Good day everyone,
I'm CC'ing you Sam and Damien, as you are the persons most familiar with
the involved components (I guess).
I set up an FreeBSD based WPA-AP with an ural device, which is working
fine. The hostapd.conf is roughly like this:
interface=ural0
driver=bsd
logger_syslog=-1
Holger,
puc0: Titan PCI-800H port 0xa400-0xa41f,0xa000-0xa01f mem
0xdf80-0xdf800fff,0xdf00-0xdf000fff irq 10 at device 11.0 on pci0
puc1: Titan PCI-800H port 0x9800-0x981f,0x9400-0x941f mem
0xde80-0xde800fff,0xde00-0xde000fff irq 10 at device 11.1 on pci0
The Titan device shows
On Fri, Apr 21, 2006 at 10:52:00AM +0200, Helge Oldach wrote:
Holger,
puc0: Titan PCI-800H port 0xa400-0xa41f,0xa000-0xa01f mem
0xdf80-0xdf800fff,0xdf00-0xdf000fff irq 10 at device 11.0 on pci0
puc1: Titan PCI-800H port 0x9800-0x981f,0x9400-0x941f mem
I am experiencing the exact same problem with 6.1-RC and iwi trying to
connect to an OpenWrt wireless router.
- Bartosz
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail
Hey all,
Since using 6-stable for the last few months I keep getting these ssh
client/server? debug messages, I wasn't that annoyed with them at first
I figured it was just something part of 6.1 betas but now its just
getting annoying, and I am still getting them on the latest rc1 build.
Here
On Wednesday 19 April 2006 00:44, Colin Percival wrote:
I have a list of people who have offered mirrors, but so far I haven't
seen any need for additional mirrors -- the two which already exist are
showing no signs of slowing down.
Hm, but I see a quite noticeable speed difference between
Michael Vince wrote:
Hey all,
Since using 6-stable for the last few months I keep getting these ssh
client/server? debug messages, I wasn't that annoyed with them at
first I figured it was just something part of 6.1 betas but now its
just getting annoying, and I am still getting them on the
Hi,
I tried to install FreeBSD 6.1-RC1 on my Acer Aspire 1304LC Notebook. That
notebook has a AMD Athlon XP 1800+ CPU.
The installation process succeeded but I can't get any power management to
work. If I load cpufreq.ko I get:
powernow0: PowerNow! K7 on cpu0
powernow0: ACPI MAX
On Fri, 2006-04-21 at 14:40 +0200, Benjamin Lutz wrote:
On Wednesday 19 April 2006 00:44, Colin Percival wrote:
I have a list of people who have offered mirrors, but so far I haven't
seen any need for additional mirrors -- the two which already exist are
showing no signs of slowing down.
Paul Mather wrote:
On Fri, 2006-04-21 at 14:40 +0200, Benjamin Lutz wrote:
Hm, but I see a quite noticeable speed difference between portsnap1 and
portsnap2. The second one is quite a bit faster.
I'll look into this over the summer.
I notice that on 4.x portsnap never finds any mirrors
I have this card install in a System but the GENERIC kernel does not pick it
up. Is there a custom driver for this card or a step I'm missing.
Matt
___
freebsd-stable@freebsd.org mailing list
--- Forwarded message ---
From: Ricardo A. Reis [EMAIL PROTECTED]
To: freebsd-security@freebsd.org freebsd-security@freebsd.org
Cc: freebsd-current@freebsd.org freebsd-current@freebsd.org
Subject: Prototyping for basejail distribuition
Date: Thu, 13 Apr 2006 17:21:38 -0300
Hi,
I
We're having problems with FreeBSD 5.4, 6.0, and 6.1 and an ICP Vortex
GDT8546RZ 4 port SATA RAID card in a Tyan S2460 system with dual AMD
Athlon MP 1600+ CPUs. We do not have any problems with this
configuration under FreeBSD 4.11, and we have the same ICP cards in
Tyan based Opterion system
Douglas K. Rand wrote this message on Fri, Apr 21, 2006 at 16:59 -0500:
We're having problems with FreeBSD 5.4, 6.0, and 6.1 and an ICP Vortex
GDT8546RZ 4 port SATA RAID card in a Tyan S2460 system with dual AMD
Athlon MP 1600+ CPUs. We do not have any problems with this
configuration under
Doug We're having problems with FreeBSD 5.4, 6.0, and 6.1 and an ICP
Doug Vortex GDT8546RZ 4 port SATA RAID
John-Mark We've had very similar experiences on 4.7-R. The box would
John-Mark hang on one partition waiting for IO to come back, but
John-Mark direct access to the disk, or accessing
Douglas K. Rand wrote this message on Fri, Apr 21, 2006 at 17:31 -0500:
Doug We're having problems with FreeBSD 5.4, 6.0, and 6.1 and an ICP
Doug Vortex GDT8546RZ 4 port SATA RAID
John-Mark We've had very similar experiences on 4.7-R. The box would
John-Mark hang on one partition waiting
On 4/18/06, Matt Watson [EMAIL PROTECTED] wrote:
Hello All,
I'm not sure if this is the right place to be sending this or not but I
figured I'd give it a shot.
The subject line pretty much says it all, I have a Dell Poweredge 650 box
running 6.1-PRERELEASE which was cvsup'd on April 5,
Matt Watson wrote:
The subject line pretty much says it all, I have a Dell Poweredge 650
box running 6.1-PRERELEASE which was cvsup'd on April 5, 2006. The box
has now twice rebooted on its own for no aparant reason.
...
[Log indicates no errors, spontaneous reboot.]
...
This machine
Douglas K. Rand wrote:
Doug We're having problems with FreeBSD 5.4, 6.0, and 6.1 and an ICP
Doug Vortex GDT8546RZ 4 port SATA RAID
John-Mark We've had very similar experiences on 4.7-R. The box would
John-Mark hang on one partition waiting for IO to come back, but
John-Mark direct access to
19 matches
Mail list logo