I use wpa_gui, and sometimes it fails to connect with the "Last message"
field alternating between "Associating ..." and "TKIP countermeasures
started".
What does the latter message mean, and why does it prevent connectivity?
i
that affects
this? Or should this be considered normal?
/etc/rc.config has:
wlans_run0="wlan0"
ifconfig_wlan0="WPA SYNCDHCP"
wpa_supplicant_enable="YES"
wpa_supplicant_program="/usr/local/sbin/wpa_supplicant"
r
On 05/26/18 07:14, Kevin Lo wrote:
Yours is RTL8821AE mPCIe chip which is not supported.
Do you know is it generally hard to port the diver for the chipset
available for USB interface to mPCIe interface, like in this case?
Yuri
___
freebsd
802.11ac PCIe Wireless Network Adapter'
class = network
if_rtwn_pci.ko/if_urtw.ko/rtwn.ko are loaded (at run time).
Yuri
___
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe
This driver supports RTL8812AU/RTL8821A: https://github.com/s3erios/urtwm
Should it be imported?
Yuri
___
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "fr
worked fine, I assume other people were equally
distributed between them. S:N ratios were fluctuating so that the second
was stronger at times.
Is it possible that VHTCAP VHTOPMODE have something to do with the problem?
Yuri
___
freebsd-wireless
I created the bug report for this
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=215265 since there is
no known solution.
Yuri
___
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe
,
loss of IP connectivity. Nothing new is printed at and after the moment
of failure, see below.
Yuri
wlan0: start running, 0 vaps running
wlan0: ieee80211_start_locked: up parent run0
run0: firmware RT3071 ver. 0.33 loaded
wlan0: start running, 1 vaps running
wlan0: ieee80211_new_state_locked
vacy OFF txpower 17
bmiss 7
mcastrate 6 mgmtrate 6 scanvalid 60 wme roaming MANUAL
groups: wlan
This ssid had about 8 bssids, and a lot of people were using it at the
same time, if congestion matters.
FreeBSD 11 amd64
Yuri
___
freebsd-
On 11/30/2016 17:32, Adrian Chadd wrote:
ping?:)
-a
Yes, I will do this once I get into such place again.
Yuri
___
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any
, conference halls, hotels which attempt to
"cover" the space with APs with the same name. Sometimes there were
10-20 APs in sight.
Yuri
___
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To u
On 11/21/2016 17:53, Fehmi Noyan ISI wrote:
Have you tried adding bssid into wpa_supplicant.conf?
https://www.freebsd.org/cgi/man.cgi?wpa_supplicant.conf%285%29
With update_config=1 wpa_supplicant does all of this itself based on
wpa_gui requests.
Yuri
.
Anybody has any insight as of what the problem might be?
Yuri
___
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
I upgraded the system from 10.3 to 11 and the network interface isn't
created any more for this TP-Link / N600 card:
> run0 on uhub3
> run0: <1.0> on usbus3
> run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address
60:xx:xx:xx:xx:xx
What change
On 10/14/2016 16:26, Andriy Voskoboinyk wrote:
https://github.com/s3erios/rtwn ? (I'm going to commit it soon).
But these are just USB IDs. This doesn't necessarily mean they actually
work well?
Yuri
___
freebsd-wireless@freebsd.org mailing
I am trying to compile the list of USB Wi-Fi cards that are well
supported to add such section to the handbook.
Anybody knows other cards that work well besides RT5370 USB dongles and
TP-LINK TL-WDN3200?
Thank you,
Yuri
___
freebsd-wireless
On 10/08/2016 23:25, Yuri wrote:
I have Belkin F5D7050 USB WiFI NIC, but zyd driver is faulty and the
card freezes up with the timeout message:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=138292.
Can anybody recommend the USB NIC that works well on FreeBSD, is
inexpensive and easily
On 10/09/2016 11:17, Adrian Chadd wrote:
I'll go see if we can add more device debugging to that driver. I
remember fixing TX hangs in other USB drivers.
Yes, please do. Please let me know if you need me to test it.
Thanks,
Yuri
___
freebsd
r. I found that this long-standing bug in zyd(4)
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=138292 is probably
causing this problem as I am also getting the device timeout messages.
Yuri
___
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.o
I have Belkin F5D7050 USB WiFI NIC, but zyd driver is faulty and the
card freezes up with the timeout message:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=138292.
Can anybody recommend the USB NIC that works well on FreeBSD, is
inexpensive and easily available?
Yuri
, for example.
Anybody know what might be the problem?
Yuri
___
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=211213
Thanks,
Yuri
___
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
for
bcmwl564_sys.ko with ndisgen, like is normally generated for all other
kernel modules? Or otherwise where do I go from here?
Thanks,
Yuri
(kgdb) bt
#0 doadump (textdump=) at pcpu.h:219
#1 0x80953092 in kern_reboot (howto=260) at
/usr/src/sys/kern/kern_shutdown.c:486
#2
in ndis_bcmwl564_sys_drv_data_start () from
/boot/modules/bcmwl564_sys.ko
#9 0x05a8 in ?? ()
#10 0xf80017617194 in ?? ()
Otherwise there is no useful info in vmcore.0. I will rerun with the
debug kernel and will get more information.
Yuri
___
freebsd
On 07/18/2016 22:13, Felix Friedlander wrote:
Does this mean that NDIS drivers are working again? I thought they were broken…
It works for me on 10.3. But I also see crashes because of ndis. I am
going to post in a separate thread.
Yuri
On 07/17/2016 16:02, Yuri wrote:
This post https://forums.freebsd.org/threads/33728/ says that BCM4313
should work.
But ndis driver when loaded doesn't create the ndis0 interface.
I think only bcmwl564_sys.ko should suffice, though I also tried with
3 .ko files too like this guy suggested
On 07/17/2016 19:56, Adrian Chadd wrote:
What's in dmesg?
Nothing is written to dmesg when the kernel module is loaded. I wonder
if this is maybe a wrong bcmwl5.inf/bcmwl564.sys. I don't think there is
a standard location for these.
Yuri
0x819d7000 4a80 coretemp.ko
31 0xfecba000 204000 bcm43xx64.cat.ko
41 0xfeebe000 218000 bcmwlcoi64.dll.ko
51 0x81c11000 1c7c4f bcmwl564_sys.ko
62 0x81dd9000 1feffndis.ko
71 0x81df9000 e81d if_ndis.ko
Yuri
10.3 amd64
Yuri
___
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
On 01/03/2014 10:08, Adrian Chadd wrote:
Have you loaded all the wlan modules?
Yes, every single module /boot/kernel/wlan*.ko is loaded.
Yuri
___
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
), which is caused by ieee80211_find_vap_node
returning null. And ieee80211_find_vap_node looks for some MAC address.
I think the problem is that I changed the MAC address of the ath0
interface, and the old one got cached somewhere.
Yuri
___
freebsd
On 01/03/2014 12:10, Adrian Chadd wrote:
Yeah, you should only change the MAC when you bring up the AP, not
during its operation.
I was changing MAC before I was bringing it up:
ifconfig ath0 link $NEW_MAC
ifconfig wlan0 create wlandev ath0 wlanmode hostap
...
Yuri
where does hostapd get the original MAC from?
Yuri
___
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
33 matches
Mail list logo
