Hi, Environment: FreeBSD 10.0-RELEASE/amd64 on Lenovo IdeaPad S400.
SD Card Reader visible by usbconfig: ugen1.4: <USB2.0-CRW Generic> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) usbconfig info: bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x00ff bDeviceSubClass = 0x00ff bDeviceProtocol = 0x00ff bMaxPacketSize0 = 0x0040 idVendor = 0x0bda idProduct = 0x0129 bcdDevice = 0x3960 iManufacturer = 0x0001 <Generic> iProduct = 0x0002 <USB2.0-CRW> iSerialNumber = 0x0003 <20100201396000000> bNumConfigurations = 0x0001 Adding/removing SD card yields nothing. The same with booting with SD card and/or turning power on/off with usbconfig. If I add this to /usr/src/sys/dev/usb/usbdevs product REALTEK USB20CRW_T 0x0129 USB20CRW Card Reader - nothing changes. If I add these quirks to /usr/src/sys/dev/usb/quirk/usb_quirk.c USB_QUIRK(REALTEK, USB20CRW_T, 0x0000, 0xffff, UQ_MSC_NO_GETMAXLUN, UQ_MSC_FORCE_WIRE_BBB, UQ_MSC_FORCE_PROTO_SCSI) then I get: umass0: <Bulk-In, Bulk-Out, Interface> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:3:0:-1: Attached to scbus3 ... (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command ... (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted Adding the 'UQ_MSC_NO_SYNC_CACHE" quirk changes nothing. Does anybody know what should be done and is it possible at all to use this card reader with FreeBSD 10.0? Ivan _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"