Yes, LoraWan is for low volume data traffic, such as sensors. Cycle
rate should be at 1% to the most, so the idea is that the sensor give
their value, including some hand-shaking, (e.g. temperature) and that's
it. In the other direction there is handshaking and occasionally
firmware upgrades for
re-install mediawiki via Plinth, I think. How do I
make Plinth understand mediawiki is not installed? I could remove it
via aptitude to have a clean situation.
Dietmar
Am Sonntag, den 18.03.2018, 13:53 +0100 schrieb permondes - sagen:
> Here is kind of solution for this: https://www.mediawiki.or
under 7.2 and not 7.0?
mediawiki is stretching my nerves. Am I the only one using it???
Dietmar
Am Samstag, den 17.03.2018, 17:39 +0100 schrieb permondes - sagen:
> There is a broken link for LocalSettings.php. The file does not exist
> in the target directory. There is only file mediawik
Hi,
I received the following error when trying to install mediawiki. I am
on Plinth 0.24 (testing). Downloading worked, the error appeared versus
the end of the installation process.
> [2018-03-17 09:55:30,199] plinth.actions INFO Executing command -
> ['sudo', '-n',
With version 0.20 we have 2 wikis in Freedombox: ikiwiki and mediawiki.
I think we should provide guidance to our users which one to use when.
I made myself familiar with ikiwiki (running a homepage on it now) and
I know mediawiki from Wikipedia.
So I'd like to collect material for our manual.
Hi Joseph,
Am Donnerstag, den 07.12.2017, 11:22 +0530 schrieb Joseph Nuthalapati:
> Adding to Daddy's reply.
>
>
>
> We have plans for including a blog application with FreedomBox,
> but
> if you want to host a website, you can simply host it from Apache
> by
> adding the
Hi Josh,
Am Mittwoch, den 29.11.2017, 13:09 -0500 schrieb Josh Blagden:
> Hi guys,
>
> I just joined the mailing list. I'm
> interested in setting up a Freedombox, but I'm afraid that
> its
> range may be insufficient and I also prefer wired Internet
> connections
Am Mittwoch, den 22.11.2017, 22:10 +0100 schrieb permondes - sagen:
> Am Mittwoch, den 22.11.2017, 21:51 +0100 schrieb permondes - sagen:
> > Am Mittwoch, den 22.11.2017, 20:57 +0100 schrieb permondes - sagen:
> > > Hi,
> > >
> > > creating a Use
Am Mittwoch, den 22.11.2017, 21:51 +0100 schrieb permondes - sagen:
> Am Mittwoch, den 22.11.2017, 20:57 +0100 schrieb permondes - sagen:
> > Hi,
> >
> > creating a User in Plinth 0.16 gives this feedback:
> > * Creating LDAP user failed.
> > * User
Hi,
creating a User in Plinth 0.16 gives this feedback:
* Creating LDAP user failed.
* User hahaha created.
Changing the password afterwards fails the LDAP operation but works
successful (as 2nd message).
Issue is, that I am trying to set up another user for a radicale
calendar. Trying to
So I am setting up the box again. 1st step is to expand the 4 GB
partition to cover the entire 32 GB card. However, as the error
correctly says, the partition is being used: by Plinth from which I
started the DISKS command, I assume:
> Error expanding partition: ('disks', '', "Warning:
>
in the network?
>
> Dietmar
>
> Am 7. Februar 2017 13:58:06 MEZ schrieb James Valleroy
> <jvalle...@mailbox.org>:
> On 02/05/2017 11:55 AM, permondes - sagen wrote:
>
> I just tried the LIME image, i
Am Dienstag, den 07.02.2017, 19:15 -0500 schrieb James Valleroy:
> On 02/07/2017 11:35 AM, sa...@permondes.de wrote:
> > Mmh, I will try again end of the week.
> >
> > I understood the initial set up is a 2 step process. Can I check if it
> > did the first step before the reboot?
> > How long
Am Freitag, den 03.02.2017, 17:33 -0500 schrieb James Valleroy:
> Hello,
>
> I have uploaded new images based on Debian testing for all targets
> supported by freedom-maker:
>
> ftp://ftp.freedombox.org/pub/freedombox/testing-20170202/
>
> Please help in testing these images.
>
> Some pages on
Am Samstag, den 04.02.2017, 21:11 -0500 schrieb A. F. Cano:
> On Sat, Feb 04, 2017 at 02:30:58PM -0500, James Valleroy wrote:
> > On 02/04/2017 01:52 PM, A. F. Cano wrote:
> > > === Android log
> > >...
> > > 2017-01-28 20:33:55 2 [ui.setup.DavResourceFinder]
Am Samstag, den 14.01.2017, 11:36 -0500 schrieb James Valleroy:
> On 01/13/2017 07:53 AM, James Valleroy wrote:
> > Just a reminder of upcoming calls:
> > - Hack call is tomorrow, Jan. 14, at 14;00 UTC.
> > - Progress call is Jan. 22 at 18:00 UTC.
> >
> > Please add any agenda items to the list:
>
Am Sonntag, den 08.01.2017, 09:17 +0100 schrieb permondes - sagen:
> Am Samstag, den 07.01.2017, 23:12 +0100 schrieb Jonas Smedegaard:
> > Quoting permondes - sagen (2017-01-07 21:43:59)
> > > Am Samstag, den 07.01.2017, 15:01 -0500 schrieb James Valleroy:
> > >
>
Am Samstag, den 07.01.2017, 23:12 +0100 schrieb Jonas Smedegaard:
> Quoting permondes - sagen (2017-01-07 21:43:59)
> > Am Samstag, den 07.01.2017, 15:01 -0500 schrieb James Valleroy:
> >
> > > On 01/07/2017 09:21 AM, permondes - sagen wrote:
> > > > The cu
Am Samstag, den 07.01.2017, 15:01 -0500 schrieb James Valleroy:
> On 01/07/2017 09:21 AM, permondes - sagen wrote:
> > The currently running boot.scr with kernel 4.3:
> >
> >> ...:/boot$ cat boot.scr
> >> 'V=�ѠV����#�Bi�setenv mmcdev 0
> >> sete
Am Samstag, den 07.01.2017, 14:59 +0100 schrieb Jonas Smedegaard:
> Quoting permondes - sagen (2017-01-07 14:31:34)
> > Am Samstag, den 07.01.2017, 18:24 +0530 schrieb Sunil Mohan Adapa:
> >
> > > On 01/07/2017 06:17 PM, permondes - sagen wrote:
> > > [...]
>
Am Samstag, den 07.01.2017, 18:24 +0530 schrieb Sunil Mohan Adapa:
> On 01/07/2017 06:17 PM, permondes - sagen wrote:
> [...]
> > But the device does not boot!
> > I can unplug the micro-SD card to check some log files on my computer, do
> > you have an idea where to s
Am Samstag, den 07.01.2017, 12:07 +0100 schrieb Jonas Smedegaard:
> Quoting permondes - sagen (2017-01-07 10:39:28)
> > Am Samstag, den 07.01.2017, 12:17 +0530 schrieb Sunil Mohan Adapa:
> >
> > > On 01/07/2017 05:43 AM, Jonas Smedegaard wrote:
> > > [...]
> &
Am Samstag, den 07.01.2017, 12:17 +0530 schrieb Sunil Mohan Adapa:
> On 01/07/2017 05:43 AM, Jonas Smedegaard wrote:
> [...]
> >> So it is still booting the 4.3 kernel, which is unknown to aptitude.
> >
> > Seems your hardware is ARM-based. Commonly ARM-based hardware need the
> > package
Am Freitag, den 06.01.2017, 20:25 +0100 schrieb permondes - sagen:
> Am Freitag, den 06.01.2017, 18:41 +0100 schrieb permondes - sagen:
>
> > Am Freitag, den 06.01.2017, 16:35 +0100 schrieb Petter
> > Reinholdtsen:
> >
> > > [permondes - sagen]
> > >
Am Freitag, den 06.01.2017, 18:41 +0100 schrieb permondes - sagen:
> Am Freitag, den 06.01.2017, 16:35 +0100 schrieb Petter Reinholdtsen:
>
> > [permondes - sagen]
> > > I think that with the kernel and initrd-updates the old version were not
> > > removed. Can
Am Freitag, den 06.01.2017, 16:35 +0100 schrieb Petter Reinholdtsen:
> [permondes - sagen]
> > I think that with the kernel and initrd-updates the old version were not
> > removed. Can I simply remove them with "rm"? Just keeping the latest
> > version?
>
>
My boot partition is full, so the latest kernel and uboot updates could
not be installed. The partition contains:
boot.cmd config-4.8.0-1-armmp-lpae
initrd.img-4.7.0-1-armmp-lpae System.map-4.7.0-1-armmp-lpae
vmlinuz-4.7.0-1-armmp-lpae
boot.scr
I just let radicale get updated, which was held back since 6-Dec. Now I
cannot access the calender file any more, but it is still existing.
I checked the "config" file and found it is mostly just comments. These
parameters are not set any more:
> [server]
> hosts= ...
> base_prefix=
>
Am Montag, den 21.11.2016, 01:18 +0100 schrieb Bastien Rocheron:
> Hello again,
>
> Something very strange happened. As I was logged in through SSH trying
> to understand this issue, suddenly my user was not recognized any more
> and I received a message close to something like: user 1000
Am Samstag, den 19.11.2016, 08:55 -0500 schrieb James Valleroy:
> On 11/19/2016 06:24 AM, permondes - sagen wrote:
> > firewalld has a conffile prompt and I am not sure which version I should
> > use. The changes are:
> >
> >> -DefaultZone=external
> >>
firewalld has a conffile prompt and I am not sure which version I should
use. The changes are:
> -DefaultZone=external
> +DefaultZone=public
> IPv6_rpfilter=yes
> +IndividualCalls=no
> +LogDenied=off
Is it save to take the new settings or will e.g. DefaultZone impact
FreedomBox?
Dietmar
Am Dienstag, den 08.11.2016, 15:52 -0500 schrieb A. F. Cano:
> On Mon, Nov 07, 2016 at 07:51:30PM +0100, permondes - sagen wrote:
> >...
> > I have been using Bookmarks (Shaarli) from the inside network for a
> > while now. I haven't noticed anything t
Am Sonntag, den 06.11.2016, 23:30 -0500 schrieb A. F. Cano:
> On Sun, Nov 06, 2016 at 02:37:24PM +0100, permondes - sagen wrote:
> >Hi Augustine,
> >
> >which service are you trying to access? E.g. Plinth cannot be accessed
> >from outside of your loca
Hi Augustine,
which service are you trying to access? E.g. Plinth cannot be accessed
from outside of your local network, this gives error 403, but e.g.
ikiwiki should work.
I also have now 2 network connections: eth0 active, Freedombox inactive.
This used to cause issues in the past and I had
Am Montag, den 10.10.2016, 17:39 + schrieb dgj+li...@systemli.org:
> > Also if someone is looking to contribute, we can help them find an
> > appropriate task.
>
> I was unable to attend the hack call but would be interested in
> contributing to the FBX manual. What is the etiquette for
I think, we could integrate the "Security" section into "Users".
>From a users perspective, the security feature is related to how users
are handled in Freedombox, so he would search for it in that section.
Also, there is just one setting in the security section and the overview
of available
Is my Quassel-core down or is there an issue with irc.debian.org?
> Connecting to irc.debian.org/freedombox:6667...
> Connection failure: Host not found
>
Dietmar
___
Freedombox-discuss mailing list
Freedombox-discuss@lists.alioth.debian.org
37 matches
Mail list logo
