Re: ath0 associated, wlan0 not associated
On Sat, Nov 05, 2016 at 01:00:56PM -0400, George Mitchell wrote: > On 11/05/16 01:05, Adrian Chadd wrote: > > nope, sorry. There's a lot of work in the -11 wifi stack and drivers. > > > > > > -a > > > > [...] > > Okay, I downloaded and installed 11.0-RELEASE on a spare slice, and > dmesg tells me the following (with regard to ath0): > > > ath0: mem 0xf0a0-0xf0a7 irq 36 at > device 0.0 on pci2 > ath0: WB335 2-ANT card detected > ath0: Bluetooth Antenna Diversity card detected > ath0: [HT] enabling HT modes > ath0: [HT] enabling short-GI in 20MHz mode > ath0: [HT] 1 stream STBC receive enabled > ath0: [HT] 1 RX streams; 1 TX streams > ath0: QCA9565 mac 704.1 RF5110 phy 2523.1 > ath0: 2GHz radio: 0x; 5GHz radio: 0x > > But ifconfig tells me there is no "ath0" interface ... Does 11.0 > handle wifi in some unfamiliar manner? -stable-unsubscr...@freebsd.org" "sysctl net.wlan.devices" should show ath0 pgpx2bZIyeWe1.pgp Description: PGP signature
Re: ath0 associated, wlan0 not associated
On Sat, Nov 5, 2016 at 11:58 AM, George Mitchellwrote: > On 11/05/16 13:00, George Mitchell wrote: > > On 11/05/16 01:05, Adrian Chadd wrote: > >> nope, sorry. There's a lot of work in the -11 wifi stack and drivers. > >> > >> > >> -a > >> > >> [...] > > > > Okay, I downloaded and installed 11.0-RELEASE on a spare slice, and > > dmesg tells me the following (with regard to ath0): > > > > > > ath0: mem 0xf0a0-0xf0a7 irq 36 at > > device 0.0 on pci2 > > ath0: WB335 2-ANT card detected > > ath0: Bluetooth Antenna Diversity card detected > > ath0: [HT] enabling HT modes > > ath0: [HT] enabling short-GI in 20MHz mode > > ath0: [HT] 1 stream STBC receive enabled > > ath0: [HT] 1 RX streams; 1 TX streams > > ath0: QCA9565 mac 704.1 RF5110 phy 2523.1 > > ath0: 2GHz radio: 0x; 5GHz radio: 0x > > > > But ifconfig tells me there is no "ath0" interface ... Does 11.0 > > handle wifi in some unfamiliar manner? I put my usual wifi magic > > into rc.conf: > > > > create_args_wlan0="country US" > > ifconfig_wlan0="WPA DHCP" > > wlans_ath0="wlan0" > > > > -- George > > > I forgot to copy my wpa_supplicant.conf over. Now it works! (I > guess the invisible ath0 is just how 11.0 works?) -- George Yes, as you speculate, the 802.11 software had a major rework and only the wlan interface is visible. It is due to this re-work that the changes to the wireless drivers can't be reasonably back-ported to 10. -- Kevin Oberman, Part time kid herder and retired Network Engineer E-mail: rkober...@gmail.com PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683 ___ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
Re: ath0 associated, wlan0 not associated
On 11/05/16 13:00, George Mitchell wrote: > On 11/05/16 01:05, Adrian Chadd wrote: >> nope, sorry. There's a lot of work in the -11 wifi stack and drivers. >> >> >> -a >> >> [...] > > Okay, I downloaded and installed 11.0-RELEASE on a spare slice, and > dmesg tells me the following (with regard to ath0): > > > ath0: mem 0xf0a0-0xf0a7 irq 36 at > device 0.0 on pci2 > ath0: WB335 2-ANT card detected > ath0: Bluetooth Antenna Diversity card detected > ath0: [HT] enabling HT modes > ath0: [HT] enabling short-GI in 20MHz mode > ath0: [HT] 1 stream STBC receive enabled > ath0: [HT] 1 RX streams; 1 TX streams > ath0: QCA9565 mac 704.1 RF5110 phy 2523.1 > ath0: 2GHz radio: 0x; 5GHz radio: 0x > > But ifconfig tells me there is no "ath0" interface ... Does 11.0 > handle wifi in some unfamiliar manner? I put my usual wifi magic > into rc.conf: > > create_args_wlan0="country US" > ifconfig_wlan0="WPA DHCP" > wlans_ath0="wlan0" > > -- George > I forgot to copy my wpa_supplicant.conf over. Now it works! (I guess the invisible ath0 is just how 11.0 works?) -- George ___ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
Re: ath0 associated, wlan0 not associated
On 11/05/16 01:05, Adrian Chadd wrote: > nope, sorry. There's a lot of work in the -11 wifi stack and drivers. > > > -a > > [...] Okay, I downloaded and installed 11.0-RELEASE on a spare slice, and dmesg tells me the following (with regard to ath0): ath0: mem 0xf0a0-0xf0a7 irq 36 at device 0.0 on pci2 ath0: WB335 2-ANT card detected ath0: Bluetooth Antenna Diversity card detected ath0: [HT] enabling HT modes ath0: [HT] enabling short-GI in 20MHz mode ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 RX streams; 1 TX streams ath0: QCA9565 mac 704.1 RF5110 phy 2523.1 ath0: 2GHz radio: 0x; 5GHz radio: 0x But ifconfig tells me there is no "ath0" interface ... Does 11.0 handle wifi in some unfamiliar manner? I put my usual wifi magic into rc.conf: create_args_wlan0="country US" ifconfig_wlan0="WPA DHCP" wlans_ath0="wlan0" -- George ___ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
Re: ath0 associated, wlan0 not associated
nope, sorry. There's a lot of work in the -11 wifi stack and drivers. -a On 3 November 2016 at 16:04, George Mitchell <george+free...@m5p.com> wrote: > Thanks for the suggestion. I won't be able to try it until after a > business trip next week. Any patches available that apply to 10.3? > -- George > > On 11/03/16 18:48, Adrian Chadd wrote: >> hi, >> >> can you please try freebsd-11.0 ? I fixed a whole bunch of bugs in the >> AR9380 HAL and it may have improved that device. >> >> Thanks! >> >> >> -a >> >> >> On 3 November 2016 at 07:09, George Mitchell <george+free...@m5p.com> wrote: >>> Originally posted to freebsd-wireless; no solution yet so I thought >>> I'd try here. After booting up, my ath0 interface says it is >>> associated, but my wlan0 says it is not: >>> >>> >>> FreeBSD 10.3-RELEASE-p11 >>> wpa_supplicant v2.0 >>> Copyright (c) 2003-2012, Jouni Malinen <j...@w1.fi> and contributors >>> >>> ath0@pci0:2:0:0:class=0x028000 card=0x064211ad chip=0x0036168c >>> rev=0x01 >>> hdr=0x00 >>> vendor = 'Qualcomm Atheros' >>> device = 'QCA9565 / AR9565 Wireless Network Adapter' >>> class = network >>> >>> grep wlan /etc/rc.conf: >>> create_args_wlan0="country US" >>> ifconfig_wlan0="WPA DHCP" >>> wlans_ath0="wlan0" >>> >>> And the result is: >>> >>> ifconfig wlan0: >>> wlan0: flags=8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST> metric >>> 0 mtu 1500 >>> ether d0:53:49:91:6f:a1 >>> inet6 fe80::d253:49ff:fe91:6fa1%wlan0 prefixlen 64 scopeid 0x4 >>> inet 0.0.0.0 netmask 0xff00 broadcast 255.255.255.255 >>> nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> >>> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) >>> status: no carrier >>> ssid "" channel 2 (2417 MHz 11g ht/40+) >>> regdomain FCC country US indoor ecm authmode WPA2/802.11i privacy ON >>> deftxkey UNDEF txpower 30 bmiss 7 scanvalid 60 protmode CTS >>> ampdulimit 8k ampdudensity 8 shortgi wme burst roaming MANUAL >>> >>> ifconfig ath0: >>> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290 >>> ether d0:53:49:91:6f:a1 >>> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> >>> media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng >>> status: associated >>> >>> grep wpa /var/log/messages: >>> ov 1 09:16:54 haymarket wpa_supplicant[389]: wlan0: Trying to associate >>> with xx:xx:xx:xx:xx:xx (SSID='yy' freq=2417 MHz) >>> Nov 1 09:16:54 haymarket wpa_supplicant[389]: wlan0: Associated with >>> 60:e3:27:7b:e8:42 >>> Nov 1 09:16:54 haymarket wpa_supplicant[389]: wlan0: WPA: Key >>> negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=TKIP] >>> Nov 1 09:16:54 haymarket wpa_supplicant[389]: wlan0: >>> CTRL-EVENT-CONNECTED - Connection to xx:xx:xx:xx:xx:xx completed [id=1 >>> id_str=] >>> Nov 1 09:16:55 haymarket wpa_supplicant[389]: wlan0: WPA: Key >>> negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=TKIP] >>> Nov 1 09:16:56 haymarket wpa_supplicant[389]: wlan0: WPA: Key >>> negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=TKIP] >>> Nov 1 09:16:57 haymarket wpa_supplicant[389]: wlan0: WPA: Key >>> negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=TKIP] >>> Nov 1 09:16:57 haymarket wpa_supplicant[389]: wlan0: >>> CTRL-EVENT-DISCONNECTED bssid=xx:xx:xx:xx:xx:xx reason=0 >>> Nov 1 09:16:59 haymarket wpa_supplicant[389]: wlan0: Trying to >>> associate with xx:xx:xx:xx:xx:xx (SSID='yy' freq=2417 MHz) >>> Nov 1 09:17:09 haymarket wpa_supplicant[389]: wlan0: Authentication >>> with xx:xx:xx:xx:xx:xx timed out. >>> Nov 1 09:17:09 haymarket wpa_supplicant[389]: wlan0: >>> CTRL-EVENT-DISCONNECTED bssid=xx:xx:xx:xx:xx:xx2 reason=3 >>> locally_generated=1 >>> Nov 1 09:18:13 haymarket wpa_supplicant[389]: wlan0: Trying to >>> associate with xx:xx:xx:xx:xx:xx (SSID='yy' freq=2417 MHz >>> >>> etc. >>> >>> So how does ath0 get associated but not wlan0? -- George >>> >>> ___ >>> freebsd-stable@freebsd.org mailing list >>> https://lists.freebsd.org/mailman/listinfo/freebsd-stable >>> To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" >> ___ >> freebsd-stable@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-stable >> To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" >> > ___ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
Re: ath0 associated, wlan0 not associated
Thanks for the suggestion. I won't be able to try it until after a business trip next week. Any patches available that apply to 10.3? -- George On 11/03/16 18:48, Adrian Chadd wrote: > hi, > > can you please try freebsd-11.0 ? I fixed a whole bunch of bugs in the > AR9380 HAL and it may have improved that device. > > Thanks! > > > -a > > > On 3 November 2016 at 07:09, George Mitchell <george+free...@m5p.com> wrote: >> Originally posted to freebsd-wireless; no solution yet so I thought >> I'd try here. After booting up, my ath0 interface says it is >> associated, but my wlan0 says it is not: >> >> >> FreeBSD 10.3-RELEASE-p11 >> wpa_supplicant v2.0 >> Copyright (c) 2003-2012, Jouni Malinen <j...@w1.fi> and contributors >> >> ath0@pci0:2:0:0:class=0x028000 card=0x064211ad chip=0x0036168c >> rev=0x01 >> hdr=0x00 >> vendor = 'Qualcomm Atheros' >> device = 'QCA9565 / AR9565 Wireless Network Adapter' >> class = network >> >> grep wlan /etc/rc.conf: >> create_args_wlan0="country US" >> ifconfig_wlan0="WPA DHCP" >> wlans_ath0="wlan0" >> >> And the result is: >> >> ifconfig wlan0: >> wlan0: flags=8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST> metric >> 0 mtu 1500 >> ether d0:53:49:91:6f:a1 >> inet6 fe80::d253:49ff:fe91:6fa1%wlan0 prefixlen 64 scopeid 0x4 >> inet 0.0.0.0 netmask 0xff00 broadcast 255.255.255.255 >> nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> >> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) >> status: no carrier >> ssid "" channel 2 (2417 MHz 11g ht/40+) >> regdomain FCC country US indoor ecm authmode WPA2/802.11i privacy ON >> deftxkey UNDEF txpower 30 bmiss 7 scanvalid 60 protmode CTS >> ampdulimit 8k ampdudensity 8 shortgi wme burst roaming MANUAL >> >> ifconfig ath0: >> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290 >> ether d0:53:49:91:6f:a1 >> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> >> media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng >> status: associated >> >> grep wpa /var/log/messages: >> ov 1 09:16:54 haymarket wpa_supplicant[389]: wlan0: Trying to associate >> with xx:xx:xx:xx:xx:xx (SSID='yy' freq=2417 MHz) >> Nov 1 09:16:54 haymarket wpa_supplicant[389]: wlan0: Associated with >> 60:e3:27:7b:e8:42 >> Nov 1 09:16:54 haymarket wpa_supplicant[389]: wlan0: WPA: Key >> negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=TKIP] >> Nov 1 09:16:54 haymarket wpa_supplicant[389]: wlan0: >> CTRL-EVENT-CONNECTED - Connection to xx:xx:xx:xx:xx:xx completed [id=1 >> id_str=] >> Nov 1 09:16:55 haymarket wpa_supplicant[389]: wlan0: WPA: Key >> negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=TKIP] >> Nov 1 09:16:56 haymarket wpa_supplicant[389]: wlan0: WPA: Key >> negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=TKIP] >> Nov 1 09:16:57 haymarket wpa_supplicant[389]: wlan0: WPA: Key >> negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=TKIP] >> Nov 1 09:16:57 haymarket wpa_supplicant[389]: wlan0: >> CTRL-EVENT-DISCONNECTED bssid=xx:xx:xx:xx:xx:xx reason=0 >> Nov 1 09:16:59 haymarket wpa_supplicant[389]: wlan0: Trying to >> associate with xx:xx:xx:xx:xx:xx (SSID='yy' freq=2417 MHz) >> Nov 1 09:17:09 haymarket wpa_supplicant[389]: wlan0: Authentication >> with xx:xx:xx:xx:xx:xx timed out. >> Nov 1 09:17:09 haymarket wpa_supplicant[389]: wlan0: >> CTRL-EVENT-DISCONNECTED bssid=xx:xx:xx:xx:xx:xx2 reason=3 >> locally_generated=1 >> Nov 1 09:18:13 haymarket wpa_supplicant[389]: wlan0: Trying to >> associate with xx:xx:xx:xx:xx:xx (SSID='yy' freq=2417 MHz >> >> etc. >> >> So how does ath0 get associated but not wlan0? -- George >> >> ___ >> freebsd-stable@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-stable >> To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" > ___ > freebsd-stable@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" > ___ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
Re: ath0 associated, wlan0 not associated
hi, can you please try freebsd-11.0 ? I fixed a whole bunch of bugs in the AR9380 HAL and it may have improved that device. Thanks! -a On 3 November 2016 at 07:09, George Mitchell <george+free...@m5p.com> wrote: > Originally posted to freebsd-wireless; no solution yet so I thought > I'd try here. After booting up, my ath0 interface says it is > associated, but my wlan0 says it is not: > > > FreeBSD 10.3-RELEASE-p11 > wpa_supplicant v2.0 > Copyright (c) 2003-2012, Jouni Malinen <j...@w1.fi> and contributors > > ath0@pci0:2:0:0:class=0x028000 card=0x064211ad chip=0x0036168c > rev=0x01 > hdr=0x00 > vendor = 'Qualcomm Atheros' > device = 'QCA9565 / AR9565 Wireless Network Adapter' > class = network > > grep wlan /etc/rc.conf: > create_args_wlan0="country US" > ifconfig_wlan0="WPA DHCP" > wlans_ath0="wlan0" > > And the result is: > > ifconfig wlan0: > wlan0: flags=8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST> metric > 0 mtu 1500 > ether d0:53:49:91:6f:a1 > inet6 fe80::d253:49ff:fe91:6fa1%wlan0 prefixlen 64 scopeid 0x4 > inet 0.0.0.0 netmask 0xff00 broadcast 255.255.255.255 > nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > status: no carrier > ssid "" channel 2 (2417 MHz 11g ht/40+) > regdomain FCC country US indoor ecm authmode WPA2/802.11i privacy ON > deftxkey UNDEF txpower 30 bmiss 7 scanvalid 60 protmode CTS > ampdulimit 8k ampdudensity 8 shortgi wme burst roaming MANUAL > > ifconfig ath0: > ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290 > ether d0:53:49:91:6f:a1 > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng > status: associated > > grep wpa /var/log/messages: > ov 1 09:16:54 haymarket wpa_supplicant[389]: wlan0: Trying to associate > with xx:xx:xx:xx:xx:xx (SSID='yy' freq=2417 MHz) > Nov 1 09:16:54 haymarket wpa_supplicant[389]: wlan0: Associated with > 60:e3:27:7b:e8:42 > Nov 1 09:16:54 haymarket wpa_supplicant[389]: wlan0: WPA: Key > negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=TKIP] > Nov 1 09:16:54 haymarket wpa_supplicant[389]: wlan0: > CTRL-EVENT-CONNECTED - Connection to xx:xx:xx:xx:xx:xx completed [id=1 > id_str=] > Nov 1 09:16:55 haymarket wpa_supplicant[389]: wlan0: WPA: Key > negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=TKIP] > Nov 1 09:16:56 haymarket wpa_supplicant[389]: wlan0: WPA: Key > negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=TKIP] > Nov 1 09:16:57 haymarket wpa_supplicant[389]: wlan0: WPA: Key > negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=TKIP] > Nov 1 09:16:57 haymarket wpa_supplicant[389]: wlan0: > CTRL-EVENT-DISCONNECTED bssid=xx:xx:xx:xx:xx:xx reason=0 > Nov 1 09:16:59 haymarket wpa_supplicant[389]: wlan0: Trying to > associate with xx:xx:xx:xx:xx:xx (SSID='yy' freq=2417 MHz) > Nov 1 09:17:09 haymarket wpa_supplicant[389]: wlan0: Authentication > with xx:xx:xx:xx:xx:xx timed out. > Nov 1 09:17:09 haymarket wpa_supplicant[389]: wlan0: > CTRL-EVENT-DISCONNECTED bssid=xx:xx:xx:xx:xx:xx2 reason=3 > locally_generated=1 > Nov 1 09:18:13 haymarket wpa_supplicant[389]: wlan0: Trying to > associate with xx:xx:xx:xx:xx:xx (SSID='yy' freq=2417 MHz > > etc. > > So how does ath0 get associated but not wlan0? -- George > > ___ > freebsd-stable@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" ___ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
ath0 associated, wlan0 not associated
Originally posted to freebsd-wireless; no solution yet so I thought I'd try here. After booting up, my ath0 interface says it is associated, but my wlan0 says it is not: FreeBSD 10.3-RELEASE-p11 wpa_supplicant v2.0 Copyright (c) 2003-2012, Jouni Malinen <j...@w1.fi> and contributors ath0@pci0:2:0:0:class=0x028000 card=0x064211ad chip=0x0036168c rev=0x01 hdr=0x00 vendor = 'Qualcomm Atheros' device = 'QCA9565 / AR9565 Wireless Network Adapter' class = network grep wlan /etc/rc.conf: create_args_wlan0="country US" ifconfig_wlan0="WPA DHCP" wlans_ath0="wlan0" And the result is: ifconfig wlan0: wlan0: flags=8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether d0:53:49:91:6f:a1 inet6 fe80::d253:49ff:fe91:6fa1%wlan0 prefixlen 64 scopeid 0x4 inet 0.0.0.0 netmask 0xff00 broadcast 255.255.255.255 nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier ssid "" channel 2 (2417 MHz 11g ht/40+) regdomain FCC country US indoor ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF txpower 30 bmiss 7 scanvalid 60 protmode CTS ampdulimit 8k ampdudensity 8 shortgi wme burst roaming MANUAL ifconfig ath0: ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether d0:53:49:91:6f:a1 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng status: associated grep wpa /var/log/messages: ov 1 09:16:54 haymarket wpa_supplicant[389]: wlan0: Trying to associate with xx:xx:xx:xx:xx:xx (SSID='yy' freq=2417 MHz) Nov 1 09:16:54 haymarket wpa_supplicant[389]: wlan0: Associated with 60:e3:27:7b:e8:42 Nov 1 09:16:54 haymarket wpa_supplicant[389]: wlan0: WPA: Key negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=TKIP] Nov 1 09:16:54 haymarket wpa_supplicant[389]: wlan0: CTRL-EVENT-CONNECTED - Connection to xx:xx:xx:xx:xx:xx completed [id=1 id_str=] Nov 1 09:16:55 haymarket wpa_supplicant[389]: wlan0: WPA: Key negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=TKIP] Nov 1 09:16:56 haymarket wpa_supplicant[389]: wlan0: WPA: Key negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=TKIP] Nov 1 09:16:57 haymarket wpa_supplicant[389]: wlan0: WPA: Key negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=TKIP] Nov 1 09:16:57 haymarket wpa_supplicant[389]: wlan0: CTRL-EVENT-DISCONNECTED bssid=xx:xx:xx:xx:xx:xx reason=0 Nov 1 09:16:59 haymarket wpa_supplicant[389]: wlan0: Trying to associate with xx:xx:xx:xx:xx:xx (SSID='yy' freq=2417 MHz) Nov 1 09:17:09 haymarket wpa_supplicant[389]: wlan0: Authentication with xx:xx:xx:xx:xx:xx timed out. Nov 1 09:17:09 haymarket wpa_supplicant[389]: wlan0: CTRL-EVENT-DISCONNECTED bssid=xx:xx:xx:xx:xx:xx2 reason=3 locally_generated=1 Nov 1 09:18:13 haymarket wpa_supplicant[389]: wlan0: Trying to associate with xx:xx:xx:xx:xx:xx (SSID='yyyyyy' freq=2417 MHz etc. So how does ath0 get associated but not wlan0? -- George ___ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"