At 01:07 AM 21/12/2002 +0100, Thomas Nystrom wrote:
Is it possible for you to check the type and brand of the PHY-chip? You
must locate the chip directly on the motherboard. Or tell me the type of
the motherboard and I might grab some info about the board from the net.
Hi,
The
Mike Tancsa wrote:
Hi,
The Motherboard is a BioStar U8068. Chipset is Via VT8751
(pm4M266)/VT8235. There is nothing obvious on the board that says what
rev. If you like, I could send you a couple of .jpg images of the
motherboard if that helps.
Ok, I have found that the board
At 07:34 PM 23/12/2002 +0100, Thomas Nystrom wrote:
Ok, I have found that the board should have a VT6103 PHY-chip. There is no
specific support for that chip in FreeBSD and the default PHY driver is
used instead.
Hi,
By no specific driver, does that mean none is needed ? Or just that nothing
Barry Pederson wrote:
When you're testing the vr driver, is it possible to do it as a loadable
module, where you could repeatedly compile/kldload/test/kldunload? Or do
you have to compile-the-kernel/install/reboot/test?
When I was fighting with vr on my mini-itx board, I was doing it the
Thomas Nystrom wrote:
I have found one other person who has run the test sucessfully but I would
feel more comfortable if there were some more people that had run the
patch. I have also got a reply from a person in Finland that are going
to do exactly the same thing as you are.
When you're