On 2010-Mar-25 21:32:10 +0200, Nezmer b...@nezmer.info wrote:
This is the 1st time FreeBSD panics on me. It happened after a
minute of mounting an XFS partition. I'm not sure It's XFS but It's the
only part of the OS I try for the 1st time.
kernel: vn_iowait doing nothing on FreeBSD?
This is
At 09:24 PM 3/25/2010, Ian Smith wrote:
On Wed, 24 Mar 2010, John Long wrote:
At 11:27 PM 3/22/2010, Alexander Motin wrote:
John Long wrote:
Hello, I am putting together a couple update servers. Went with c2d
E7500 on gigabyte G41M-ES2L boards. fbsd 8.0 release generic (so
far)
John Long wrote:
Have you tried C2? Are you running the latest BIOS? And perhaps your
ACPI ASL may be amenable to repair, if Gigabyte ACPI is broken here?
As I can see, your ACPI reports C3 state support. You may try it also.
Here is my notes about power and C3 also:
On Fri, Mar 26, 2010 at 01:20:19AM -0700, John Long wrote:
Yes you're only getting p4tcc throttling as Alexander points out. You'll
need to get est working to get power reduction from lower frequencies,
which likely won't correspond to these f/8 step throttling frequencies.
As Jeremy
Outset:
1 NFS server (with lockd)
2 NFS client (with lockd)
The clients serve several jails with apache, whose data (www) resides on
the server
From time to time everything seem to freeze. Then, after one minute or
so, the system
works again as nothing had happened.
In these occasions I
Attempting make release results in error complaining that perl-5.8.9
installs into the same locations as perl-5.10.1.
This seems similar to the problem I encountered with make release when NODOC
was not set.
The complaint then was that ghostscript8-nox11 installs into the same
locations as
At 01:31 AM 3/26/2010, Alexander Motin wrote:
John Long wrote:
Have you tried C2? Are you running the latest BIOS? And perhaps your
ACPI ASL may be amenable to repair, if Gigabyte ACPI is broken here?
As I can see, your ACPI reports C3 state support. You may try it also.
Here is my notes about
I tried to upgrade a 7.2 system to 8.0. It uses a SCSI drive. It works fine
on 7.2. However, it would appear that during the upgrade process when running
make delete-old (?) there is a note about make delete-old-libs (?). Don't do
that at that point. End of system. Make installworld fails
On Fri, 26 Mar 2010, Jeremy Chadwick wrote:
[ leaving the MB monitoring stuff alone for your expert attention :-]
It jumped up in vcore a little there with powerd. C1E and C2E which
include P-states are what I am really after and I think that the
bios by itself provides those changes
