Hans Petter Selasky wrote:
> On 5/9/21 11:25 PM, Oliver Fromme wrote:
> > 22:56:30.540897 usbus1.5 SUBM-CTRL-EP=,SPD=FULL,NFR=1,SLEN=8,IVAL=0
> > frame[0] WRITE 8 bytes
> > 21 0B 01 00 00 00 00 00 -- -- -- -- -- -- -- -- |!...
&g
Hans Petter Selasky wrote:
> On 5/7/21 7:29 PM, Oliver Fromme wrote:
> > I've bought a 7" touchscreen. It's intended for an RPi, but
> > it can also be connected to a standard PC via HDMI + USB,
> > which is what I do. Vendor & product ID is 0x0416 & 0xc
bmAttributes = 0x0003
wMaxPacketSize = 0x0040
bInterval = 0x0008
bRefresh = 0x
bSynchAddress = 0x
--
Oliver Fromme, Munich
``We are all but compressed light'' - Albert Einstein
___
freebsd-usb@freebsd.org
: This disk uses 4096 bytes per sector, so you
cannot use fdisk, and my mainboard would probably be unable
to boot from this disk (which is not a problem for me,
because I don't intend to use this particular disk as a
boot device).
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG
without a panic, so this isn't 100% reproducable.
Also, I'm reluctant to try again because this is a quite
important production server.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606
to
find a good FM so far. :-)
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758
,
scanning mode and size. I'll need to investigate what's
causing this.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister
Hans Petter Selasky wrote:
On Friday 19 December 2008, Oliver Fromme wrote:
Unfortunately, the scanner attaches to ugen, not uscanner.
So there is no /dev/uscanner*, so SANE doesn't find it. :-(
The scanner is listed in uscanner2.c, product ID and
vendor ID match. Looks like
message). Trying to set any other config number results
in I/O error after a few seconds.
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister
Warren Block wrote:
Oliver Fromme wrote:
As I wrote recently, the scanner attaches to ugen instead
of uscanner. There is no device in /dev,
My Epson will work with SANE as either uscanner0 or ugen0. uscanner0 is
the normal way, but ugen0 lets the scanner's single button
do, except for forgetting about
this scanner alltogether?
(The scanner does have an LPT connector, but the computer
does not. I assume that the scanner wouldn't work with a
USB-printer adapter either, because SANE probably only
works with real LPT ports.)
Best regards
Oliver
--
Oliver
Hans Petter Selasky wrote:
On Friday 12 December 2008, Oliver Fromme wrote:
usb2_alloc_device:
You could try to edit the code in sys/dev/usb2/core/usb2_device.c and loop
two times on the set_config command in usb2_alloc_device().
Or you can try to make the code ignore the return
Luigi Rizzo wrote:
On Fri, Dec 12, 2008 at 09:27:27PM +0100, Oliver Fromme wrote:
Hi,
I've got a HP ScanJet 4300C that seems to be a little bit
stubborn.
...
Is there anything I can do, except for forgetting about
this scanner alltogether?
one option is to put
The following reply was made to PR usb/85067; it has been noted by GNATS.
From: Oliver Fromme [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc:
Subject: Re: usb/85067: [uscanner] Cannot attach ScanJet 4300C to usb device
Date: Fri, 23 May 2008 10:02:15 +0200 (CEST)
Just a small follow-up
Oliver Fromme wrote:
I have bought a HP ScanJet 4300C, specifically because
this very scanner is listed in FreeBSD's uscanner(4)
manpage and in SANE's list of supported USB scanners.
However, this is all I get:
uscanner0: vendor 0x03f0 product 0x0305, class 0/0, rev 1.00/0.00, addr
with an ALI chip on it, it is 8 EUR (~ 5.70 USD), with
otherwise the same specs (4 ext. ports, 1 int. port).
There are also more expensive cards which also feature
firewire ports, also based on VIA or ALI chips.
Any recommendations?
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG
this scanner to work somehow.
Best regards
Oliver
--
Oliver Fromme, secnetix GmbH Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758
17 matches
Mail list logo