I did some additional testing:
1) Installed 7.2-RC2 directly on the Perc 4e/Si H435 machine (RAID1)
from a cd, this went fine.
2) Turned off, and placed one drive in the machine with Perc 4e/Si H430,
boot went fine
Checked install of 7.1-RELEASE from cd on the 4e/Si H435 machine,
failed: no
Hello All,
I encountered the same problem as reported to this list earlier,
http://lists.freebsd.org/pipermail/freebsd-stable/2009-February/048305.html,
but then with 7.1-RELEASE-p4.
Interestingly enough, FreeBSD booted fine on the machine installed
(updated from 7.0 to 7.1-RELEASE-p4).
This
The just-released 7.2-RC2 should fix this problem. Please let me
know ASAP if it works for you.
Scott
Jeroen Hofstee wrote:
Hello All,
I encountered the same problem as reported to this list earlier,
http://lists.freebsd.org/pipermail/freebsd-stable/2009-February/048305.html,
but then with
I did the following to verify:
1) Installed 7.2-RC2 on the Perc 4e/Si H430 machine (RAID1), this went fine.
2) Turned off, and placed one drive in the machine with Perc 4e/Si H435,
boot went fine and no long delays after amr0
So the problem as I encountered with 7.1-RELEASE-p4 is not
On Wed, 2009-02-11 at 10:38 -0500, Brian A. Seklecki wrote:
There's already discussion about this in the archives. We're aware and
working on it.
Set:
/boo/loader.conf
kern.cam.scsi_delay=2
As a work-around for now.
Many thanks for your answer, it fixed the problem for now.
Now it
amr0: LSILogic PERC 4e/Si Firmware 521X, BIOS H430, 256MB RAM
amr0: delete logical drives supported by controller
Any time!
NOTE: You're using the 4e/Si, which we have as well. We're experiencing
random crashes on the 1850/8th gen, as a result of a (believed) DMA bug
introduced into 7.x
Brian A. Seklecki wrote:
NOTE: You're using the 4e/Si, which we have as well. We're experiencing
random crashes on the 1850/8th gen, as a result of a (believed) DMA bug
introduced into 7.x
Just to note, we are only seeing these issues in combination with megarc
(/usr/ports/sysutils/megarc)
Hello,
This afternoon I wanted to upgrade to 7.1 two good old dell PowerEdge
servers which were running FreeBSD 6.x. It went fine and quickly on the
poweredge 1950, but it failed completely on the poweredge 1850.
Facts:
- boot cd and setup / operation of freebsd 6.x or 7.0 is fine
Message
On Wed, 2009-02-11 at 15:51 +0100, Olivier Mueller wrote:
Hello,
This afternoon I wanted to upgrade to 7.1 two good old dell PowerEdge
servers which were running FreeBSD 6.x. It went fine and quickly on the
There's already discussion about this in the archives. We're aware and
working on
