Re: USB3 SATA enclosure

2012-12-13 Thread Mike Tancsa
On 12/13/2012 2:24 AM, Hans Petter Selasky wrote: Hi, There is an error message there: xhci0: NEC uPD720200 USB 3.0 controller mem 0xfb90-0xfb901fff irq 18 at device 0.0 on pci4 usbus1: waiting for BIOS to give up control usbus1: timed out waiting for BIOS 1) Can you turn off USB

Re: USB3 SATA enclosure

2012-12-12 Thread Mike Tancsa
On 12/12/2012 2:54 AM, Hans Petter Selasky wrote: Try to tune these up, one by one. I doubled them all, and still only 0(cage)# usbconfig ugen0.1: EHCI root HUB Intel at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.1: XHCI root HUB 0x1033 at usbus1, cfg=0 md=HOST spd=SUPER

Re: USB3 SATA enclosure

2012-12-12 Thread Hans Petter Selasky
On Wednesday 12 December 2012 13:44:27 Mike Tancsa wrote: On 12/12/2012 2:54 AM, Hans Petter Selasky wrote: Try to tune these up, one by one. I doubled them all, and still only 0(cage)# usbconfig ugen0.1: EHCI root HUB Intel at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE

Re: USB3 SATA enclosure

2012-12-12 Thread Julian H. Stacey
I have one. It achieves what is expected from USB3. But it was not recognised at the beginning. I have a USB3 enclosure that works at USB2 unless I remove the extension cable add external power, then it's USB3 :-) Cheers, Julian -- Julian Stacey, BSD Unix Linux C Sys Eng Consultant, Munich

Re: USB3 SATA enclosure

2012-12-12 Thread Mike Tancsa
On 12/12/2012 7:53 AM, Hans Petter Selasky wrote: There are some patches for the XHCI I want to backport to 9-stable, but they are not ready yet, due to depending patches and testing. Do you have the possibility to install a 10-current kernel and see if the device is detected correctly

Re: USB3 SATA enclosure

2012-12-12 Thread Hans Petter Selasky
Hi, There is an error message there: xhci0: NEC uPD720200 USB 3.0 controller mem 0xfb90-0xfb901fff irq 18 at device 0.0 on pci4 usbus1: waiting for BIOS to give up control usbus1: timed out waiting for BIOS 1) Can you turn off USB legacy support in the BIOS? 2) Can you boot with

Re: USB3 SATA enclosure

2012-12-11 Thread Mike Tancsa
On 12/11/2012 2:18 AM, Hans Petter Selasky wrote: As I use it only randomly, I have had to notice that it is not recognised as USB3 on 10. either anymore. Something got changed which stopped it from working. We've only changed some reset timings. See: sysctl -a hw.usb

Re: USB3 SATA enclosure

2012-12-11 Thread Hans Petter Selasky
On Tuesday 11 December 2012 12:34:11 Mike Tancsa wrote: hw.usb.timings.extra_power_up_time: 20 hw.usb.timings.resume_recovery: 50 hw.usb.timings.resume_wait: 50 hw.usb.timings.resume_delay: 250 hw.usb.timings.set_address_settle: 10 hw.usb.timings.port_resume_delay: 40

Re: USB3 SATA enclosure

2012-12-11 Thread Mike Tancsa
On 12/11/2012 6:49 AM, Hans Petter Selasky wrote: On Tuesday 11 December 2012 12:34:11 Mike Tancsa wrote: hw.usb.timings.extra_power_up_time: 20 hw.usb.timings.resume_recovery: 50 hw.usb.timings.resume_wait: 50 hw.usb.timings.resume_delay: 250 hw.usb.timings.set_address_settle: 10

Re: USB3 SATA enclosure

2012-12-11 Thread Hans Petter Selasky
On Tuesday 11 December 2012 16:48:13 Mike Tancsa wrote: On 12/11/2012 6:49 AM, Hans Petter Selasky wrote: On Tuesday 11 December 2012 12:34:11 Mike Tancsa wrote: hw.usb.timings.extra_power_up_time: 20 hw.usb.timings.resume_recovery: 50 hw.usb.timings.resume_wait: 50

Re: USB3 SATA enclosure

2012-12-10 Thread Erich Dollansky
Hi, On Mon, 10 Dec 2012 16:29:29 -0500 Mike Tancsa m...@sentex.net wrote: I picked up a USB3 sata enclosure and was surprised at the low speeds I was getting. I should probably just stick with eSata instead, but has anyone got any decent throughput on USB3 drives ? I have one. It achieves

Re: USB3 SATA enclosure

2012-12-10 Thread Hans Petter Selasky
On Tuesday 11 December 2012 01:27:07 Erich Dollansky wrote: Hi, On Mon, 10 Dec 2012 16:29:29 -0500 Mike Tancsa m...@sentex.net wrote: I picked up a USB3 sata enclosure and was surprised at the low speeds I was getting. I should probably just stick with eSata instead, but has anyone