Re: [FUG-BR] Instalação do vscan pelo ports
On 12/3/06, Suprema Informática Ltda <[EMAIL PROTECTED]> wrote: > Bem, feita a instalação, (concluida com exito) > > o vscan vai funcionar por apenas 30 dias, ou tem como buscar uma licença > permanente, ou de maior duração Tem que comprar uma licença de uso, ou partir para uma solução free, como o clamav. -- Renato Botelho - Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
Re: [FUG-BR] Instalação do vscan pelo ports
Bem, feita a instalação, (concluida com exito) o vscan vai funcionar por apenas 30 dias, ou tem como buscar uma licença permanente, ou de maior duração Flavio Alexsandro Silva escreveu: > Naum sei lhe dizer... > > sempre que tenho algum problema com algum port, de praxe jah abro o > Makefile e vejo os WITH e WITHOUT... > exemplo: squid26stable2... tava com algo bem parecido e vi que tinha uma > variavel que aceitava parametros para serem passados para o configure do > squid... ae foi soh make -D"parametros" config all package clean > > blz?? > > Abraços, > > Ari Arantes wrote: > >> Flávio, >> >> Existe documentação para isso? Ou somente vi Makefile??? >> >> Deveria existir como costumar ter nos ./configure --help. >> >> []s, >> >> Ari >> >> >> Em 29/11/06, Flavio Alexsandro Silva<[EMAIL PROTECTED]> escreveu: >> >> >>> Ari, >>> >>> Vc tambem pode fazer o seguinte: >>> #cd /usr/ports/security/vscan >>> #make -DWITHOUT_COMPAT3 all >>> >>> Pois no Makefile existe uma parte dele preparada pra essa condicao, >>> nas versoes do FreeBSD 5.1 em diante... >>> >>> .if defined(WITHOUT_COMPAT3) >>> .if ${OSVERSION} < 51 >>> IGNORE= requires FreeBSD 5.1 or later >>> .endif >>> .else >>> LIB_DEPENDS+= c.3:${PORTSDIR}/misc/compat3x >>> .endif >>> >>> Abraços, >>> >>> Ari Arantes wrote: >>> >>> Não tinha pesquisado direito no histórico da lista Achei a solução do Luiz Otávio Souza: Tente assim: # cd /usr/ports/security/vscan E aplica esse patch: --- Makefile.orig Mon Nov 22 08:58:47 2004 +++ MakefileSat Apr 22 03:53:08 2006 @@ -19,7 +19,7 @@ RUN_DEPENDS+= ${LOCALBASE}/sbin/update_dat:${PORTSDIR}/security/uvscan-dat # misc/compat3x is forbidden, but if it is compiled into the system # we may still be good to go. -LIB_DEPENDS+= c.3:${PORTSDIR}/misc/compat3x +#LIB_DEPENDS+= c.3:${PORTSDIR}/misc/compat3x LIB_DEPENDS+= m.2:${PORTSDIR}/misc/compat4x ONLY_FOR_ARCHS=i386 Resumindo: basta comentar a linha LIB_DEPENDS+ = c.3 Depois o basico: # make install clean Nesse momento o uvscan ainda nao funciona: # uvscan /usr/libexec/ld-elf.so.1: Shared object "libc.so.3" not found, required by "uvscan" Então.. # ln -s /lib/libc.so.6 /lib/libc.so.3 ou melhor: # cat /etc/libmap.conf [/usr/local/libexec/uvscan/uvscan] libc.so.3 libc.so.6 Pronto.. o uvscan esta funcionando, sem usar o compat3 :) Se nao funcionar verifique se na sua versao do FreeBSD a lib disponivel tem o mesmo nome do meu exemplo (libc.so.6) pois isso muda pra cada verão (4.X, 5.X, 6.X e 7). 2006/11/28, Ari Arantes <[EMAIL PROTECTED]>: > Pessoal, > > Estou com dificuldades para instalar o vscan pelo ports. > > Rodei em /usr/ports/security/vscan > > make install clean > > Primeiro ele tentou instalar o compat3x, mas está desabilitado. Então > editei o Makefile em /usr/ports/misc/compat3x e comentei: > > #FORBIDDEN= "FreeBSD-SA-03:05.xdr, FreeBSD-SA-03:08.realpath - not > fixed / > no lib available" > > Rodei o make install novamente, mas aparece: > > > /usr/local/lib/compat/libc.so.3 (USES POSSIBLY INSECURE FUNCTIONS: mktemp) > > This port has installed the following startup scripts, which may > cause > these network services to be started at boot time. > /usr/local/etc/rc.d/000.compat3x.sh > > If there are vulnerabilities in these programs there may be a > security > risk to the system. FreeBSD makes no guarantee about the security of > ports included in the Ports Collection. Please type 'make deinstall' > to deinstall the port if this is a concern. > ===> Returning to build of uvscan-5.10e_1 > Error: shared library "c.3" does not exist > *** Error code 1 > > Também tentei pkg_add -r vscan e não existe. > > Como instalar o vscan? > > Acabei de atualizar o servidor: > 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #3: Tue Nov 28 18:51:18 BRDT 2006 > > []s, > > Ari > > > > - Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd >>> -- >>> >>> Flávio Alexsandro Silva >>> "Unix is user friendly. It's just selective about who its friends are." >>> "Linux is for people who hate Windows. >>> BSD is for people who love UNIX." >>> >>> - >>> Histórico: http://www.fug.com.br/historico/html/freebsd/ >>> Sair da lista: https://www.fug.com.br/m
Re: [FUG-BR] Instalação do vscan pelo ports
Naum sei lhe dizer... sempre que tenho algum problema com algum port, de praxe jah abro o Makefile e vejo os WITH e WITHOUT... exemplo: squid26stable2... tava com algo bem parecido e vi que tinha uma variavel que aceitava parametros para serem passados para o configure do squid... ae foi soh make -D"parametros" config all package clean blz?? Abraços, Ari Arantes wrote: > Flávio, > > Existe documentação para isso? Ou somente vi Makefile??? > > Deveria existir como costumar ter nos ./configure --help. > > []s, > > Ari > > > Em 29/11/06, Flavio Alexsandro Silva<[EMAIL PROTECTED]> escreveu: > >> Ari, >> >> Vc tambem pode fazer o seguinte: >> #cd /usr/ports/security/vscan >> #make -DWITHOUT_COMPAT3 all >> >> Pois no Makefile existe uma parte dele preparada pra essa condicao, >> nas versoes do FreeBSD 5.1 em diante... >> >> .if defined(WITHOUT_COMPAT3) >> .if ${OSVERSION} < 51 >> IGNORE= requires FreeBSD 5.1 or later >> .endif >> .else >> LIB_DEPENDS+= c.3:${PORTSDIR}/misc/compat3x >> .endif >> >> Abraços, >> >> Ari Arantes wrote: >> >>> Não tinha pesquisado direito no histórico da lista >>> >>> Achei a solução do Luiz Otávio Souza: >>> >>> >>> Tente assim: >>> >>> # cd /usr/ports/security/vscan >>> >>> E aplica esse patch: >>> >>> --- Makefile.orig Mon Nov 22 08:58:47 2004 >>> +++ MakefileSat Apr 22 03:53:08 2006 >>> @@ -19,7 +19,7 @@ >>> RUN_DEPENDS+= ${LOCALBASE}/sbin/update_dat:${PORTSDIR}/security/uvscan-dat >>> # misc/compat3x is forbidden, but if it is compiled into the system >>> # we may still be good to go. >>> -LIB_DEPENDS+= c.3:${PORTSDIR}/misc/compat3x >>> +#LIB_DEPENDS+= c.3:${PORTSDIR}/misc/compat3x >>> LIB_DEPENDS+= m.2:${PORTSDIR}/misc/compat4x >>> >>> ONLY_FOR_ARCHS=i386 >>> >>> >>> Resumindo: basta comentar a linha LIB_DEPENDS+ = c.3 >>> >>> >>> Depois o basico: >>> >>> # make install clean >>> >>> Nesse momento o uvscan ainda nao funciona: >>> >>> # uvscan >>> /usr/libexec/ld-elf.so.1: Shared object "libc.so.3" not found, required by >>> "uvscan" >>> >>> Então.. >>> >>> # ln -s /lib/libc.so.6 /lib/libc.so.3 >>> >>> ou melhor: >>> >>> # cat /etc/libmap.conf >>> [/usr/local/libexec/uvscan/uvscan] >>> libc.so.3 libc.so.6 >>> >>> >>> Pronto.. o uvscan esta funcionando, sem usar o compat3 :) >>> >>> Se nao funcionar verifique se na sua versao do FreeBSD >>> a lib disponivel tem o mesmo nome do meu exemplo >>> (libc.so.6) pois isso muda pra cada verão (4.X, 5.X, 6.X e 7). >>> >>> >>> >>> 2006/11/28, Ari Arantes <[EMAIL PROTECTED]>: >>> >>> Pessoal, Estou com dificuldades para instalar o vscan pelo ports. Rodei em /usr/ports/security/vscan make install clean Primeiro ele tentou instalar o compat3x, mas está desabilitado. Então editei o Makefile em /usr/ports/misc/compat3x e comentei: #FORBIDDEN= "FreeBSD-SA-03:05.xdr, FreeBSD-SA-03:08.realpath - not fixed / no lib available" Rodei o make install novamente, mas aparece: /usr/local/lib/compat/libc.so.3 (USES POSSIBLY INSECURE FUNCTIONS: mktemp) This port has installed the following startup scripts, which may cause these network services to be started at boot time. /usr/local/etc/rc.d/000.compat3x.sh If there are vulnerabilities in these programs there may be a security risk to the system. FreeBSD makes no guarantee about the security of ports included in the Ports Collection. Please type 'make deinstall' to deinstall the port if this is a concern. ===> Returning to build of uvscan-5.10e_1 Error: shared library "c.3" does not exist *** Error code 1 Também tentei pkg_add -r vscan e não existe. Como instalar o vscan? Acabei de atualizar o servidor: 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #3: Tue Nov 28 18:51:18 BRDT 2006 []s, Ari >>> - >>> Histórico: http://www.fug.com.br/historico/html/freebsd/ >>> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd >>> >>> >>> >>> >> -- >> >> Flávio Alexsandro Silva >> "Unix is user friendly. It's just selective about who its friends are." >> "Linux is for people who hate Windows. >> BSD is for people who love UNIX." >> >> - >> Histórico: http://www.fug.com.br/historico/html/freebsd/ >> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd >> >> > - > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > > > -- Flávio Alexsandro Silva "Unix is user friendly. It's just selective about who its friends are." "Linux is for people who hate Windows. BSD is for people who love UNIX." - Histórico: http://www.fug.com.br/historico
Re: [FUG-BR] Instalação do vscan pelo ports
Flávio, Existe documentação para isso? Ou somente vi Makefile??? Deveria existir como costumar ter nos ./configure --help. []s, Ari Em 29/11/06, Flavio Alexsandro Silva<[EMAIL PROTECTED]> escreveu: > Ari, > > Vc tambem pode fazer o seguinte: > #cd /usr/ports/security/vscan > #make -DWITHOUT_COMPAT3 all > > Pois no Makefile existe uma parte dele preparada pra essa condicao, > nas versoes do FreeBSD 5.1 em diante... > > .if defined(WITHOUT_COMPAT3) > .if ${OSVERSION} < 51 > IGNORE= requires FreeBSD 5.1 or later > .endif > .else > LIB_DEPENDS+= c.3:${PORTSDIR}/misc/compat3x > .endif > > Abraços, > > Ari Arantes wrote: > > Não tinha pesquisado direito no histórico da lista > > > > Achei a solução do Luiz Otávio Souza: > > > > > > Tente assim: > > > > # cd /usr/ports/security/vscan > > > > E aplica esse patch: > > > > --- Makefile.orig Mon Nov 22 08:58:47 2004 > > +++ MakefileSat Apr 22 03:53:08 2006 > > @@ -19,7 +19,7 @@ > > RUN_DEPENDS+= ${LOCALBASE}/sbin/update_dat:${PORTSDIR}/security/uvscan-dat > > # misc/compat3x is forbidden, but if it is compiled into the system > > # we may still be good to go. > > -LIB_DEPENDS+= c.3:${PORTSDIR}/misc/compat3x > > +#LIB_DEPENDS+= c.3:${PORTSDIR}/misc/compat3x > > LIB_DEPENDS+= m.2:${PORTSDIR}/misc/compat4x > > > > ONLY_FOR_ARCHS=i386 > > > > > > Resumindo: basta comentar a linha LIB_DEPENDS+ = c.3 > > > > > > Depois o basico: > > > > # make install clean > > > > Nesse momento o uvscan ainda nao funciona: > > > > # uvscan > > /usr/libexec/ld-elf.so.1: Shared object "libc.so.3" not found, required by > > "uvscan" > > > > Então.. > > > > # ln -s /lib/libc.so.6 /lib/libc.so.3 > > > > ou melhor: > > > > # cat /etc/libmap.conf > > [/usr/local/libexec/uvscan/uvscan] > > libc.so.3 libc.so.6 > > > > > > Pronto.. o uvscan esta funcionando, sem usar o compat3 :) > > > > Se nao funcionar verifique se na sua versao do FreeBSD > > a lib disponivel tem o mesmo nome do meu exemplo > > (libc.so.6) pois isso muda pra cada verão (4.X, 5.X, 6.X e 7). > > > > > > > > 2006/11/28, Ari Arantes <[EMAIL PROTECTED]>: > > > >> Pessoal, > >> > >> Estou com dificuldades para instalar o vscan pelo ports. > >> > >> Rodei em /usr/ports/security/vscan > >> > >> make install clean > >> > >> Primeiro ele tentou instalar o compat3x, mas está desabilitado. Então > >> editei o Makefile em /usr/ports/misc/compat3x e comentei: > >> > >> #FORBIDDEN= "FreeBSD-SA-03:05.xdr, FreeBSD-SA-03:08.realpath - not > >> fixed / > >> no lib available" > >> > >> Rodei o make install novamente, mas aparece: > >> > >> > >> /usr/local/lib/compat/libc.so.3 (USES POSSIBLY INSECURE FUNCTIONS: mktemp) > >> > >> This port has installed the following startup scripts, which may > >> cause > >> these network services to be started at boot time. > >> /usr/local/etc/rc.d/000.compat3x.sh > >> > >> If there are vulnerabilities in these programs there may be a > >> security > >> risk to the system. FreeBSD makes no guarantee about the security of > >> ports included in the Ports Collection. Please type 'make deinstall' > >> to deinstall the port if this is a concern. > >> ===> Returning to build of uvscan-5.10e_1 > >> Error: shared library "c.3" does not exist > >> *** Error code 1 > >> > >> Também tentei pkg_add -r vscan e não existe. > >> > >> Como instalar o vscan? > >> > >> Acabei de atualizar o servidor: > >> 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #3: Tue Nov 28 18:51:18 BRDT 2006 > >> > >> []s, > >> > >> Ari > >> > >> > > - > > Histórico: http://www.fug.com.br/historico/html/freebsd/ > > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > > > > > > > -- > > Flávio Alexsandro Silva > "Unix is user friendly. It's just selective about who its friends are." > "Linux is for people who hate Windows. > BSD is for people who love UNIX." > > - > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > - Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
Re: [FUG-BR] Instalação do vscan pelo ports
Ari, Vc tambem pode fazer o seguinte: #cd /usr/ports/security/vscan #make -DWITHOUT_COMPAT3 all Pois no Makefile existe uma parte dele preparada pra essa condicao, nas versoes do FreeBSD 5.1 em diante... .if defined(WITHOUT_COMPAT3) .if ${OSVERSION} < 51 IGNORE= requires FreeBSD 5.1 or later .endif .else LIB_DEPENDS+= c.3:${PORTSDIR}/misc/compat3x .endif Abraços, Ari Arantes wrote: > Não tinha pesquisado direito no histórico da lista > > Achei a solução do Luiz Otávio Souza: > > > Tente assim: > > # cd /usr/ports/security/vscan > > E aplica esse patch: > > --- Makefile.orig Mon Nov 22 08:58:47 2004 > +++ MakefileSat Apr 22 03:53:08 2006 > @@ -19,7 +19,7 @@ > RUN_DEPENDS+= ${LOCALBASE}/sbin/update_dat:${PORTSDIR}/security/uvscan-dat > # misc/compat3x is forbidden, but if it is compiled into the system > # we may still be good to go. > -LIB_DEPENDS+= c.3:${PORTSDIR}/misc/compat3x > +#LIB_DEPENDS+= c.3:${PORTSDIR}/misc/compat3x > LIB_DEPENDS+= m.2:${PORTSDIR}/misc/compat4x > > ONLY_FOR_ARCHS=i386 > > > Resumindo: basta comentar a linha LIB_DEPENDS+ = c.3 > > > Depois o basico: > > # make install clean > > Nesse momento o uvscan ainda nao funciona: > > # uvscan > /usr/libexec/ld-elf.so.1: Shared object "libc.so.3" not found, required by > "uvscan" > > Então.. > > # ln -s /lib/libc.so.6 /lib/libc.so.3 > > ou melhor: > > # cat /etc/libmap.conf > [/usr/local/libexec/uvscan/uvscan] > libc.so.3 libc.so.6 > > > Pronto.. o uvscan esta funcionando, sem usar o compat3 :) > > Se nao funcionar verifique se na sua versao do FreeBSD > a lib disponivel tem o mesmo nome do meu exemplo > (libc.so.6) pois isso muda pra cada verão (4.X, 5.X, 6.X e 7). > > > > 2006/11/28, Ari Arantes <[EMAIL PROTECTED]>: > >> Pessoal, >> >> Estou com dificuldades para instalar o vscan pelo ports. >> >> Rodei em /usr/ports/security/vscan >> >> make install clean >> >> Primeiro ele tentou instalar o compat3x, mas está desabilitado. Então >> editei o Makefile em /usr/ports/misc/compat3x e comentei: >> >> #FORBIDDEN= "FreeBSD-SA-03:05.xdr, FreeBSD-SA-03:08.realpath - not >> fixed / >> no lib available" >> >> Rodei o make install novamente, mas aparece: >> >> >> /usr/local/lib/compat/libc.so.3 (USES POSSIBLY INSECURE FUNCTIONS: mktemp) >> >> This port has installed the following startup scripts, which may cause >> these network services to be started at boot time. >> /usr/local/etc/rc.d/000.compat3x.sh >> >> If there are vulnerabilities in these programs there may be a security >> risk to the system. FreeBSD makes no guarantee about the security of >> ports included in the Ports Collection. Please type 'make deinstall' >> to deinstall the port if this is a concern. >> ===> Returning to build of uvscan-5.10e_1 >> Error: shared library "c.3" does not exist >> *** Error code 1 >> >> Também tentei pkg_add -r vscan e não existe. >> >> Como instalar o vscan? >> >> Acabei de atualizar o servidor: >> 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #3: Tue Nov 28 18:51:18 BRDT 2006 >> >> []s, >> >> Ari >> >> > - > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > > > -- Flávio Alexsandro Silva "Unix is user friendly. It's just selective about who its friends are." "Linux is for people who hate Windows. BSD is for people who love UNIX." - Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
Re: [FUG-BR] Instalação do vscan pelo ports
Não tinha pesquisado direito no histórico da lista Achei a solução do Luiz Otávio Souza: Tente assim: # cd /usr/ports/security/vscan E aplica esse patch: --- Makefile.orig Mon Nov 22 08:58:47 2004 +++ MakefileSat Apr 22 03:53:08 2006 @@ -19,7 +19,7 @@ RUN_DEPENDS+= ${LOCALBASE}/sbin/update_dat:${PORTSDIR}/security/uvscan-dat # misc/compat3x is forbidden, but if it is compiled into the system # we may still be good to go. -LIB_DEPENDS+= c.3:${PORTSDIR}/misc/compat3x +#LIB_DEPENDS+= c.3:${PORTSDIR}/misc/compat3x LIB_DEPENDS+= m.2:${PORTSDIR}/misc/compat4x ONLY_FOR_ARCHS=i386 Resumindo: basta comentar a linha LIB_DEPENDS+ = c.3 Depois o basico: # make install clean Nesse momento o uvscan ainda nao funciona: # uvscan /usr/libexec/ld-elf.so.1: Shared object "libc.so.3" not found, required by "uvscan" Então.. # ln -s /lib/libc.so.6 /lib/libc.so.3 ou melhor: # cat /etc/libmap.conf [/usr/local/libexec/uvscan/uvscan] libc.so.3 libc.so.6 Pronto.. o uvscan esta funcionando, sem usar o compat3 :) Se nao funcionar verifique se na sua versao do FreeBSD a lib disponivel tem o mesmo nome do meu exemplo (libc.so.6) pois isso muda pra cada verão (4.X, 5.X, 6.X e 7). 2006/11/28, Ari Arantes <[EMAIL PROTECTED]>: > Pessoal, > > Estou com dificuldades para instalar o vscan pelo ports. > > Rodei em /usr/ports/security/vscan > > make install clean > > Primeiro ele tentou instalar o compat3x, mas está desabilitado. Então > editei o Makefile em /usr/ports/misc/compat3x e comentei: > > #FORBIDDEN= "FreeBSD-SA-03:05.xdr, FreeBSD-SA-03:08.realpath - not fixed > / > no lib available" > > Rodei o make install novamente, mas aparece: > > > /usr/local/lib/compat/libc.so.3 (USES POSSIBLY INSECURE FUNCTIONS: mktemp) > > This port has installed the following startup scripts, which may cause > these network services to be started at boot time. > /usr/local/etc/rc.d/000.compat3x.sh > > If there are vulnerabilities in these programs there may be a security > risk to the system. FreeBSD makes no guarantee about the security of > ports included in the Ports Collection. Please type 'make deinstall' > to deinstall the port if this is a concern. > ===> Returning to build of uvscan-5.10e_1 > Error: shared library "c.3" does not exist > *** Error code 1 > > Também tentei pkg_add -r vscan e não existe. > > Como instalar o vscan? > > Acabei de atualizar o servidor: > 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #3: Tue Nov 28 18:51:18 BRDT 2006 > > []s, > > Ari > - Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
[FUG-BR] Instalação do vscan pelo ports
Pessoal, Estou com dificuldades para instalar o vscan pelo ports. Rodei em /usr/ports/security/vscan make install clean Primeiro ele tentou instalar o compat3x, mas está desabilitado. Então editei o Makefile em /usr/ports/misc/compat3x e comentei: #FORBIDDEN= "FreeBSD-SA-03:05.xdr, FreeBSD-SA-03:08.realpath - not fixed / no lib available" Rodei o make install novamente, mas aparece: /usr/local/lib/compat/libc.so.3 (USES POSSIBLY INSECURE FUNCTIONS: mktemp) This port has installed the following startup scripts, which may cause these network services to be started at boot time. /usr/local/etc/rc.d/000.compat3x.sh If there are vulnerabilities in these programs there may be a security risk to the system. FreeBSD makes no guarantee about the security of ports included in the Ports Collection. Please type 'make deinstall' to deinstall the port if this is a concern. ===> Returning to build of uvscan-5.10e_1 Error: shared library "c.3" does not exist *** Error code 1 Também tentei pkg_add -r vscan e não existe. Como instalar o vscan? Acabei de atualizar o servidor: 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #3: Tue Nov 28 18:51:18 BRDT 2006 []s, Ari - Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd