*****SPAM***** RE: usb/175551: Seagate 2TB USB extern hard disk have errors with freeBSD
Hello Hans Petter, thank you for your response. I want answer your questions - sorry for the late reply: 1) Does the drive have separate power connected? A: Yes 2) Have you tried using the disk at USB 2.0 by disabling USB 3.0 in the BIOS A: I used for this a very old PC, a Hewlett-Packard HP Vectra VL60 with Intel Pentium III (Copermine) 733Mhz / 256MB RAM / Mainboard D8611-60001 Board-S/N:FR02632024 / PhoenixBOIS 4.0 Release6.0.L / 1985-2000 Hewellt Packard Rev, Version: HY.01.07 (15 Jan 2002) It has no USB 3.0, nor can boot from USB. 3) Have you tried setting hw.usb.umass.throttle to 1,4 or 16, which is available in 9-stable, when options USB_DEBUG is enable. A: No - I have not known that. But I believe that my pc is more to slow than to fast. 4) The CAM layer hang you are experiencing is possibly fixed in 10-current. - fine, I will give it a try when 10-current becomes 10-release. Thank you for give me the information that it is a CAM layer hang - whatever this is. So it is not my fault. I now used another (older) external 320 GB USB hard drive. With that I get no problems (making partitions, formatting,..) With best regards, Harald Langner _ Dipl.-Ing. (FH) Harald E. Langner - Software-Developer - eMail: mailto:harald.lang...@web.de Url: http://www.swdevil.de http://www.langner.net Phone: +49 (69) 383 575 Telefax: +49 (69) 3877 8692 Mobile: +49 (179) 617 90 80 Address: Auf der Beun, No. 20 D - 65 933 Frankfurt at Main EUROPE (Germany) -Original Message- From: Hans Petter Selasky [mailto:hsela...@c2i.net] Sent: Friday, January 25, 2013 11:33 PM To: freebsd-usb@freebsd.org Cc: Harald Langner; freebsd-gnats-sub...@freebsd.org Subject: Re: usb/175551: Seagate 2TB USB extern hard disk have errors with freeBSD On Thursday 24 January 2013 23:11:48 Harald Langner wrote: Number: 175551 Category: usb Synopsis: Seagate 2TB USB extern hard disk have errors with freeBSD Confidential: no Severity: non-critical Priority: low Responsible:freebsd-usb State: open Quarter: Keywords: Date-Required: Class: sw-bug Submitter-Id: current-users Arrival-Date: Thu Jan 24 22:20:00 UTC 2013 Closed-Date: Last-Modified: Originator: Harald Langner Release:9.1 Release Organization: Environment: FreeBSD haraldlangner.de 9.1-RELEASE FreeBSD 9.1-RELEASE #0: Wed Jan 9 18:13:51 CET 2013 r...@haraldlangner.de:/usr/obj/usr/src/sys/GENERIC i386 Description: it seems to be a driver sw-bug I had tried to use an external Seagate 2 TB USB 3.0 hard disk, and want to format the third partition on it with FreeBSD. But I had have no look. So I step to the forum to get help. But no help was possible. It seems to be a hardware problem between this Seagate Plus Desktop Drive: http://www.seagate.com/external-hard-drives/desktop-hard-drives/backup -plu s-desk/ and freeBSD. The last poster in the forum http://forums.freebsd.org/showthread.php?t=36938 commend me to post a problem report - so I want to do here. I had try different things (see the post above). Everey time the USB-Disk hangs up. On Windows I got no problems with this Seagate USB drive. I have tried serval time to format a bevore created partition with freeBSD - no look: # newfs /dev/da0s3 /dev/da0s3: 267264.0MB (547356656 sectors) block size 32768, fragment size 4096 using 362 cylinder groups of 740.00MB, 23680 blks, 47360 inodes. super-block backups (for fsck -b #) at: 192, 1515712, 3031232, 4546752, 6062272, 7577792, 9093312, 10608832, 12124352, 13639872, 15155392, 16670912, 18186432, 19701952, 21217472, 22732992, 24248512, 25764032, 27279552, 28795072, 30310592, 31826112, 33341632, 34857152, 36372672, 37888192, 39403712, 40919232, 42434752, 43950272, 45465792, 46981312, 48496832, 50012352, 51527872, 53043392, 54558912, 56074432, 57589952, 59105472, 60620992, ---Here it hangs - and I have to switch of the PC. I thing I give up with this Seagte USB device. I had also created a FAT32 partition (in the 3. Partition as described in the post) with a second Windows PC. Copy some data on it and try to mount it with the freeBSD PC. # mount -t msdosfs -o large /dev/da0s3 /mnt/bckup Same Problem - it hangs: Here are the error message that cames up, when it hangs, on console: (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 c8 32 5d 28 0 0 8 0 (da0:umass-sim0:0:0:0): CAM status: CCB reques completed with an error (da0:umass-sim0:0:0:0): Retrying command ugen0.2: Seagate at usbus0 (disconnected) umass0: at uhub0, port 1, addr 2 (disconnected) (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 c8 32 5d 28 0 0 8 0 (da0:umass-sim0:0:0:0): CAM status: CCB reques completed with an error (da0:umass-sim0:0:0:0): Retrying command (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 c8 32 5d 28 0 0 8 0 (da0:umass-sim0:0:0:0
Re: usb/175703: Re: usb/175551: Seagate 2TB USB extern hard disk have errors with freeBSD
Old Synopsis: *SPAM* FW: usb/175551: Seagate 2TB USB extern hard disk have errors with freeBSD New Synopsis: Re: usb/175551: Seagate 2TB USB extern hard disk have errors with freeBSD State-Changed-From-To: open-closed State-Changed-By: linimon State-Changed-When: Thu Jan 31 07:33:49 UTC 2013 State-Changed-Why: Misfiled followup to usb/175551usb/175551usb/175551usb/175551usb/175551usb/175551usb/175551usb/175551usb/175551; content migrated. Responsible-Changed-From-To: gnats-admin-freebsd-usb Responsible-Changed-By: linimon Responsible-Changed-When: Thu Jan 31 07:33:49 UTC 2013 Responsible-Changed-Why: http://www.freebsd.org/cgi/query-pr.cgi?pr=175703 ___ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
Re: usb/175551: Seagate 2TB USB extern hard disk have errors with freeBSD
On Thursday 24 January 2013 23:11:48 Harald Langner wrote: Number: 175551 Category: usb Synopsis: Seagate 2TB USB extern hard disk have errors with freeBSD Confidential: no Severity: non-critical Priority: low Responsible:freebsd-usb State: open Quarter: Keywords: Date-Required: Class: sw-bug Submitter-Id: current-users Arrival-Date: Thu Jan 24 22:20:00 UTC 2013 Closed-Date: Last-Modified: Originator: Harald Langner Release:9.1 Release Organization: Environment: FreeBSD haraldlangner.de 9.1-RELEASE FreeBSD 9.1-RELEASE #0: Wed Jan 9 18:13:51 CET 2013 r...@haraldlangner.de:/usr/obj/usr/src/sys/GENERIC i386 Description: it seems to be a driver sw-bug I had tried to use an external Seagate 2 TB USB 3.0 hard disk, and want to format the third partition on it with FreeBSD. But I had have no look. So I step to the forum to get help. But no help was possible. It seems to be a hardware problem between this Seagate Plus Desktop Drive: http://www.seagate.com/external-hard-drives/desktop-hard-drives/backup-plu s-desk/ and freeBSD. The last poster in the forum http://forums.freebsd.org/showthread.php?t=36938 commend me to post a problem report - so I want to do here. I had try different things (see the post above). Everey time the USB-Disk hangs up. On Windows I got no problems with this Seagate USB drive. I have tried serval time to format a bevore created partition with freeBSD - no look: # newfs /dev/da0s3 /dev/da0s3: 267264.0MB (547356656 sectors) block size 32768, fragment size 4096 using 362 cylinder groups of 740.00MB, 23680 blks, 47360 inodes. super-block backups (for fsck -b #) at: 192, 1515712, 3031232, 4546752, 6062272, 7577792, 9093312, 10608832, 12124352, 13639872, 15155392, 16670912, 18186432, 19701952, 21217472, 22732992, 24248512, 25764032, 27279552, 28795072, 30310592, 31826112, 33341632, 34857152, 36372672, 37888192, 39403712, 40919232, 42434752, 43950272, 45465792, 46981312, 48496832, 50012352, 51527872, 53043392, 54558912, 56074432, 57589952, 59105472, 60620992, ---Here it hangs - and I have to switch of the PC. I thing I give up with this Seagte USB device. I had also created a FAT32 partition (in the 3. Partition as described in the post) with a second Windows PC. Copy some data on it and try to mount it with the freeBSD PC. # mount -t msdosfs -o large /dev/da0s3 /mnt/bckup Same Problem - it hangs: Here are the error message that cames up, when it hangs, on console: (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 c8 32 5d 28 0 0 8 0 (da0:umass-sim0:0:0:0): CAM status: CCB reques completed with an error (da0:umass-sim0:0:0:0): Retrying command ugen0.2: Seagate at usbus0 (disconnected) umass0: at uhub0, port 1, addr 2 (disconnected) (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 c8 32 5d 28 0 0 8 0 (da0:umass-sim0:0:0:0): CAM status: CCB reques completed with an error (da0:umass-sim0:0:0:0): Retrying command (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 c8 32 5d 28 0 0 8 0 (da0:umass-sim0:0:0:0): CAM status: Section Timeout (da0:umass-sim0:0:0:0): Retrying command (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 c8 32 5d 28 0 0 8 0 (da0:umass-sim0:0:0:0): CAM status: Section Timeout (da0:umass-sim0:0:0:0): Retrying command (da0:umass-sim0:0:0:0): lost device - 1 outstanding, 2 refs (da0:umass-sim0:0:0:0): outstanding 0 (pass3:da0:umass-sim0:0:0:0): passdevgonecb devfs entry is gone Here the system hang up. I have to press the power knobe for a new boot. I found in the sources cam.c where the messages seems to be made: http://svn.freebsd.org/base/user/eri/pf45/head/sys/cam/cam.c and this info: http://bintree.net/freebsd/de/de1/cam_8c.html. But i dislike to grubber deeper, what it could be. Maybe my information about the error will give the developer of cam.c (and code around) some ideas how Seagates hard disks can get to work with freeBSD. If there are any questions left, please ask me. Whish you all best Harald How-To-Repeat: Take the Seagate Plus Desktop Drive - try to format it - or copy some data on it, use it. I have buyed this Seagate Plus Desktop because it should work also with MAC. And Mac kernel is a freeBSD System - right? But maybe MAC and Windows have different driver. Also it was written that the Seagate should be upwarts compatible. Because my old PC (freeBSD) has only USB 2.0 or USB 1.0. Fix: take another USB drive Hi, 1) Does the drive have separate power connected? 2) Have you tried using the disk at USB 2.0 by disabling USB 3.0 in the BIOS 3) Have you tried setting hw.usb.umass.throttle to 1,4 or 16, which is available in 9-stable, when options USB_DEBUG is enable. The CAM layer hang you are experiencing is possibly fixed in 10-current. It is not a USB fault. --HPS ___ freebsd-usb@freebsd.org mailing list
Re: usb/175551: Seagate 2TB USB extern hard disk have errors with freeBSD
The following reply was made to PR usb/175551; it has been noted by GNATS. From: Hans Petter Selasky hsela...@c2i.net To: freebsd-usb@freebsd.org Cc: Harald Langner developm...@langner.net, freebsd-gnats-sub...@freebsd.org Subject: Re: usb/175551: Seagate 2TB USB extern hard disk have errors with freeBSD Date: Fri, 25 Jan 2013 23:32:32 +0100 On Thursday 24 January 2013 23:11:48 Harald Langner wrote: Number: 175551 Category: usb Synopsis: Seagate 2TB USB extern hard disk have errors with freeBSD Confidential: no Severity: non-critical Priority: low Responsible:freebsd-usb State: open Quarter: Keywords: Date-Required: Class: sw-bug Submitter-Id: current-users Arrival-Date: Thu Jan 24 22:20:00 UTC 2013 Closed-Date: Last-Modified: Originator: Harald Langner Release:9.1 Release Organization: Environment: FreeBSD haraldlangner.de 9.1-RELEASE FreeBSD 9.1-RELEASE #0: Wed Jan 9 18:13:51 CET 2013 r...@haraldlangner.de:/usr/obj/usr/src/sys/GENERIC i386 Description: it seems to be a driver sw-bug I had tried to use an external Seagate 2 TB USB 3.0 hard disk, and want to format the third partition on it with FreeBSD. But I had have no look. So I step to the forum to get help. But no help was possible. It seems to be a hardware problem between this Seagate Plus Desktop Drive: http://www.seagate.com/external-hard-drives/desktop-hard-drives/backup-plu s-desk/ and freeBSD. The last poster in the forum http://forums.freebsd.org/showthread.php?t=36938 commend me to post a problem report - so I want to do here. I had try different things (see the post above). Everey time the USB-Disk hangs up. On Windows I got no problems with this Seagate USB drive. I have tried serval time to format a bevore created partition with freeBSD - no look: # newfs /dev/da0s3 /dev/da0s3: 267264.0MB (547356656 sectors) block size 32768, fragment size 4096 using 362 cylinder groups of 740.00MB, 23680 blks, 47360 inodes. super-block backups (for fsck -b #) at: 192, 1515712, 3031232, 4546752, 6062272, 7577792, 9093312, 10608832, 12124352, 13639872, 15155392, 16670912, 18186432, 19701952, 21217472, 22732992, 24248512, 25764032, 27279552, 28795072, 30310592, 31826112, 33341632, 34857152, 36372672, 37888192, 39403712, 40919232, 42434752, 43950272, 45465792, 46981312, 48496832, 50012352, 51527872, 53043392, 54558912, 56074432, 57589952, 59105472, 60620992, ---Here it hangs - and I have to switch of the PC. I thing I give up with this Seagte USB device. I had also created a FAT32 partition (in the 3. Partition as described in the post) with a second Windows PC. Copy some data on it and try to mount it with the freeBSD PC. # mount -t msdosfs -o large /dev/da0s3 /mnt/bckup Same Problem - it hangs: Here are the error message that cames up, when it hangs, on console: (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 c8 32 5d 28 0 0 8 0 (da0:umass-sim0:0:0:0): CAM status: CCB reques completed with an error (da0:umass-sim0:0:0:0): Retrying command ugen0.2: Seagate at usbus0 (disconnected) umass0: at uhub0, port 1, addr 2 (disconnected) (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 c8 32 5d 28 0 0 8 0 (da0:umass-sim0:0:0:0): CAM status: CCB reques completed with an error (da0:umass-sim0:0:0:0): Retrying command (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 c8 32 5d 28 0 0 8 0 (da0:umass-sim0:0:0:0): CAM status: Section Timeout (da0:umass-sim0:0:0:0): Retrying command (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 c8 32 5d 28 0 0 8 0 (da0:umass-sim0:0:0:0): CAM status: Section Timeout (da0:umass-sim0:0:0:0): Retrying command (da0:umass-sim0:0:0:0): lost device - 1 outstanding, 2 refs (da0:umass-sim0:0:0:0): outstanding 0 (pass3:da0:umass-sim0:0:0:0): passdevgonecb devfs entry is gone Here the system hang up. I have to press the power knobe for a new boot. I found in the sources cam.c where the messages seems to be made: http://svn.freebsd.org/base/user/eri/pf45/head/sys/cam/cam.c and this info: http://bintree.net/freebsd/de/de1/cam_8c.html. But i dislike to grubber deeper, what it could be. Maybe my information about the error will give the developer of cam.c (and code around) some ideas how Seagates hard disks can get to work with freeBSD. If there are any questions left, please ask me. Whish you all best Harald How-To-Repeat: Take the Seagate Plus Desktop Drive - try to format it - or copy some data on it, use it. I have buyed this Seagate Plus Desktop because it should work also with MAC. And Mac kernel is a freeBSD System - right? But maybe MAC and Windows have different driver. Also it was written that the Seagate should be upwarts compatible. Because my old PC (freeBSD) has only USB 2.0 or USB 1.0. Fix: take another USB drive Hi, 1) Does