge0?
Sorry, I cannot answer because my knowledge is not sufficient.
Neither PHY nor
Hi guys,
i've problem trying to login on a freebsd-stable box using ssh and pub key
authentication.
If i try to login from a linux box i got this msg in my log:
fatal: monitor_read: unsupported request: 24
this only happen if i try to login as root and the pub key is correct (cause
i used it
Hi Paolo,
just a short guess,
[EMAIL PROTECTED] wrote:
Hi guys,
i've problem trying to login on a freebsd-stable box using ssh and pub key
authentication.
If i try to login from a linux box i got this msg in my log:
fatal: monitor_read: unsupported request: 24
this only happen if i try to
You are sure, that you allowed direct root login via ssh in your FreeBSD
box, are you ? Because the default installation denies direct root login.
See /etc/ssh/sshd_config the Parameter '#PermitRootLogin no' which is
the default.
You have to write 'PermitRootLogin yes' to allow it.
I did it,
The following is my most recent email message to someone who was
helping me with a very odd uname issue. I hope that this reporting of the
final events (oh-god-pleaselet-this-be-done-and-over-with) helps someone
else some day. The offer that I make at the end of my message is genuine.
If
Hi,
I added code to recognize 3com 1000base-SX card as miibus and
compiled them, but I do not have time to test yet.
I think this may solove my original problem that link of SUN SX card
does not go up, though 3com card goes up well.
I will start testing it from Jan.4,2004. I uploaded the
Am I safe to assume that if I dont have PAE enabled and have =2G of
RAM
installed, the driver should work ?
I would think so, but, as I wrote earlier, testing has been done
only on 4.8, and not yet on 4.9.
Also, will there be an updated
3dmd ?
I was wondering about 3dmd support too,
On Mon, Dec 29, 2003 at 02:21:56PM +0900, Rob wrote:
This is what I get.
The NFS server is 147.46.44.183 with gateway 147.46.44.1
The NFS client is 147.47.254.184 with gateway 147.47.254.1
On the NFS server:
$ sockstat | grep portmap
daemon portmap 796933 udp4 *:111
On Sun, 28 Dec 2003, Rob wrote:
On the client (147.47.254.184) I do not get the proper response on:
$ showmount -e 147.46.44.183
RPC: Port mapper failure
showmount: can't do exports rpc
Make sure portmap (or rpcbind if the server is 5.x) is allowed to talk to
the client in
10 matches
Mail list logo