Hi,
I need to listen up the fatm0 interface but could not do that. Is there any
reason for that?
Thanks in advance.
Husnu Demir.
---
Error Message:
# tcpdump -i fatm0
tcpdump: BIOCSETIF: fatm0: Device not configured
And settings;
#
Hi Roland,
On (060705), Roland Smith wrote:
couple of weeks - the network interface rl0 (which is the main
interface on the maschine, rl1 is for backups/internal use only) stops
Are they physically on the motherboard? Or on PCI cards? In the latter
case try reseating the card in the slot.
Brooks Davis wrote:
On Thu, Jul 06, 2006 at 02:45:45AM +0200, [LoN]Kamikaze wrote:
I normally run the command
# pkg_version -Iv | grep \
before running 'portupgrade -a', to see what's going to happen. This time I
got the following output:
diablo-jdk-freebsd6.i386.1.5.0.07.00 needs
On Thu, 6 Jul 2006, Max Laier wrote:
On Thursday 06 July 2006 02:02, Vye Wilson wrote:
I'm really not sure how to go about troubleshooting this issue. Can someone
point me in the right direction?
vmstat -i should give a good idea what is causing the interrupt load.
I also highly recommend
Hi,
We have a gvinum raid-5 volume that that we had to replace a disk on and
after that we cant get the new subdisk starting.
Here are the things we did:
1: Replace disk and boot singleuser to fdisk and lable new disk:
gvinum - list
5 drives:
D disk4 State: up
Hi,
I get the below panic when rebuilding a graid3 array. Is this indicative
of a hardware or software problem? Or is some of the data on my array
corrupt and I should just rebuild the array? I searched on google and
didn't find much.
panic: mb_dtor_pack: ext_size != MCLBYTES
Thanks for your
On Wed, 05 Jul 2006 02:49:26 +0200, Scott Long [EMAIL PROTECTED] wrote:
Michel Talon wrote:
BTW, I noticed yesterday that that IPv6 support committ to rpc.lockd
was never backed out. An immediate question for people experiencing
new rpc.lockd problems with 6.x should be whether or not
Does anybody have temperature and fan monitoring working on Dell
PowerEdge 750's 850's? I have done my share of googling without much
luck.
--
Arnold Cavazos, Jr. abcjr at abcjr . net
___
freebsd-stable@freebsd.org mailing list
Dear all.
I have the following trouble:
Using carp and pfsync i have made the redundand firewall (OS is 6.1p2
and everything is done like in mans, even ifconfig options)
The only thing that is different that i have 2 ethernet interface (one
for crosover link and the other is the paren interface
Pyun YongHyeon said the following on 7/5/06 7:14 PM:
Here is patch generated against RELENG_6.
OK, I just tested that, but it doesn't seem to make any difference.
Here's what I did:
I commented out the em device from my kernel (a 6-STABLE one from
yesterday) and compiled three if_em kernel
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Arnold Cavazos Jr. wrote:
| Does anybody have temperature and fan monitoring working on Dell
| PowerEdge 750's 850's? I have done my share of googling without much
| luck.
|
Which monitoring tools have you tried, sysutils/mbmon?
What sort of
Does anybody have temperature and fan monitoring working on Dell
PowerEdge 750's 850's? I have done my share of googling without
much luck.
With the DRAC III/XT card installed, I am monitoring PE750's using
the IPMI device (device ipmi in the kernel config of 6.1-STABLE)
and the ipmitool
On Thu, Jul 06, 2006 at 01:29:11PM -0700, Atanas wrote:
Pyun YongHyeon said the following on 7/5/06 7:14 PM:
Here is patch generated against RELENG_6.
OK, I just tested that, but it doesn't seem to make any difference.
Here's what I did:
I commented out the em device from my
On Thu, Jul 06, 2006 at 06:04:37PM +0200, [LoN]Kamikaze wrote:
Brooks Davis wrote:
On Thu, Jul 06, 2006 at 11:01:43AM +0200, [LoN]Kamikaze wrote:
Brooks Davis wrote:
On Thu, Jul 06, 2006 at 02:45:45AM +0200, [LoN]Kamikaze wrote:
I normally run the command
# pkg_version -Iv | grep \
I'm getting a ton of them now, and i found a way to reproduce them.
Basically i run a compile session in one terminal, say make buildkernel,
and run top in another. As soon as i run top, the messages appear, and
they seem to be synchronized with the refresh rate of top, 2 messages
per refresh.
Pyun YongHyeon said the following on 7/6/06 6:03 PM:
Hmm, that's strange. I've double checked that stock em(4) didn't
generate ARP packets when its addresses were changed. So I made
em(4) generate ARP. Could you see a gratuitous ARP with tcpdump
when you change its address?
I just left a
On Thu, Jul 06, 2006 at 07:11:57PM -0700, Atanas wrote:
Pyun YongHyeon said the following on 7/6/06 6:03 PM:
Hmm, that's strange. I've double checked that stock em(4) didn't
generate ARP packets when its addresses were changed. So I made
em(4) generate ARP. Could you see a gratuitous
17 matches
Mail list logo
