青木@国分寺市在住です。 From: Hiroo Ono (小野寛生) <hiroo.ono+free...@gmail.com> Subject: Re: [FreeBSD-users-jp 95223] Re: powerd with high frequency when idling Date: Wed, 2 Jul 2014 23:20:31 +0900
> 問題が起きているバージョンが異なりますが、これと同じ話かもしれません。 > "powerd stopped working after update from 8.4 to 9.2" > http://lists.freebsd.org/pipermail/freebsd-stable/2014-June/079032.html > verbose boot したら、dmesg でこのメールと同じような症状が見えないでしょうか? acpi_throttle0: <ACPI CPU Throttling> on cpu0 -acpi_throttle0: P_CNT from P_BLK 0x4010 +acpi_throttle0: failed to attach P_CNT +device_attach: acpi_throttle0 attach returned 6 については、変化ないようです。その他についてはsmbusはもともと pci0: <serial bus, SMBus> at device 20.0 (no driver attached) で、現在と変わりなく、smbおよびviapromもないので、今回は違うみたいです。 > 8-stable には入らないようなので、同じ問題ならですが、 > http://svnweb.freebsd.org/base?view=revision&revision=263022 > と > http://svnweb.freebsd.org/base?view=revision&revision=267883 > をもってきて、src/sys/dev/acpica/acpi.c にマージすればよさそうです。 ちょっと差分が大きそうなのでmergeは手間がかかりそうですがやってみたいと 思います。 情報ありがとうございます。 運用中のマシンということで再起動できるタイミングがあんまりないので試す まではしばらくかかりそうです。 とはいえ、現verboseで起動することは出来ました。 #このメールに添付します。 そうしたら起動後 acpi_tz0: temperature 61.0C: increasing clock speed from 800 MHz to 960 MHz acpi_tz0: temperature 66.0C: decreasing clock speed from 960 MHz to 800 MHz といったメッセージが延々と出ました。 sysctl.confに書いた hw.acpi.thermal.user_override=1 hw.acpi.thermal.tz0._PSV=65C hw.acpi.thermal.tz0._TC1=0 hw.acpi.thermal.tz0._TC2=1 hw.acpi.thermal.tz0._TSP=60 hw.acpi.thermal.tz0.passive_cooling=1 は効いているようです。 messagesに残ってないのでちょっとあやふやですが、このとき「cpufreqを使っ て」といったようなメッセージもちょっと出ていたような気もします。 青木和麻呂@国分寺市在住
Table 'FACP' at 0x66a6eb10 Table 'APIC' at 0x66a6ec08 APIC: Found table at 0x66a6ec08 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.4-RELEASE-p13 #0 r267886: Thu Jun 26 09:49:26 JST 2014 m...@isdb.if0.org:/usr/obj/usr/src/sys/GENERIC amd64 gcc version 4.2.1 20070831 patched [FreeBSD] Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8107b000. Preloaded elf obj module "/boot/modules/ptx.ko" at 0xffffffff8107b350. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1600097706 Hz CPU: AMD E-350 Processor (1600.10-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x500f10 Family = 14 Model = 1 Stepping = 0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT> TSC: P-state invariant L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 40 entries, fully associative L1 4KB instruction TLB: 0 entries, 0-way associative L1 data cache: 32 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative L1 instruction cache: 32 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 2147483648 (2048 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages) 0x00000000010a8000 - 0x000000006399efff, 1653567488 bytes (403703 pages) 0x0000000066a99000 - 0x0000000066a99fff, 4096 bytes (1 pages) 0x0000000066b1a000 - 0x0000000066d80fff, 2519040 bytes (615 pages) avail memory = 1643024384 (1566 MB) ACPI APIC Table: <ALASKA A M I> INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 x86bios: IVT 0x000000-0x0004ff at 0xffffff0000000000 x86bios: SSEG 0x010000-0x01ffff at 0xffffff800000c000 x86bios: EBDA 0x09e000-0x09ffff at 0xffffff000009e000 x86bios: ROM 0x0a0000-0x0effff at 0xffffff00000a0000 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf0450 00024 (v02 ALASKA) ACPI: XSDT 0x66a67068 00054 (v01 ALASKA A M I 01072009 AMI 00010013) ACPI: FACP 0x66a6eb10 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20101013/tbfadt-655) ACPI: DSDT 0x66a67150 079BA (v02 ALASKA A M I 00000000 INTL 20051117) ACPI: FACS 0x66ab1f80 00040 ACPI: APIC 0x66a6ec08 00062 (v03 ALASKA A M I 01072009 AMI 00010013) ACPI: MCFG 0x66a6ec70 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) ACPI: HPET 0x66a6ecb0 00038 (v01 ALASKA A M I 01072009 AMI 00000004) ACPI: SSDT 0x66a6ece8 003DE (v01 AMD POWERNOW 00000001 AMD 00000001) ACPI: SSDT 0x66a6f0c8 012FA (v02 AMD ALIB 00000001 MSFT 04000000) MADT: Found IO APIC ID 0, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 0 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: high ioapic0 <Version 2.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> io: <I/O> null: <null device, zero device> hpt27xx: RocketRAID 27xx controller driver v1.0 hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 acpi0: <ALASKA A M I> on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] ACPI: Executed 3 blocks of module-level executable AML code acpi0: Power Button (fixed) unknown: I/O range not supported ACPI timer: 1/2 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: Processor \_PR_.P001 (ACPI ID 1) -> APIC ID 0 cpu0: <ACPI CPU> on acpi0 cpu1: Processor \_PR_.P002 (ACPI ID 2) -> APIC ID 1 cpu1: <ACPI CPU> on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 14 15 Validation 0 255 N 0 4 7 10 11 14 15 After Disable 0 255 N 0 4 7 10 11 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 14 15 Validation 0 255 N 0 4 7 10 11 14 15 After Disable 0 255 N 0 4 7 10 11 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 14 15 Validation 0 255 N 0 4 7 10 11 14 15 After Disable 0 255 N 0 4 7 10 11 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 14 15 Validation 0 255 N 0 4 7 10 11 14 15 After Disable 0 255 N 0 4 7 10 11 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 14 15 Validation 0 255 N 0 4 7 10 11 14 15 After Disable 0 255 N 0 4 7 10 11 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 14 15 Validation 0 255 N 0 4 7 10 11 14 15 After Disable 0 255 N 0 4 7 10 11 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 14 15 Validation 0 255 N 0 4 7 10 11 14 15 After Disable 0 255 N 0 4 7 10 11 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 14 15 Validation 0 255 N 0 4 7 10 11 14 15 After Disable 0 255 N 0 4 7 10 11 14 15 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x4353 rev: 0x10 num: 2 hz: 14318180 opts: legacy_route Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1022, dev=0x1510, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x9802, revid=0x00 domain=0, bus=0, slot=1, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Prefetchable Memory, range 32, base 0xc0000000, size 28, enabled map[14]: type I/O Port, range 32, base 0xf000, size 8, enabled map[18]: type Memory, range 32, base 0xfeb00000, size 18, enabled pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0x1314, revid=0x00 domain=0, bus=0, slot=1, func=1 class=04-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfeb44000, size 14, enabled pcib0: matched entry for 0.1.INTB pcib0: slot 1 INTB hardwired to IRQ 19 found-> vendor=0x1022, dev=0x1512, revid=0x00 domain=0, bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit pcib0: matched entry for 0.4.INTA pcib0: slot 4 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x4390, revid=0x40 domain=0, bus=0, slot=17, func=0 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type I/O Port, range 32, base 0xf140, size 3, enabled map[14]: type I/O Port, range 32, base 0xf130, size 2, enabled map[18]: type I/O Port, range 32, base 0xf120, size 3, enabled map[1c]: type I/O Port, range 32, base 0xf110, size 2, enabled map[20]: type I/O Port, range 32, base 0xf100, size 4, enabled map[24]: type Memory, range 32, base 0xfeb4f000, size 10, enabled pcib0: matched entry for 0.17.INTA pcib0: slot 17 INTA hardwired to IRQ 19 found-> vendor=0x1002, dev=0x4397, revid=0x00 domain=0, bus=0, slot=18, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xfeb4e000, size 12, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 18 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeb4e000 ohci early: SMM active, request owner change found-> vendor=0x1002, dev=0x4396, revid=0x00 domain=0, bus=0, slot=18, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfeb4d000, size 8, enabled pcib0: matched entry for 0.18.INTB pcib0: slot 18 INTB hardwired to IRQ 17 unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfeb4d000 found-> vendor=0x1002, dev=0x4397, revid=0x00 domain=0, bus=0, slot=19, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xfeb4c000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeb4c000 ohci early: SMM active, request owner change found-> vendor=0x1002, dev=0x4396, revid=0x00 domain=0, bus=0, slot=19, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfeb4b000, size 8, enabled pcib0: matched entry for 0.19.INTB pcib0: slot 19 INTB hardwired to IRQ 17 unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfeb4b000 found-> vendor=0x1002, dev=0x4385, revid=0x42 domain=0, bus=0, slot=20, func=0 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0403, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4383, revid=0x40 domain=0, bus=0, slot=20, func=2 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xfeb40000, size 14, enabled pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x439d, revid=0x40 domain=0, bus=0, slot=20, func=3 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4384, revid=0x40 domain=0, bus=0, slot=20, func=4 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0027, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4399, revid=0x00 domain=0, bus=0, slot=20, func=5 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[10]: type Memory, range 32, base 0xfeb4a000, size 12, enabled pcib0: matched entry for 0.20.INTC pcib0: slot 20 INTC hardwired to IRQ 18 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeb4a000 ohci early: SMM active, request owner change found-> vendor=0x1002, dev=0x43a0, revid=0x00 domain=0, bus=0, slot=21, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x1002, dev=0x4397, revid=0x00 domain=0, bus=0, slot=22, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xfeb49000, size 12, enabled pcib0: matched entry for 0.22.INTA pcib0: slot 22 INTA hardwired to IRQ 18 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeb49000 ohci early: SMM active, request owner change found-> vendor=0x1002, dev=0x4396, revid=0x00 domain=0, bus=0, slot=22, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfeb48000, size 8, enabled pcib0: matched entry for 0.22.INTB pcib0: slot 22 INTB hardwired to IRQ 17 unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfeb48000 found-> vendor=0x1022, dev=0x1700, revid=0x43 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1701, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1702, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1703, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1704, revid=0x00 domain=0, bus=0, slot=24, func=4 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1718, revid=0x00 domain=0, bus=0, slot=24, func=5 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1716, revid=0x00 domain=0, bus=0, slot=24, func=6 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1719, revid=0x00 domain=0, bus=0, slot=24, func=7 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xfeb00000-0xfeb3ffff irq 18 at device 1.0 on pci0 pci0: <multimedia, HDA> at device 1.1 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: no prefetched decode pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 atapci0: <ATI IXP700/800 SATA300 controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb4f000-0xfeb4f3ff irq 19 at deatapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf100 atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfeb4f000 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 49 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM supported atapci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd 4ports ata2: <ATA channel> at channel 0 on atapci0 ata2: AHCI reset... ata2: hard reset ... ata2: SATA connect time=0ms status=00000123 ata2: ready wait time=0ms ata2: software reset port 15... ata2: ready wait time=0ms ata2: SIGNATURE: 00000101 ata2: AHCI reset done: devices=00000001 ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel> at channel 1 on atapci0 ata3: AHCI reset... ata3: hard reset ... ata3: SATA connect timeout status=00000000 ata3: AHCI reset done: phy reset found no device ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel> at channel 2 on atapci0 ata4: AHCI reset... ata4: hard reset ... ata4: SATA connect timeout status=00000000 ata4: AHCI reset done: phy reset found no device ata4: [MPSAFE] ata4: [ITHREAD] ata5: <ATA channel> at channel 3 on atapci0 ata5: AHCI reset... ata5: hard reset ... ata5: SATA connect timeout status=00000000 ata5: AHCI reset done: phy reset found no device ata5: [MPSAFE] ata5: [ITHREAD] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb4e000-0xfeb4efff irq 18 at device 18.0 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 50 ohci0: [MPSAFE] ohci0: [ITHREAD] usbus0 on ohci0 usbus0: bpf attached ohci0: usbpf: Attached ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb4d000-0xfeb4d0ff irq 17 at device 18.2 on pci0 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 51 ehci0: [MPSAFE] ehci0: [ITHREAD] ehci0: Dropped interrupts workaround enabled usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: bpf attached ehci0: usbpf: Attached ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb4c000-0xfeb4cfff irq 18 at device 19.0 on pci0 ohci1: [MPSAFE] ohci1: [ITHREAD] usbus2 on ohci1 usbus2: bpf attached ohci1: usbpf: Attached ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb4b000-0xfeb4b0ff irq 17 at device 19.2 on pci0 ehci1: [MPSAFE] ehci1: [ITHREAD] ehci1: Dropped interrupts workaround enabled usbus3: EHCI version 1.0 usbus3 on ehci1 usbus3: bpf attached ehci1: usbpf: Attached pci0: <serial bus, SMBus> at device 20.0 (no driver attached) pci0: <multimedia, HDA> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: memory decode 0xfea00000-0xfeafffff pcib2: no prefetched decode pcib2: Subtractively decoded bridge. pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x10ee, dev=0x222a, revid=0x01 domain=0, bus=2, slot=5, func=0 class=04-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type Memory, range 32, base 0xfea00000, size 12, enabled pcib2: requested memory range 0xfea00000-0xfea00fff: good ptx0: <EARTHSOFT PT2> mem 0xfea00000-0xfea00fff at device 5.0 on pci2 ptx0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfea00000 ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb4a000-0xfeb4afff irq 18 at device 20.5 on pci0 ohci2: [MPSAFE] ohci2: [ITHREAD] usbus4 on ohci2 usbus4: bpf attached ohci2: usbpf: Attached pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xe000-0xefff pcib3: prefetched decode 0xd0000000-0xd00fffff pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x10ec, dev=0x8168, revid=0x06 domain=0, bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 4 messages in map 0x20 map[10]: type I/O Port, range 32, base 0xe000, size 8, enabled pcib3: requested I/O range 0xe000-0xe0ff: in range map[18]: type Prefetchable Memory, range 64, base 0xd0004000, size 12, enabled pcib3: requested memory range 0xd0004000-0xd0004fff: good map[20]: type Prefetchable Memory, range 64, base 0xd0000000, size 14, enabled pcib3: requested memory range 0xd0000000-0xd0003fff: good pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 16 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 16 at device 0.0 on pci3 re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xd0004000 re0: MSI count : 1 re0: MSI-X count : 4 re0: Reserved 0x4000 bytes for rid 0x20 type 3 at 0xd0000000 re0: attempting to allocate 1 MSI-X vectors (4 supported) msi: routing MSI-X IRQ 256 to local APIC 0 vector 52 re0: using IRQ 256 for MSI-X re0: Using 1 MSI-X message re0: Chip rev. 0x2c000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDre0: bpf attached re0: Ethernet address: 00:30:18:a5:6f:a3 re0: [MPSAFE] re0: [ITHREAD] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb49000-0xfeb49fff irq 18 at device 22.0 on pci0 ohci3: [MPSAFE] ohci3: [ITHREAD] usbus5 on ohci3 usbus5: bpf attached ohci3: usbpf: Attached ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb48000-0xfeb480ff irq 17 at device 22.2 on pci0 ehci2: [MPSAFE] ehci2: [ITHREAD] ehci2: Dropped interrupts workaround enabled usbus6: EHCI version 1.0 usbus6 on ehci2 usbus6: bpf attached ehci2: usbpf: Attached acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x83ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 53 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0065 psm0: failed to reset the aux device. uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 54 uart0: [FILTER] uart0: fast interrupt atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) acpi0: wakeup code va 0xffffff807643c000 pa 0x4000 ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 1: ioport 0x1c00 alloc failed ahc_isa_probe 2: ioport 0x2c00 alloc failed ahc_isa_probe 3: ioport 0x3c00 alloc failed ahc_isa_probe 4: ioport 0x4c00 alloc failed ahc_isa_probe 5: ioport 0x5c00 alloc failed ahc_isa_probe 6: ioport 0x6c00 alloc failed ahc_isa_probe 7: ioport 0x7c00 alloc failed ahc_isa_probe 8: ioport 0x8c00 alloc failed ahc_isa_probe 9: ioport 0x9c00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0 failed to probe at irq 7 on isa0 uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 wbwd0 failed to probe on isa0 isa_probe_children: probing PnP devices acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x810 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 Device configuration finished. procfs registered lapic: Divisor 2, Frequency 100006128 Hz Timecounter "TSC" frequency 1600097706 Hz quality -100 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hpt27xx: no controller detected. hptrr: no controller detected. ata2: Identifying devices: 00000001 ata2: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ad4: setting UDMA100 ad4: 122104MB <M4 CT128M4SSD2 0309> at ata2-master UDMA100 SATA 3Gb/s ad4: 250069680 sectors [248085C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4ad4: Silicon Image check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: Identifying devices: 00000000 ata3: New devices: 00000000 ata4: Identifying devices: 00000000 ata4: New devices: 00000000 ata5: Identifying devices: 00000000 ata5: New devices: 00000000 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 48 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 49 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 50 ugen1.1: <ATI> at usbus1ugen0.1: <ATI> at usbus0 uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen2.1: <ATI> at usbus2 uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen4.1: <ATI> at usbus4ugen3.1: <ATI> at usbus3 uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen5.1: <ATI> at usbus5ugen6.1: <ATI> at usbus6 uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 Root mount waiting for: usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0 uhub3: 2 ports with 2 removable, self powered uhub5: 4 ports with 4 removable, self powered uhub1: 5 ports with 5 removable, self powered uhub2: 5 ports with 5 removable, self powered Root mount waiting for: usbus6 usbus3 usbus1 uhub6: 4 ports with 4 removable, self powered uhub0: 5 ports with 5 removable, self powered uhub4: 5 ports with 5 removable, self powered Trying to mount root from ufs:/dev/ad4s1a
_______________________________________________ freebsd-users-jp@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-users-jp To unsubscribe, send any mail to "freebsd-users-jp-unsubscr...@freebsd.org"