On 05/10/14 02:28, Nikolai Faßbender wrote:
Hi
Yesterday i installed freebsd10 on my Lenovo G550 Laptop. My USB speakers
won't work! They are not detected. How can freebsd recognize them?
Thx for your answer
Hi,
Can you get some more information about your USB speakers:
usbconfig -d X.Y du
Hi
Yesterday i installed freebsd10 on my Lenovo G550 Laptop. My USB speakers
won't work! They are not detected. How can freebsd recognize them?
Thx for your answer
___
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/fr
Hi,
Reference:
> From: Ferry Syafei Sapei <[EMAIL PROTECTED]>
> Date: Sun, 2 Nov 2008 12:32:12 -0800 (PST)
> Message-id: <[EMAIL PROTECTED]>
Ferry Syafei Sapei wrote:
> I've set microphone volume to 100, but there was still no sound at all.
>
> What else should I do?
mixer 1
I've set microphone volume to 100, but there was still no sound at all.
What else should I do?
Ferry
___
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[EMAIL PROT
On Sunday 02 November 2008, Ferry Syafei Sapei wrote:
> The mixer settings could be seen below:
>
> # mixer
> Mixer vol is currently set to 100:100
> Mixer pcm is currently set to 100:100
> Mixer mic is currently set to 0:0
>
>
> Best regards,
> Ferry
>
Try increasing the micropho
The mixer settings could be seen below:
# mixer
Mixer vol is currently set to 100:100
Mixer pcm is currently set to 100:100
Mixer mic is currently set to 0:0
Best regards,
Ferry
___
freebsd-usb@freebsd.org mailing list
http:/
; line snd_uaudio_load="YES" to /boot/loader.conf to output the sound to an
> external USB speaker.
>
> After reboot, I could see clearly in the middle of the initialization phase
> that PC-BSD recognized my USB speaker. However at the end of the
> initialization phas
sound to an external
USB speaker.
After reboot, I could see clearly in the middle of the initialization phase
that PC-BSD recognized my USB speaker. However at the end of the initialization
phase, PC-BSD tried to set the value of dev.pcm.0.play.vchans and I saw an
error message as follow