This is a test message from Cogeco Cable. No reply is necessary.
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to freebsd-stable-unsubscr...@freebsd.org
Paul MacKenzie wrote:
last pid: 46013; load averages: 105.30, 67.67,
34.45 up 4+23:59:42 19:08:40
629 processes: 89 running, 540 sleeping
CPU: 21.9% user, 0.0% nice, 74.5% system, 3.1% interrupt, 0.4% idle
Mem: 1538M Active, 11G Inact, 898M
Just to confirm we see something similar on the box which runs our stats.
We have updated from 5.4 - 6.0 - 6.2 - 7.0 all have had no effect on
the lockups which happen when the stats run.
This box is also on an areca controller but it was on an Adaptec and we
saw pretty much the same thing so I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi, Nawfal,
Nawfal bin Mohmad Rouyan wrote:
I have been using a Dell machine with 2 bce interfaces as a bridge
between my LAN and Firewall to shape the traffic. Since after the
update, the machine can only run for a few minutes and after
2008/12/17 test1...@cogeco.ca:
This is a test message from Cogeco Cable. No reply is necessary.
What's wrong with http://lists.freebsd.org/mailman/listinfo/freebsd-test ?
--
R $h ! $- ! $+ $@ $2 @ $1 .UUCP. (sendmail.cf)
___
Just to confirm we see something similar on the box which runs our stats.
We have updated from 5.4 - 6.0 - 6.2 - 7.0 all have had no effect on
the lockups which happen when the stats run.
This box is also on an areca controller but it was on an Adaptec and we
saw pretty much the same thing
Hi,
Does FreeBSD 7.1 support eSATA hot swappable disks?
cheers
BMS
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to freebsd-stable-unsubscr...@freebsd.org
Paul B. Mahol wrote:
Project itself doesnt look very active, but I may be wrong. It is in alpha state
as reported on SF.
IMHO it is better to maintain our own because it is in better shape, but I'm not
intersted in ext* as developer.
Shelved due to lack of interest, then... others can feel
Hi,
| By Ken Smith kensm...@cse.buffalo.edu
| [ 2008-12-10 04:40 +0200 ]
In addition to general testing we're looking for information about
potential problems with the boot loader. There has been traffic here
about problems but the reports haven't
Bruce Simpson wrote:
Does FreeBSD 7.1 support eSATA hot swappable disks?
Answer: Yes.
I have a hot-swap case and can swap my internal SATA disks. Your
eSATA's show up as 'ad' devices, correct? You may need to run
atacontrol to get the drives to show up after you hot-plug them.
atacontrol
On Sun, Sep 28, 2008 at 03:46:20PM +1000, Edwin Groothuis wrote:
I have made an update for the top(1) utility in the FreeBSD base
system to get it from the 3.5b12 version to the 3.8b1 version.
[...]
Please report any issues with it (compile time, run time) and a way
to reproduce it (if
last pid: 46013; load averages: 105.30, 67.67,
34.45 up 4+23:59:42 19:08:40
629 processes: 89 running, 540 sleeping
CPU: 21.9% user, 0.0% nice, 74.5% system, 3.1% interrupt, 0.4% idle
Mem: 1538M Active, 11G Inact, 898M Wired, 303M Cache, 214M
Hi!
I used to use the FreeBSD on i386 architecture together with the controller
Mylex AcceleRAID 170.There was RAID 0+1 configured on it out of 5 discs
(Enhanced Mirroring).
# pciconf -lvc
...
m...@pci0:6:1:0:class=0x010400 card=0x00521069 chip=0x00501069 rev=0x02
hdr=0x00
vendor
13 matches
Mail list logo