Ok, it's working fine with freebsd-9
Did some more tests with FreeBSD 11.0-CURRENT.
I think the ANI problem is only there when the nodes are in ADHOC mode (default
mode for our mesh). The same hardware setup works fine if the nodes are in
AP/Client mode.
Johann
On 08/01/2014 19:56, Adrian
Hi
Is it possible to disable ANI ?
How should we go about to narrow down the problem ?
FreeBSD 11.0-CURRENT (Looks like crcerr is not updating)
mesh-6c9a:~ # athstats -i ath1 anistats -o ani 1
input output altrate shortlong xretry crcerr
Well, step #1 would be to run the freebsd-9 ath(4) driver in the later
freebsd version. If you're able to shoehorn that in, let's see if
that's the case.
-a
On 1 August 2014 02:20, Johann Hugo jh...@meraka.csir.co.za wrote:
Hi
Is it possible to disable ANI ?
How should we go about to
Hi
After an upgrade from FreeBSD 9.0 to 11.0 I'm losing comms to some of the wifi
clients that worked when I was using FreeBSD 9.0 (long distance links in mesh)
On CURRENT the devices are still showing with list sta, but the idle counter
keeps growing + no comms to them.
FreeBSD 9.0-STABLE
I think the idle counter there is the receive idle counter. Ie, it's
not hearing frames from them.
See if you can figure out what frames it isn't hearing.
The RSSI's look fine. So there's likely something else odd going on
-a
On 31 July 2014 13:00, Johann Hugo jh...@meraka.csir.co.za wrote:
On Thursday 31 July 2014 13:43:34 Adrian Chadd wrote:
I think the idle counter there is the receive idle counter. Ie, it's
not hearing frames from them.
See if you can figure out what frames it isn't hearing.
tcpdump for the last couple of minutes.
mesh-6c9a:~ # tcpdump -i wlan1 -n -e -y
Hi,
Yeah, run athstats 1 on both to see what kind of difference(s) there
are in transmit/receive statistics.
I wonder if it's changes in the ANI code.
-a
On 31 July 2014 14:14, Johann Hugo jh...@meraka.csir.co.za wrote:
On Thursday 31 July 2014 13:43:34 Adrian Chadd wrote:
I think the
On Thursday 31 July 2014 14:29:55 Adrian Chadd wrote:
Hi,
Yeah, run athstats 1 on both to see what kind of difference(s) there
are in transmit/receive statistics.
I wonder if it's changes in the ANI code.
Just booted with FreeBSD 9.0 again
mesh-6c9a:~ # ifconfig wlan1 list sta
ADDR
On Thursday 31 July 2014 14:29:55 Adrian Chadd wrote:
Hi,
Yeah, run athstats 1 on both to see what kind of difference(s) there
are in transmit/receive statistics.
I wonder if it's changes in the ANI code.
Forgot to mention that I only see the problem on cards with an Atheros 9220
chipset
On 31 July 2014 14:56, Johann Hugo jh...@meraka.csir.co.za wrote:
On Thursday 31 July 2014 14:29:55 Adrian Chadd wrote:
Hi,
Yeah, run athstats 1 on both to see what kind of difference(s) there
are in transmit/receive statistics.
I wonder if it's changes in the ANI code.
Forgot to
10 matches
Mail list logo