たかはしです。 某所から誘導されてまいりましたf(^^; FreeBSD 6.3-Release(6.3-RELEASE-i386-bootonly.iso)をインストールしようとする と、panicで起動しません。 WindowsServerや、DebianLinuxなどは起動します。 FreeBSD 7.0-Release、FreeNASの起動CDでは起動しませんでした。 memtest86はエラーなく、48時間パスしました。 PnP情報までは取得できているみたいなのですが、その次の処理でpanicになるようで す。 RAIDカードは付けていても外しても同じ症状です。 BIOSなのでしょうか・・・?
マシン:NEC Express5800/Firewallserver(N8100-735) Pentium3 1GHz VIA 82C691チッ プセット メモリ:768M RAIDカード:Adaptec ATA-1200A(HPT370 ATA RAIDカード RAID1でセットアップ) HDD#1:WDC WD2500JB HDD#2:WDC WD2500BB 以下、boot -v のログです。 SMAP type=01 base=0000000000000000 len=000000000009e000 SMAP type=02 base=000000000009e000 len=0000000000002000 SMAP type=02 base=00000000000e0800 len=000000000001f800 SMAP type=01 base=0000000000100000 len=000000002ff00000 SMAP type=02 base=00000000fffe0000 len=0000000000020000 Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.3-RELEASE #0: Wed Jan 16 04:18:52 UTC 2008 [メールアドレス保護]:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0fda000. Preloaded mfs_root "/boot/mfsroot" at 0xc0fda144. Calibrating clock(s) ... i8254 clock: 1193152 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 997460779 Hz CPU: Intel Pentium III (997.46-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 805306368 (768 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x000000002f239fff, 773935104 bytes (188949 pages) avail memory = 774598656 (738 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6660 bios32: Entry = 0xfd700 (c00fd700) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd700+0x133 pnpbios: Found PnP BIOS data at 0xc00f66c0 pnpbios: Entry = f0000:9885 Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Jan 16 2008 04:16:21) hptrr: HPT RocketRAID controller driver v1.1 (Jan 16 2008 04:16:19) npx0: INT 16 interface cpu0 on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106) pcibios: BIOS version 2.10 pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard $PIR: Entry 0.0.INTA has different mask for link 0x55, merging $PIR: Entry 0.0.INTB has different mask for link 0x56, merging $PIR: Entry 0.0.INTC has different mask for link 0x56, merging $PIR: Entry 0.0.INTD has different mask for link 0x57, merging $PIR: Entry 0.7.INTA has different mask for link 0x55, merging $PIR: Entry 0.7.INTB has different mask for link 0x56, merging $PIR: Entry 0.7.INTC has different mask for link 0x56, merging $PIR: Entry 0.7.INTD has different mask for link 0x57, merging $PIR: Entry 0.1.INTA has different mask for link 0x56, merging $PIR: Links after initial probe: Link IRQ Rtd Ref IRQs 0x55 255 N 3 3 4 5 6 7 10 11 12 14 15 0x56 255 N 9 3 4 5 6 7 10 11 12 14 15 0x57 255 N 3 3 4 5 6 7 10 11 12 14 15 $PIR: Found matching pin for 0.11.INTA at func 0: 11 $PIR: Found matching pin for 0.9.INTA at func 0: 7 $PIR: Found matching pin for 0.10.INTA at func 0: 7 $PIR: Found matching pin for 0.7.INTD at func 2: 5 $PIR: Links after initial IRQ discovery: Link IRQ Rtd Ref IRQs 0x55 11 Y 3 3 4 5 6 7 10 11 12 14 15 0x56 7 Y 9 3 4 5 6 7 10 11 12 14 15 0x57 5 Y 3 3 4 5 6 7 10 11 12 14 15 $PIR: IRQs used by BIOS: 5 7 11 $PIR: Interrupt Weights: [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ] [ 0 0 0 0 0 3 0 9 0 0 0 3 0 0 0 0 ] pci0: <PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x1106, dev=0x0691, revid=0xc4 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 3, range 32, base f8000000, size 26, enabled found-> vendor=0x1106, dev=0x8598, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D3 current D0 found-> vendor=0x1106, dev=0x0686, revid=0x40 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=7, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 000014a0, size 4, enabled found-> vendor=0x1106, dev=0x3038, revid=0x16 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00001480, size 5, enabled $PIR: 0:7 INTD routed to irq 5 found-> vendor=0x1106, dev=0x3057, revid=0x40 bus=0, slot=7, func=4 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=9, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=7 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f4200000, size 12, enabled map[14]: type 4, range 32, base 00001400, size 6, enabled map[18]: type 1, range 32, base f4000000, size 20, enabled $PIR: 0:9 INTA routed to irq 7 found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=10, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=7 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f4201000, size 12, enabled map[14]: type 4, range 32, base 00001440, size 6, enabled map[18]: type 1, range 32, base f4100000, size 20, enabled $PIR: 0:10 INTA routed to irq 7 found-> vendor=0x1103, dev=0x0004, revid=0x03 bus=0, slot=11, func=0 class=01-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 000014c0, size 3, enabled map[14]: type 4, range 32, base 000014b4, size 2, enabled map[18]: type 4, range 32, base 000014b8, size 3, enabled map[1c]: type 4, range 32, base 000014b0, size 2, enabled map[20]: type 4, range 32, base 00001000, size 8, enabled $PIR: 0:11 INTA routed to irq 11 agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000 agp0: allocating GATT for aperture of size 256M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x9000-0x9fff pcib1: memory decode 0xf4300000-0xf5ffffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x1002, dev=0x474d, revid=0x27 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f5000000, size 24, enabled pcib1: requested memory range 0xf5000000-0xf5ffffff: good map[14]: type 4, range 32, base 00009000, size 8, enabled pcib1: requested I/O range 0x9000-0x90ff: in range map[18]: type 1, range 32, base f4300000, size 12, enabled pcib1: requested memory range 0xf4300000-0xf4300fff: good pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686B UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x14a0-0x14af at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x14a0 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=00 ostat0=ff ostat1=ff ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: [MPSAFE] uhci0: <VIA 83C572 USB controller> port 0x1480-0x149f irq 5 at device 7.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1480 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge> at device 7.4 (no driver attached) fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1400-0x143f mem 0xf4200000-0xf4200fff,0xf4000000-0xf40fffff irq 7 at device 9.0 on pci0 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf4200000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 1033 8084 0008 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:00:4c:4f:ac:72 fxp0: [MPSAFE] fxp1: <Intel 82559 Pro/100 Ethernet> port 0x1440-0x147f mem 0xf4201000-0xf4201fff,0xf4100000-0xf41fffff irq 7 at device 10.0 on pci0 fxp1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf4201000 fxp1: using memory space register mapping fxp1: PCI IDs: 8086 1229 1033 8084 0008 fxp1: Dynamic Standby mode is disabled miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: bpf attached fxp1: Ethernet address: 00:00:4c:4f:ac:73 fxp1: [MPSAFE] atapci1: <HighPoint HPT370 UDMA100 controller> port 0x14c0-0x14c7,0x14b4-0x14b7,0x14b8-0x14bf,0x14b0-0x14b3,0x1000-0x10ff irq 11 at device 11.0 on pci0 atapci1: Reserved 0x100 bytes for rid 0x20 type 4 at 0x1000 atapci1: [MPSAFE] ata2: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x14c0 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x14b4 ata2: reset tp1 mask=03 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: [MPSAFE] ata3: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x14b8 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x14b0 ata3: reset tp1 mask=03 ostat0=50 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata3: [MPSAFE] unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete kernel trap 9 with interrupts disabled Fatal trap 9: general protection fault while in kernel mode instruction pointer = 0x70:0x4059 stack pointer = 0x28:0xed2 frame pointer = 0x28:0xf16 code segment = base 0xc00f0000, limit 0xffff, type 0x1b = DPL 0, pres 1, def32 0, gran 0 processor eflags = resume, IOPL = 0 current process = 0 (swapper) trap number = 9 panic: general protection fault Uptime: 1s Automatic reboot in 15 seconds - press a key on the console to abort -- たかはし [メールアドレス保護]