webcamd and wacom
Hello, I see that freshports has posted an update to x11-driver/input-wacom. I've been trying to work on that myself, but it's been slow going, and I haven't made much progress. So I was happily surprised to see the update, and wanted to try it as soon as I could. I think I have everything installed and configured properly. I can see the /dev/input/event0 device, but when I start X it logs the following entries: # grep -i wacom /var/log/Xorg.0.log (II) LoadModule: wacom (II) Loading /usr/local/lib/xorg/modules/input/wacom_drv.so (II) Module wacom: vendor=X.Org Foundation (--) stylus: Wacom USB Bamboo tablet maxX=14720 maxY=9200 maxZ=1023 resX=10 resY=10 tilt=disabled (EE) stylus: Wacom X driver can't grab event device (Bad address) (--) eraser: Wacom USB Bamboo tablet maxX=14720 maxY=9200 maxZ=1023 resX=10 resY=10 tilt=disabled (EE) eraser: Wacom X driver can't grab event device (Bad address) (--) cursor: Wacom USB Bamboo tablet maxX=14720 maxY=9200 maxZ=1023 resX=10 resY=10 tilt=disabled (EE) cursor: Wacom X driver can't grab event device (Bad address) (--) pad: Wacom USB Bamboo tablet maxX=14720 maxY=9200 maxZ=1023 resX=10 resY=10 tilt=disabled (EE) pad: Wacom X driver can't grab event device (Bad address) (--) touch: Wacom USB Bamboo tablet maxX=14720 maxY=9200 maxZ=1023 resX=10 resY=10 tilt=disabled (EE) touch: Wacom X driver can't grab event device (Bad address) (II) UnloadModule: wacom (II) UnloadModule: wacom (II) UnloadModule: wacom (II) UnloadModule: wacom (II) UnloadModule: wacom # Does anyone have any idea what I'm missing here? cuse4bsd.ko is loaded, and webcamd is running. I'm not sure what else I can include that will be helpful, but if there is something else, let me know and I will supply it. Hopefully this will turn out to be something simple. Thanks, Denver ___ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
USB serial adapter, cu write: Device not configured
Hello people! I write you because I have got a problem with the uplcom driver on FreeBSD 9.0, I tried a lot of different things, read all I found, manpages, forums, irc, google but still not able to solve my problem. I need to connect to my remote Alix board, the remote console setup is 19200 8N1. I am using a short USB Prolific Tec.. serial cable adapter with a NULL modem cable, the last one plugged one side to the Alix board, the other side to the adapter cable. Under Linux Debian everything is fine, so the hardware and cables should be ok, under Linux I used minicom and cu and tip without problems. With FreeBSD and NetBSD, big problems..the result is always the same, I can receive but I cannot transmit. (working as root) *cu -t -s 19200 -l /dev/cuaU0 write: Device not configured (I can't transmit but I can receive the output if I reboot the remote alix board) *minicom test1 Cannot open /dev/ttyU0! test2 Cannot open /dev/cuaU0! (in a popup box) # A bit of my enviroment and some command output (commands by root): I am using FreeBSD 9.0 with kernel and world compiled today with the last source updated with csup. The laptop is a Lenovo IBM Thinkpad T61. 4Gbyte of RAM, HD 40% used. Shell bash, X graphical enviroment with Fluxbox, the problem exist even within the shell without load Xorg. * usbconfig -d ugen1.2 show_ifdrv ugen1.2: USB 2.0 To COM Device Prolific Technology Inc. at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen1.2.0: uplcom0: Prolific Technology Inc. USB 2.0 To COM Device, class 0/0, rev 1.10/3.00, addr 2 * usbconfig -d ugen1.2 dump_device_desc ugen1.2: USB 2.0 To COM Device Prolific Technology Inc. at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x bDeviceSubClass = 0x bDeviceProtocol = 0x bMaxPacketSize0 = 0x0040 idVendor = 0x067b idProduct = 0x2303 bcdDevice = 0x0300 iManufacturer = 0x0001 Prolific Technology Inc. iProduct = 0x0002 USB 2.0 To COM Device iSerialNumber = 0x no string bNumConfigurations = 0x0001 * dmesg when I connect the cable: ugen1.2: Prolific Technology Inc. at usbus1 uplcom0: Prolific Technology Inc. USB 2.0 To COM Device, class 0/0, rev 1.10/3.00, addr 2 on usbus1 * KLDSTAT Id Refs AddressSize Name 1 36 0x8020 d58c20 kernel 31 0x80f6c000 104ab40 nvidia.ko 44 0x81fb7000 45218linux.ko 51 0x82212000 13300f zfs.ko 61 0x82346000 2fb5 opensolaris.ko 71 0x82349000 3d5d linprocfs.ko 81 0x8234d000 24c19wpifw.ko 101 0x82374000 2a4c1pf.ko 111 0x8239f000 762 rtc.ko 121 0x82372000 1fd5 uplcom.ko * stty -a -f /dev/cuaU0 speed 9600 baud; 0 rows; 0 columns; lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl -echoprt -altwerase -noflsh -tostop -flusho -pendin -nokerninfo -extproc iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel -ignbrk brkint -inpck -ignpar -parmrk oflags: opost onlcr -ocrnl tab0 -onocr -onlret cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb -crtscts -dsrflow -dtrflow -mdmbuf cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = undef; eol2 = undef; erase = ^?; erase2 = ^H; intr = ^C; kill = ^U; lnext = ^V; min = 1; quit = ^\; reprint = ^R; start = ^Q; status = ^T; stop = ^S; susp = ^Z; time = 0; werase = ^W; I tried to change the above parameters with stty by hand using cuaU0, cuaU0.init and cuaU0.lock before using cu, tip and minicom. I tried different combinations to the parameters of the connections but still the problem persist. My problem is exactly the same to that reported here: http://lists.freebsd.org/pipermail/freebsd-usb/2011-July/010443.html If I try to do: sysctl hw.usb.ucom.debug=15 I see in dmesg after cu -t -s 19200 -l /dev/cuaU0: ucom_attach_tty: ttycreate: U0 ucom_attach: tp = 0xfe0005e08800, unit = 0, subunits = 1 ucom_open: tp = 0xfe0005e08800 ucom_dtr: onoff = 1 ucom_line_state: on=0x01, off=0x00 ucom_rts: onoff = 1 ucom_line_state: on=0x02, off=0x00 ucom_ring: onoff = 0 ucom_line_state: on=0x00, off=0x08 ucom_break: onoff = 0 ucom_line_state: on=0x00, off=0x04 ucom_status_change: ucom_param: sc = 0xfe0005106880 ucom_dtr: onoff = 1 ucom_line_state: on=0x01, off=0x00 ucom_rts: onoff = 1 ucom_line_state: on=0x02, off=0x00 ucom_cfg_open: ucom_ioctl: cmd = 0x402c7413 ucom_ioctl: cmd = 0x802c7416 ucom_ioctl: cmd = 0x2000740d ucom_ioctl: cmd = 0x402c7413 ucom_ioctl: cmd = 0x802c7416 ucom_param: sc = 0xfe0005106880 ucom_ioctl: cmd = 0x8004667e ucom_ioctl: cmd = 0x8004667d ucom_status_change: ucom_status_change: ucom_get_data: cnt=0 ucom_outwakeup: sc = 0xfe0005106880 ucom_get_data: cnt=1 ucom_outwakeup: sc = 0xfe0005106880 ucom_outwakeup: sc = 0xfe0005106880 uplcom0: at uhub1, port 1, addr 2 (disconnected) ucom_detach_tty: sc =
Re: USB serial adapter, cu write: Device not configured
dear Warren, I did everything you write me but even using devfs.rules or by hand modify the ownership or write permission, or using the root user, it doesn't work. These are the rules activated by rc.conf with: devfs_system_ruleset=usb_devices cat /etc/devfs.rules [usb_devices=10] add path 'ugen*' mode 0777 user seaman group dialer add path 'ttyU*' mode 0777 user seaman group dialer add path 'usb/*' mode 0777 user seaman group dialer add path 'ums*' mode 0777 user seaman group usb add path 'cuaU*' mode 0777 user seaman group dialer add path 'da*s*' mode 0660 group usb I put 7 just to be sure to try everything.. normally I just need rw permissions. Thank you FabioDive On Sun, Mar 18, 2012 at 18:32, Fabio Dive fabiod...@gmail.com wrote: Hello people! I write you because I have got a problem with the uplcom driver on FreeBSD 9.0, I tried a lot of different things, read all I found, manpages, forums, irc, google but still not able to solve my problem. I need to connect to my remote Alix board, the remote console setup is 19200 8N1. I am using a short USB Prolific Tec.. serial cable adapter with a NULL modem cable, the last one plugged one side to the Alix board, the other side to the adapter cable. Under Linux Debian everything is fine, so the hardware and cables should be ok, under Linux I used minicom and cu and tip without problems. With FreeBSD and NetBSD, big problems..the result is always the same, I can receive but I cannot transmit. (working as root) *cu -t -s 19200 -l /dev/cuaU0 write: Device not configured (I can't transmit but I can receive the output if I reboot the remote alix board) *minicom test1 Cannot open /dev/ttyU0! test2 Cannot open /dev/cuaU0! (in a popup box) # A bit of my enviroment and some command output (commands by root): I am using FreeBSD 9.0 with kernel and world compiled today with the last source updated with csup. The laptop is a Lenovo IBM Thinkpad T61. 4Gbyte of RAM, HD 40% used. Shell bash, X graphical enviroment with Fluxbox, the problem exist even within the shell without load Xorg. * usbconfig -d ugen1.2 show_ifdrv ugen1.2: USB 2.0 To COM Device Prolific Technology Inc. at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen1.2.0: uplcom0: Prolific Technology Inc. USB 2.0 To COM Device, class 0/0, rev 1.10/3.00, addr 2 * usbconfig -d ugen1.2 dump_device_desc ugen1.2: USB 2.0 To COM Device Prolific Technology Inc. at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x bDeviceSubClass = 0x bDeviceProtocol = 0x bMaxPacketSize0 = 0x0040 idVendor = 0x067b idProduct = 0x2303 bcdDevice = 0x0300 iManufacturer = 0x0001 Prolific Technology Inc. iProduct = 0x0002 USB 2.0 To COM Device iSerialNumber = 0x no string bNumConfigurations = 0x0001 * dmesg when I connect the cable: ugen1.2: Prolific Technology Inc. at usbus1 uplcom0: Prolific Technology Inc. USB 2.0 To COM Device, class 0/0, rev 1.10/3.00, addr 2 on usbus1 * KLDSTAT Id Refs Address Size Name 1 36 0x8020 d58c20 kernel 3 1 0x80f6c000 104ab40 nvidia.ko 4 4 0x81fb7000 45218 linux.ko 5 1 0x82212000 13300f zfs.ko 6 1 0x82346000 2fb5 opensolaris.ko 7 1 0x82349000 3d5d linprocfs.ko 8 1 0x8234d000 24c19 wpifw.ko 10 1 0x82374000 2a4c1 pf.ko 11 1 0x8239f000 762 rtc.ko 12 1 0x82372000 1fd5 uplcom.ko * stty -a -f /dev/cuaU0 speed 9600 baud; 0 rows; 0 columns; lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl -echoprt -altwerase -noflsh -tostop -flusho -pendin -nokerninfo -extproc iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel -ignbrk brkint -inpck -ignpar -parmrk oflags: opost onlcr -ocrnl tab0 -onocr -onlret cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb -crtscts -dsrflow -dtrflow -mdmbuf cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = undef; eol2 = undef; erase = ^?; erase2 = ^H; intr = ^C; kill = ^U; lnext = ^V; min = 1; quit = ^\; reprint = ^R; start = ^Q; status = ^T; stop = ^S; susp = ^Z; time = 0; werase = ^W; I tried to change the above parameters with stty by hand using cuaU0, cuaU0.init and cuaU0.lock before using cu, tip and minicom. I tried different combinations to the parameters of the connections but still the problem persist. My problem is exactly the same to that reported here: http://lists.freebsd.org/pipermail/freebsd-usb/2011-July/010443.html If I try to do: sysctl hw.usb.ucom.debug=15 I see in dmesg after cu -t -s 19200 -l /dev/cuaU0: ucom_attach_tty: ttycreate: U0 ucom_attach: tp = 0xfe0005e08800, unit = 0, subunits = 1 ucom_open: tp = 0xfe0005e08800 ucom_dtr: onoff = 1 ucom_line_state: on=0x01, off=0x00 ucom_rts: onoff =
